Since we now ship frr with Proxmox VE, the frr service is available on
the nodes but disabled on install. Prior to that, users had to
manually install frr, which automatically enabled the service. When
first applying a SDN configuration with an EVPN controller, we always
fell back to restarting the frr service, because reloading fails when
the daemon isn't running. This fallback to restarting leads to the
service running but still being in the disabled state. This means that
the EVPN setup is working until the next reboot. To avoid the
situation where users configure an EVPN controller and everything
seems to be working, until a restart breaks the EVPN setup,
additionally enable and start the frr service before trying to reload
the configuration.
We enable the service after checking for the existence of
frr-pythontools in order to avoid the situation where users apply an
SDN configuration with an EVPN controller, but reloading fails due to
a missing frr-pythontools package. Since we do an early return there,
we never fell back to restarting the service in case frr-pythontools
was not available. If we enabled the service before the check, the
configuration would apply after a reboot since it already got written
to the frr configuration file.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Prior to the upgrade to frr-pythontools 10.2.1, frr-reload.py did not
print any output to STDOUT, which masked the erroneous outfunc
provided in run_command. With 10.2.1 frr-reload.py now prints to
STDOUT, which triggers the codepath for invoking the outfunc, leading
to an error when invoking frr-reload.py. By removing the outfunc the
invocation works again.
In addition to fixing the regression introduced, we also now print the
frr-reload.py informational output to the tasklog, which can be
helpful in debugging any issues when reloading the frr configuration.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
The hostname provided to the methods in the IPAM plugins is empty for
VMs that do not have a name set. We always included the dns_name key
in the request, even if it was undefined, which leads Netbox to return
a 400 Bad Request error. With this patch we omit the dns_name
parameter if it isn't set, so the call succeeds.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Link: https://lore.proxmox.com/20250408132517.225240-1-s.hanreich@proxmox.com
Check for overlapping DHCP ranges and reject them if there are any
overlaps. If we can be certain that there are no overlapping DHCP
ranges this saves us from running into errors later in IPAM modules
where overlapping DHCP ranges are not allowed.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250307125056.169575-4-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Net::IP accepts a myriad of different IP objects from ranges to
prefixes to singular IPs. We check if the object consists only of a
singular IP and normalize the IP if it has size 1 (since then it
could still be a /32 prefix or a range consisting of one IP).
Otherwise we would theoretically accept any valid Net::IP object here.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250307125056.169575-3-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This simplifies the comparison of IPs by using the object-oriented
interface over the procedural one. Also instantiate the ips using the
new method rather than using new, which isn't a keyword in Perl. This
fixes the respective perlcritic warning.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250307125056.169575-1-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
- allocating IPs also when prefix-only
- PVE IPAM register details for every allocation strategy
Signed-off-by: lou lecrivain <lou.lecrivain@wdz.de>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Reviewed-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/mailman.185.1734119199.332.pve-devel@lists.proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(configure_range is now noop)
Signed-off-by: lou lecrivain <lou.lecrivain@wdz.de>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Reviewed-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/mailman.183.1734119197.332.pve-devel@lists.proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Because of how the Netbox IPAM plugin works (utilizing IP ranges to
represent DHCP ranges), we need a hook in the IPAM plugin that runs on
updates to the subnet because DHCP ranges can be edited. The update
hook in Netbox checks which DHCP ranges got added and which got
deleted and then performs the respective changes in the Netbox IPAM.
This operates under the assumption that DHCP ranges do not overlap
(which is not supported by Netbox anyway).
Only Netbox needs to do work on update, so we can leave this as noop
in phpIPAM and the PVE IPAM, because they have no notion of IP ranges
or similar entities. phpIPAM doesn't support DHCP ranges at all and
PVE IPAM simply uses DHCP ranges as a constraint when allocating an
IP.
I decided on this approach over just creating IP ranges on demand when
assigning IPs, because this keeps Netbox clean and in sync with the
PVE state. It doesn't leave remnants of IP ranges in the Netbox
database, which can lead to errors when trying to create IP ranges
that overlap with IP ranges that already existed in an SDN subnet.
This method tries to check for any possible errors before editing the
entities. There is still a small window where external changes can
occur that lead to errors. We are touching multiple entities here, so
in case of errors users have to fix their Netbox instance manually.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-8-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We use the IP ranges of netbox to represent the dhcp ranges. We were
already querying the IP ranges for a IP when starting a guest, but we
never created the IP ranges in the first place. Additionally implement
deleting the IP ranges when the subnet gets deleted.
These methods try to check for any possible errors before editing the
entities. There is still a small window where external changes can
occur that lead to errors. We are touching multiple entities here, so
in case of errors users have to fix their Netbox instance manually.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-7-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The netbox integration did not properly return the IP when creating
the entries in netbox. This lead to errors on starting the guest,
stating that an IP could not be allocated.
Originally-by: lou lecrivain <lou.lecrivain@wdz.de>
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-6-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This function did not catch any possible errors, nor respect the
$noerr parameter.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-5-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
While it should make practically no difference, it opens up potential
errors in the future, so just remove the conditional assignments and
explicitly define the variable as undef, so the intention is more
clear.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-4-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The helpers had lots of unnecessary intermediate assignments, which we
can just simplify.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-3-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Deleting a subnet did not delete any created entities in Netbox.
Implement deletion of a subnet by deleting all entities that are
created in Netbox upon creation of a subnet.
We are checking for any leftover IP assignments before deleting the
prefix, so we do not accidentally delete any manually created IP
assignments.
This method tries to check for any possible errors before editing the
entities. There is still a small window where external changes can
occur that lead to errors. We are touching multiple entities here, so
in case of errors users have to fix their Netbox instance manually.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-2-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Create a helper method that abstracts the common code used in making
netbox requests. Move all api_request incovations over to using the
helper method. This saves us from writing lots of repeated code.
This also updates the helpers and introduces error checking there.
Helpers didn't catch any errors and the invoking methods didn't as
well. This meant that functions with $noerr set to 1 would still error
out. We now pass $noerr to the helper functions and they behave the
same as the parent methods. This requires some additional checks in
the call sites of the helpers.
Also canonicalize all URLs, since Netbox does that and it saves us a
redirect.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Hannes Duerr <h.duerr@proxmox.com>
Link: https://lore.proxmox.com/20250310085103.30549-1-s.hanreich@proxmox.com
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Currently pve-network has a (versioned) build-dep of pve-firewall, which has
a (versioned) runtime dependency of a newer version of libpve-network-perl,
which is not available because it has not been built. It turns out that
pve-firewall is only needed in testing, so let's only pull it in if
we don't use the "nocheck" build profile so that we can actually build
pve-network from source.
perl is a build-essential so no need to add it in build-deps.
Fixes: cbc70c81b9
Signed-off-by: Jing Luo <jing@jing.rocks>
Link: https://lore.proxmox.com/mailman.599.1732342430.391.pve-devel@lists.proxmox.com
This fixes an issue with dual stacking, when using a zone with both a
IPv4 and IPv6 subnet and the same DNS suffix, pve-network will try to
set both DNS records (type A and AAAA) in the same powerdns rrset,
causing an API error, and effectively causing no forward DNS records
being created.
This change edits the `get_zone_rrset` function so that it takes the
DNS record type into account.
Signed-off-by: Matthieu Pignolet <m@mpgn.dev>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
[TL: wrap commit message]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
No point in having the same generic code to prepare variables for an
API request to PowerDNS 7 times basically duplicated.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Currently, we do not verify the TLS certificate for API requests
external IPAM and DNS integration. This could allow man-in-the-middle
attacks, albeit most IPAM infrastructure is on controlled and isolated
LANs, so it's not something that should frequently happen; and
technically our IPAM integration is still marked as tech-preview,
which had its reasons.
Enforce verification, and allow users to pass a cert SHA256
fingerprint to ensure a certificates validity if it's not trusted by
the system trust store, as it's, e.g., the case for self-signed certs.
The code was adapted from the one in pve-apiclient, which we cannot
reuse directly as it is only implemented for requests against PVE
nodes, not as a generic HTTP client request helper.
Add the new dependency `libio-socket-ssl-perl` required to get the
verify callback for the TLS certificate used for cert-fingerprint
checking.
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
[TL: return valid for non-leaf certs and rewrite commit message]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid using a regex if we have a builtin function ready to use.
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
[TL: touch up commit message]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
[TL: drop all other unused Dumper use statements]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The conditional assignment caused falsy values to be converted to
undef when comparing them. This led to the behavior that configuration
values that are interpreted by perl as falsy would get wrongly
compared and always show up as pending changes.
As an example the 'bgp-multipath-as-path-relax' or 'ebgp' keys of the
bgp controller configuration are booleans and get stored as 0 in the
controller configuration when they're turned off. They always showed
up as a pending change, because of the behavior described above.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
failing a package-install does not help repairing the situation - so
inform the user about the issue instead of erroring out. The copy
could fail if a node is not quorate, so writes in /etc/pve are a bit
more likely to fail
adapts the change introduced in
d0628df ("debian: migrate legacy mac/ipam cache/state files")
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
We opted for a simple copy of the legacy file to the new location,
since any other migration path would be too strenuous. The worst-case
scenario of failures with this approach is losing IPAM / MAC entries
that are created during the update window in the legacy files by nodes
that are not yet updated to the new version. Those can be fixed by a
simple start / stop of the affected VMs, triggering a rewrite of the
IPAM database.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
[ TL: output message if files get moved and add todo-comment ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We mount the per-vnet firewall API endpoints here now, as we split api
and implementation we can avoid a cyclic dependency.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
follows commit:
0f48bc6 ("ipam: move state file of PVE plugin over to common sdn directory")
as far as reasoning goes, and also closely code-wise (if only to make
the clean-up with PVE 9.0 a bit more straight-forward):
files in priv/ are sensitive in the sense that access there can be
used to hijack (external systems) - the mac-cache can be kept next to
the remaining sdn-config.
minimally tested on my machine.
depends on the pve-cluster commit sent with this.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
This is not yet marked as released as the bump was mostly done to
allow testing with correct version for the package split's
break/replaces.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
To better handle the case where firewall requires to parse the SDN
config and this package here would like to mount some vnet specific
firewall endpoints, without a split we got a cyclic dependency here,
and those are painful, especially on bootstrapping.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Add support for bridge ports isolation
7d850abd5f
This allow to drop traffic between all ports having isolation enabled
on the local bridge, but allow traffic with non isolated ports.
Here,we isolate traffic between vms but allow traffic coming from outside.
Main usage is for layer3 routed or natted setup, but some users have requested it
for layer2/bridge network with proxy arp.
So we can enable it at vnet level.
Signed-off-by: Alexandre Derumier <alexandre.derumier@groupe-cyllene.com>
[ SH: improve option naming and description slightly ]
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
matthieu