This split is introducing logicalrouter.[ch] as the file that contains
the vty commands to configure logical router feature. The split has as
consequence that the backend of logical router is linux_netns.c formerly
called ns.c. The same relationship exists between VRF and its backend
which may be linux_netns.c file.
The split is adapting ns and vrf fiels so as to :
- clarify header
- ensure that the daemon persepctive, the feature VRF or logical router
is called instead of calling directly ns.
- this implies that VRF will call NS apis, as logical router does.
Also, like it is done for default NS and default VRF, the associated VRF
is enabled first, before NETNS is enabled, so that zvrf->zns pointer is
valid when NETNS discovery applies.
Also, other_netns.c file is a stub handler that will be used for non
linux systems. As NETNS feature is only used by Linux, some BSD systems
may want to use the same backend API to benefit from NETNS. This is what
that file has been done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an implementation of draft-ietf-ospf-segment-routing-extensions-24
and RFC7684 for Extended Link & Prefix Opaque LSA.
Look to doc/OSPF_SR.rst for implementation details & known limitations.
New files:
- ospfd/ospf_sr.h: Segment Routing structure definition (SubTLVs + SRDB)
- ospfd/ospf_sr.c: Main functions for Segment Routing support
- ospfd/ospf_ext.h: TLVs and SubTLVs definition for RFC7684
- ospfd/ospf_ext.c: RFC7684 Extended Link / Prefix implementation
- doc/OSPF-SRr.rst: Documentation
Modified Files:
- doc/ospfd.texi: Add new Segment Routing CLI command definition
- lib/command.h: Add new string command for Segment Routing CLI
- lib/mpls.h: Add default value for SRGB
- lib/route_types.txt: Add new OSPF Segment Routing route type
- ospfd/ospf_dump.[c,h]: Add OSPF SR debug
- ospfd/ospf_memory.[c,h]: Add new Segment Routing memory type
- ospfd/ospf_opaque.[c,h]: Add ospf_sr_init() starting function
- ospfd/ospf_ri.c: Add new functions to Set/Get Segment Routing TLVs
Add new ospf_router_info_lsa_upadte() to send Opaque LSA to ospf_sr.c()
- ospfd/ospf_ri.h: Add new Router Information SR SubTLVs
- ospfd/ospf_spf.c: Add new scheduler when running SPF to trigger
update of NHLFE
- ospfd/ospfd.h: Add new thread for Segment Routing scheduler
- ospfd/subdir.am: Add new files
- vtysh/Makefile.am: Add new ospf_sr.c file for vtysh
- zebra/kernel_netlink.c: Add new OSPF_SR route type
- zebra/rt_netlink.[c,h]: Add new OSPF_SR route type
- zebra/zebra_mpls.h: Add new OSPF_SR route type
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The constant to limit # of allowed cli tokens on any one line was
defined in multiple places, all inconsistent with each other. Fix.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit adds support for the RTR protocol to receive ROA
information from a RPKI cache server. That information can than be used
to validate the BGP origin AS of IP prefixes.
Both features are implemented using [rtrlib](http://rtrlib.realmv6.org/).
Signed-off-by: Marcel Röthke <marcel.roethke@haw-hamburg.de>
We expect that the index value passed in for argv_find
should be initially set to 0. This way if the cli
ever changes there is no need to modify the initial
value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This fixes the following
cel-redxp-10# show debugging
Debugging Information for zebra:
Zebra debugging status:
Debugging Information for bgpd:
BGP debugging status:
Debugging Information for watchfrr:
% Command incomplete.
% Command incomplete.
cel-redxp-10#
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Set default hostname in frr to unix hostname.
Provide APIs to get the hostname/domaninanme
Use this APIs where needed
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Multi-Instance OSPF configuration CLI would fail because
first client return error upon seeing qobj_index being 0.
With new marco generate new error code to return from each
instance (vtysh client) and if the command is intended for given
instance, its qobj_index would be nonzero and process the command
and push correct ospf context. Other instance would return the error.
On vtysh end, check all instance return an error log a message to a
file.
Testing Done:
Verfied various MI-OSPF configuration CLI with multi instances.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Adds an array of descriptive names for each CLI node, plus a runtime
check to make sure folks don't forget to update it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Pretty-prints variable autocompletions by breaking them up into multiple
lines, indenting them consistently and respecting the column width of
the terminal.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Restoring some code that was unintentionally removed when we were
migrating to Quentin's parser.
Adds "DEFPY()" which invokes an additional layer of preprocessing, so
that we get pre-parsed and named function arguments for the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Shows known values in the appropriate naming domain when the user hits
<?> or <Tab>. This patch only works in the telnet CLI, the next patch
adds vtysh support.
Included completions:
- interface names
- route-map names
- prefix-list names
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Put core CLI graph stuff in lib/command_graph.[ch] and consistently
prefix all function names with "cmd_".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
struct cmd_token now has a "varname" field which is derived from the
DEFUN's string definition. It can be manually specified with "$name"
after some token, e.g. "foo WORD$var". A later commit adds code to
automatically fill the value if nothing is specified.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a direct copy of:
https://github.com/boutier/quagga-merge
From the branch babel-merge
I copied the babeld directory into FRR and then fixed up everything to
compile.
Babeld at this point in time when run will more than likely crash and burn
in it's interfactions with zebra.
I might have messed up the cli, which will need to be looked at
extract.pl.in and vtysh.c need to be fixed up. Additionally we probably
need to work on DEFUN_NOSH conversion in babeld as well
This code comes from:
Matthieu Boutier <boutier@irif.fr>
Juliusz Chroboczek <jch@irif.fr>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the UNDEFINED_NODE as that it's implementation breaks
our ability in BGP to figure out where we are by allowing
default: in the switch statement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Please Note, I will be redoing this commit message with
more information.
Additionally I will rework the lib/* changes into their
own commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Merge the parsed graph into the existing one as a separate step. This
makes it possible to merge identical subgraphs, which is used e.g. in
bgpd for <A.B.C.D|X:X::X:X|WORD> neighbor names.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To make it possible for testcli to get a clean memory management bill.
(Note: XFREE() is NULL-safe, just like free().)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
command.c had:
DEFINE_MTYPE_STATIC(LIB, CMD_TOKENS, "Command desc")
while command_match.c had:
DEFINE_MTYPE_STATIC(LIB, CMD_TOKENS, "Command Tokens")
... which means that there are 2 distinct MTYPE_CMD_TOKENS.
(The description text being different does not matter, even with the
same text it'd be 2 distinct types.)
command_match.c allocates token->arg in command_match_r() while
command.c frees it in del_cmd_token(). Therefore with each command
being executed, the allocation count goes up on one, down on the other.
=> clean up parser allocation counting. Also, use separate MTYPEs for
the different fields in struct cmd_token.
Fixes: #108 / ee9216cf ("lib, ripngd: clean up merge leftovers")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Cc: Quentin Young <qlyoung@cumulusnetworks.com>
Also adds "grammar access <node>" to test/dump an existing command node
(e.g. BGP_NODE).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This associates pairs of FORK and JOIN tokens, so the merge function can
identify where a subgraph begins and ends.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
struct cmd_element items are static global variables, they are never
allocated, copied or freed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The function prototype for command_parse_format() is better left in
command.h, so that the bison-generated header file doesn't need to be
included for that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These are not externally referenced anymore; this reduces the symbol
count of libzebra by quite a bit.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
vtysh's extract.pl script doesn't cope with install_element(var, ) where
"var" is not one of the FOO_NODE constants. Also, the future defun_lex
tool doesn't deal well with preprocessor expansions in the same regard.
This tries simplifying out some of these. lib/distribute.c needs
further thinking.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fix a few memory issues:
* Not freeing tab-completions upon input match failure
* Invalid write when null-terminating tab-completions
* Not freeing argv[] itself in additinon to elements
* Use XFREE() instead of free() as appropriate
* Not freeing final token of an [option] during parsing
Make a few minor changes to CLI internals:
* Improve documentation on matching & completion functions
* Only make one copy of cmd_token's when building argv,
instead of three
* Don't make a copy of the matching cmd_element
Make one major(ish) change to CLI internals:
* Change all pointers to struct cmd_element to const
Code outside of the core CLI units should never have an
occasion to modify the internal state of the command system.
Doing so could easily amount to having a CLI interface that
changes during runtime, and could conceivably lead to security
issues. Explicitly disallowing this removes any chance of
confusion.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Each token now knows whether it is part of a hidden
or deprecated command. Command completion logic hides
such tokens when generating completions. Command
matching logic works as before and will still match on
hidden and deprecated commands.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This silences the following warning from watchquagga:
"Can't save to configuration file, using vtysh."
which otherwise appears when doing a "write file" in vtysh when no
integrated-config is in use.
Also make "show memory" available in watchquagga.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This new command - available for internal use by vtysh and explicit
usage by users - calls "vtysh -w" from watchquagga. This ensures vtysh
is run with privileges to actually write the integrated-config file.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- Do not allow tab-completion on anything except words
- Rewrite cmd_make_strvec to use strsep
- Remove a few trailing whitespaces
- Remove cmd_complete_command_lib
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* command.h: (struct cmd_node) Add a hash, so duplicate installs of
a cmd_element to a command node can be detected. To help catch
strays from the VIEW/ENABLE node consolidation particularly
(installs to VIEW automatically install to ENABLE too now).
* command.c: (cmd_hash_{key,cmp}) helpers for the hash - just directly
on the pointer value is sufficient to catch the main problem.
(install_node) setup the hash for the command node.
(install_element) check for duplicate installs.
The assert on the cmd_parse_format seems misplaced.
(install_default_basic) separate the basic, VIEW, node default commands
to here.
(cmd_init) get rid of dupes, given consolidation.
(cmd_terminate) clean up the node command hash.
Not done: The (struct cmd_node)'s vector could be replaced with the
cmd hash, however much of the command parser depends heavily on the
vector and it's a lot of work to change. A vector_lookup_value could
also work, particularly if vector could be backed by a hash.
The duplicate check could be disabled in releases - but useful in
development. It's a little extra overhead at startup. The command
initialisation overhead is already something that bites in
micro-benchmarks - makes it easy for other implementations to show
how much faster they are with benchmarks where other load is low
enough that startup time is a factor.
The RESTRICTED_NODE command is not used, introduces code
complexity and provides no additional levels of security.
The only way to get into RESTRICTED_NODE is to add, under
vty configuration the command 'anonymous restricted', and
then telnet to a daemon, provide a password, then type
'enable' and fail to enter the password three times.
Then the user can enter a very limited set of commands to
monitor bgp and only bgp behavior.
This commit removes both the RESTRICTED_NODE usage as well
as the lib/* usage of the code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
Add support for statically configuring MPLS transit LSPs. This allows the
configuration of ILM to one or more NHLFE, as defined in RFC 3031. The
currently supported nexthop types are IPv4 or IPv6.
The two label operations supported are swap and PHP; the latter is configured
by specifying the out-label as "implicit-null". Note that the operation is
against the label, so it should be the same for all NHLFEs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804, ...
Reviewed By: CCR-3085
Testing Done: In combination with other patches
Shotgun commit:
* Remove shim sources from Makefile.am
* Move new types to command.c / command.h
* Rewrite command.c / command.h
* Refactor shim types to real types in matcher
and parser
* Initial refactor pass on vty.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
We realize VRFs with linux netns by default. The main job is
to associate a VRF with a netns. Currently this is done by
the configuration:
[no] vrf N netns <netns-name>
This command is also available in vtysh and goes to only
zebra, because presently only zebra supports multiple VRF.
A file descriptor is added to "struct vrf". This is for the
associated netns file. Once the command "vrf N netns NAME"
is executed, the specified file is opened and the file
descriptor is stored in the VRF N. In this way the
association is formed.
In vrf_socket(), we first switch to the specified VRF by
using the stored file descriptor, and then can allocate
a socket which is working in the associated netns.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
(cherry picked from commit 55cfa2f190620f7c711944637659bc208970324d)
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
Various memory leaks have been fixed and the quagga
memory macros are in use. Also consolidated the argv
and matching code into one graph traversal.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
In "lib/cli: reduce strcmp in CLI hot paths", I failed to notice that
CMD_VARIABLE as a boolean test covers a superset of the other types of
variables. Thus, the patch broke processing of IP/IPv6/Integer range
parameters in the CLI.
Fix by some reordering and introducing TERMINAL_RECORD macro (which
marks whether a given terminal type is a parameter) to be used in places
where the check is really for all kinds of variables.
Reported-by: Timo Teräs <timo.teras@iki.fi>
Tested-by: Martin Winter <mwinter@netdef.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Er, no idea how anyone could ever have thought that it would be a good
idea to have a zillion of strcmp() calls in the CLI's active paths, just
to compare against things like "A.B.C.D".
Reduces 40k prefix list load time from 1.65s to 1.23s (1.34:1).
Acked-by: Paul Jakma <paul@jakma.org>
[v2: killed CMDS_* macros]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 10bac80195cf5a781da6e4415e6580fd7080f734)
When libreadline is used, we mistakenly mix in strdup() done in
libreadline with Quagga's lib/memory bookkeeping/counting, leading to
counter underflows on MTYPE_TMP.
Signed-off-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 672900382d47137638086bd8351b2678f589a546)
Conflicts:
lib/command.c
Welcome pimd to the Quagga daemon zoo!
This is a merge of commit 77ae369 ("pimd: Log ifindex found for an
interface when zebra lib reports a new connected address."), with
the intermediate "reconnect" changes removed (c9adf00...d274381).
d274381 is replaced with b162ab7, which includes some changes. In
addition, 4 reconnect-related changes and 1 cosmetic one have been
bumped out.
The rebase command used to produce the branch that is merged here is:
git rebase --onto b162ab7 c9adf00 77ae369
Note that 3 patches had their author rewritten from
"Anonymous SR#108542 <>" (which is not a valid git author ID)
to: "Savannah SR#108542 <nbahr@atcorp.com>" (which is the e-mail address
listed in the associated Savannah ticket)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When doing a 'show run' display vrf information
first to allow later commands to just
work correctly for vrf cli read in.
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10002
superm-redxp-05# conf t
superm-redxp-05(config)# route-map FOO permit 10
superm-redxp-05(config-route-map)# set community ?
AA:NN Community number in AA:NN format (where AA and NN are <0-65535>) or local-AS|no-advertise|no-export|internet or additive
none No community attribute
superm-redxp-05(config-route-map)# set community 2:2
superm-redxp-05(config-route-map)# set community 2:70000
% Malformed communities attribute
superm-redxp-05(config-route-map)# set community 70000:2
% Malformed communities attribute
superm-redxp-05(config-route-map)#
When we encounter a problem loading a config file
quantify to the end user what has gone wrong,
with a combination of err output as well as
return codes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dave Olson <olson@cumulusnetworks.com>
Code was already in place to read and display a motd, but
no cli was present to make it happen. Add the cli
back to vtysh.conf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
