Added a new cli command "ip pim passive" in the interface context,
to disable sending of pim control packets on the interface.
Signed-off-by: sarita patra <saritap@vmware.com>
There's a common pattern of "get VRF context for CLI node" here, which
first got a helper macro in zebra that then permeated into pimd.
Unfortunately the pimd copy wasn't quite adjusted correctly and thus
caused two coverity warnings (CID 1517453, CID 1517454).
Fix the PIM one, and clean up by providing a common base macro in
`lib/vty.h`.
Also rename the macros (add `_VRF`) to make more clear what they do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the "mld_group_watermark_cmd" to "ipv6_mld_group_watermark_cmd"
and "igmp_group_watermark_cmd" to "ip_igmp_group_watermark_cmd" for consistency.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
frr(config-if)# ip igmp join 232.1.1.1 10.10.10.10
frr(config-if)# do sh ip igmp sources
Interface Address Group Source Timer Fwd Uptime
ens192 232.1.1.1 10.10.10.10 04:10 N 00:00:10
frr(config-if)#
The above output is misaligned and is having Address field which is not
required here.
Fixing it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new show CLI to display regarding pim neighbors.
Changing DEFUN to DEFPY for "show ip pim neighbor" command.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the new cli to display pim local membership information.
Changing DEFUN to DEPFY for "show ip pim local-membership"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim join and show ipv6 pim vrf all join
CLIs to display pim join related information and
formatted the json output for "show ip pim join" and
"show ip pim vrf all join" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim interface and show ipv6 pim vrf all interface
CLIs to display pim enabled interface informations and
formatted the json output for "show ip pim interface" and
"show ip pim vrf all interface" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new CLI to display pim channel informations.
Changing DEFUN to DEPFY for ""show ip pim channel"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
show ip mroute json command displays the source, group info
per oil, so for pruned group since the OIL is empty, it is not
showing.
Fix: Added the above information per source.
Signed-off-by: sarita patra <saritap@vmware.com>
