The previous method, using zassert.h and hoping nothing includes
assert.h (which, on glibc at least, just does "#undef assert" and puts
its own definition in...) was fragile - and actually broke undetected.
Just provide our own assert.h and control overriding by putting it in a
separate directory to add to the include path (or not.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this api is needed for nhrp. the goal is to implement it in zebra, while
other daemon will used it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch implements new zapi api to get neighbor information that zebra knows
and that other daemons may need to know. Actually, nhrp daemons is
interested in getting the neighbor information on gre interfaces, and
the API will be used for that.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN nexthops are installed as remote neighs by zebra. This was earlier
done only via VRF IPvX uni routes imported from EVPN routes.
With EVPN-MH these VRF routes now reference a L3NHG which is setup based
on the EAD and doesn't include the RMAC. To workaround that BGP now
consolidates and maintains EVPN nexthops which are then sent to zebra.
zebra sets up these nexthops as L3-VNI nh entries using a dummy type-1
route as reference.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
Add the proto Nexthop Group Notify Owner header to
the log command types for string conversion.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add logging info for the new zapi ZEBRA_NHG_ADD[DEL]
message types. With this patch, they are logged properly
when debugs are turned on.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a zapi message type designed to carry opaque data. Add
'send' api, and prototype for client handler function. Also
add registration/unreg messages, so that clients can 'subscribe'
to receive these messages as they're passing through zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
The old version was creating a multi-line log message, which we can't
properly handle right now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This string is used in some logging for e.g. in zclient_read -
>>>>>>>>>>>>>>>>>>>>>>>>>>
if (zclient_debug)
zlog_debug("zclient 0x%p command %s VRF %u",
(void *)zclient, zserv_command_string(command),
vrf_id);
>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
For Graceful restart clients have to send GR capabilities
library functions are added to encode capabilities and
also for zebra to decode client capabilities.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Coverity report caught this log mutex being unlocked twice.
Removing the extra one before the goto statement.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
zvni setup in zebra is controlled via bgpd i.e. advertise_all_vni
from bgpd triggers this setup. As a part of zvni creation we may need
to setup BUM mcast SG entries which are propagated to pimd for MDT setup.
Now pimd may not be present at the time of zvni creation or may restart
post zvni creation so we need a mechanism to replay (on pimd startup) and
to cleanup (on pimd stop). This is addressed via zebra_vxlan_sg_replay and
zebra_evpn_pim_cfg_clean_up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
As logging functions are called, if filters are stored,
look for the filter substring in the logs. If it is not
found, do not output the log to a file or stdout.
If the filter is matched, handle the log call per usual.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Simplify the code in deleting a filter by using memmove rather
than iterating. Memmove handles overlapping strings safely so
this is fine here.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code for manipulation/creation of log filters
and their table. Specifically, add lookup,clear,add,del,dump
functionality.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This makes printfrr extensions available in most of our format strings.
snprintf() is the obvious exception.
Signed-off-by: David Lamparter <equinox@diac24.net>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a few missing log entries to the macro to allow us to print
out the zapi message type, since they were missing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This change is used to send configue changes for
advertise svi address as macip (type-2) route.
Ticket:CM-23782
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
