When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_node that we are working on is going to be interesting
to the kernel_route_rib_pass_fail. So I am setting up the
code to allow me to pass it. This will be done in a subsuquent
commit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are certain interfaces that when brought up and we receive
the netlink notification about it, the speed of the interface is
not set correctly. This creates a one-shot thread that will
wait 15 seconds and then requery the speed and if it is different
it will renotify the running daemons.
The kernel should notify us on speed changes, unfortunately this
is not done currently via a netlink message as you would think.
As I understand it there is some in-fighting about the proper
way to approach this issue and due to the way the kernel release
cycle works we are a ways off from getting this fixed. This
is a `hack` to make us work correctly while we wait for the
true answer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Setup a interface such that the add/del of lsp's from
the kernel can have a callback for success/failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a route is installed or deleted into the kernel allow a
callback mechanism to handle the success/failure of
the kernel call.
This separation is to allow us to do these things:
1) In the future create a true pthread to handle route
install/deletes. This way we can schedule these
events in a smarter fashion
2) Allow us to use a common southbound api for route
install and deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SET_FLAG(nexthop->flags, NEXTHOP_FLAG_FIB)
is already taken care of in zebra_rib.c. There
is no need for this to be handled by rt_socket.c.
rt_netlink.c does not do a SET_FLAG(nexthop->flags, NEXTHOP_FLAG_FIB)
for route installation. Please note it does do it for a mpls
labeled route installation, which will be fixed in a future
commit.
Remove some dead code from 2002 as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists situations where it is possible to have duplicate
nexthops passed from a higher level protocol into zebra.
This code notices this duplication of nexthops and marks
the duplicates as DUPLICATE so we don't attempt to install
it into the kernel.
This is important on *BSD as I understand it because passing
duplicate nexthops will cause the route to be rejected.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* Bump MPLS_MAX_LABELS from 2 to 16;
* Adjust the static_nh_label structure and the mpls_label2str() function;
* On OpenBSD, print an error message when trying to push more than one
label at once (kernel limitation). While here, add support for MPLSv6
FTNs in OpenBSD.
This is not the full package. We still can't pop multiple labels at once,
or do things like swap a label and push other ones. We'll address that
in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This current implementation unfortunately must
ask the kernel for all mroutes because vrf's
do not have the ability to request a single
mroute at this time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for sticky (static) MACs. This includes the following:
- Recognize MAC is static (using NUD_NOARP flag) and inform BGP
- Construct MAC mobility extended community for sticky MACs as per
RFC 7432 section 15.2
- Inform to zebra that remote MAC is sticky, where appropriate
- Install sticky MACs into the kernel with the right flag
- Appropriate handling in route selection
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The code to collect the sg stats was written for linux.
Abstract the call to allow it to work on all platforms.
I have not implemented the call for non-linux systems.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
