When reading in a nexthop from ZAPI, only set the fields that actually
have meaning. While it shouldn't happen to begin with, we can otherwise
carry padding garbage into the unused leftover union bytes.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 4a0e1419a6)
In the near future, some daemons may only register SIDs. This may be
the case for the pathd daemon when creating SRv6 binding SIDs.
When a locator is getting deleted at ZEBRA level, the daemon may have
an easy way to find out the SIds to unregister to.
This commit proposes to add the locator name to the SID_SRV6_NOTIFY
message whenever possible. Only case when an allocation failure happens,
the locator will not be present. In all other places, the notify API
at procol levels has the locator name extra-parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add a new ZAPI command `ZEBRA_SRV6_SID_NOTIFY` used by zebra to send
asynchronous SRv6 SIDs notifications to zclients.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add two new ZAPI operations: `ZEBRA_SRV6_MANAGER_GET_SRV6_SID` and
`ZEBRA_SRV6_MANAGER_RELEASE_SRV6_SID`. These APIs allow a daemon to get and
release an SRv6 SID, respectively.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add a new ZAPI operation, ZEBRA_SRV6_MANAGER_GET_LOCATOR, which allows a
daemon to request information about a specific locator from the SRv6 SID
Manager.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When switching from nexthop to zapi_nexthop, the srte color
is copied. Do the same in reverse.
Fixes: 31f937fb43 ("lib, zebra: Add SR-TE policy infrastructure to zebra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Right where the zapi route flags are defined, there's a comment
asking that the flag-dumper-function also be updated.
Also apply clang-format's preferences, so next person won't have
to.
Signed-off-by: Mark Stapp <mjs@cisco.com>
When usid is not used, the isis_srv6_topo1 test does not work.
The SID prefix allocated by isis is different when the usid
flags is set or not. When the flags is not transmitted to isis,
the SID allocated is supposed to be a 128 bit mask length SID,
which is not what the isis_srv6_topo1 test is supposed to obtain.
Fix this by exchanging the flags locator value in the zclient api.
Fixes: 9b7491e1fc ("lib: Add support for flags to the SRv6 locator")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
BGP is now keeping a list of dests with the dest having a pointer
to the bgp_path_info that it will be working on.
1) When bgp receives a prefix, process it, add the bgp_dest of the
prefix into the new Fifo list if not present, update the flags (Ex:
earlier if the prefix was advertised and now it is a withdrawn),
increment the ref_count and DO NOT advertise the install/withdraw
to zebra yet.
2) Schedule an event to wake up to invoke the new function which will
walk the list one by one and installs/withdraws the routes into zebra.
a) if BUFFER_EMPTY, process the next item on the list
b) if BUFFER_PENDING, bail out and the callback in
zclient_flush_data() will invoke the same function when BUFFER_EMPTY
Changes
- rename old bgp_zebra_announce to bgp_zebra_announce_actual
- rename old bgp_zebra_withdrw to bgp_zebra_withdraw_actual
- Handle new fifo list cleanup in bgp_exit()
- New funcs: bgp_handle_route_announcements_to_zebra() and
bgp_zebra_route_install()
- Define a callback function to invoke
bgp_handle_route_announcements_to_zebra() when BUFFER_EMPTY in
zclient_flush_data()
The current change deals with bgp installing routes via
bgp_process_main_one()
Ticket: #3390099
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
zebra_interface_vrf_update_read is orphan. Remove it.
Fixes: b580c52698 ("*: remove ZEBRA_INTERFACE_VRF_UPDATE")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Avoids calling VRF/interface/... handlers in library code more than
once. It's kinda surprising that this hasn't been blowing up already
for the VNC code, luckily these handlers are (mostly?) idempotent.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... and use it instead of fiddling with the `.synchronous` field.
(Make it const while at it.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
INTERFACE_NAMSIZ is just a redefine of IFNAMSIZ and IFNAMSIZ
is the standard for interface name length on all platforms
that FRR currently compiles on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
zapi_nexthop_update_decode() is no longer called externally.
Also move the comment to zclient->nexthop_update where it now belongs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
All users of `ZEBRA_NEXTHOP_UPDATE` check the VRF and then call into
`zapi_nexthop_update_decode` before further processing. Begin moving
this into common code in lib/.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Add the txqlen attribute to the common interface struct. Capture
the value in zebra, and distribute it through the interface lib
module's zapi messaging.
Signed-off-by: Mark Stapp <mjs@labn.net>
Before now, PBRD used non-zero values to imply that a rule's
match or action field was active. This approach was getting
cumbersome for fields where 0 is a valid active value and
various field-specific magic values had to be used.
This commit changes PBRD to use a flag bit per field to
indicate that the field is active.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
In the netlink-mediated kernel dataplane, each rule is stored
in either an IPv4-specific database or an IPv6-specific database.
PBRD opportunistically gleans each rule's address family value
from its source or destination IP address match value (if either
exists), or from its nexthop or nexthop-group (if it exists).
The 'family' value is particularly needed for netlink during
incremental rule deletion when none of the above fields remain set.
Before now, this address family has been encoded by occult means
in the (possibly otherwise unset) source/destination IP match
fields in ZAPI and zebra.
This commit documents the reasons for maintaining the 'family'
field in the PBRD rule structure, adds a 'family' field in the
common lib/pbr.h rule structure, and carries it explicitly in ZAPI.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
After Zebra knows it's capability surrounding v6 with v4 nexthops
have it send this ability up to interested parties.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgpd, pbrd: use common pbr encoder
zebra: use common pbr decoder
tests: pbr_topo1: check more filter fields
Purpose:
1. Reduce likelihood of zapi format mismatches when adding
PBR fields due to multiple parallel encoder implementations
2. Encourage common PBR structure usage among various daemons
3. Reduce coding errors via explicit per-field enable flags
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a new notification zapi message type. A zapi client
that uses opaque messages can register to be notified
when a server for an opaque type is present.
Signed-off-by: Mark Stapp <mjs@labn.net>
Include the sending zapi client info (proto, instance, and
session id) in each opaque zapi message. Add opaque 'init'
apis for clients who want to encode their opaque data inline,
into the zclient's internal stream buffer. Use these init apis
in the TE/link-state lib code, instead of hand-coding the
zapi opaque header info.
Signed-off-by: Mark Stapp <mjs@labn.net>
An L3VPN network can be configured on the main BGP instance,
with an SRv6 SID. By declaring a network, a seg6local route
is created but remains invalid.
The below BGP VPN configuration the default VRF has been
used:
> router bgp 1
> address-family ipv6 unicast
> sid vpn export auto
> rd vpn export 1:30
> rt vpn both 77:77
> import vpn
> export vpn
> network 2001:7::/64
> exit-address-family
The below seg6local route has been added:
> # show ipv6 route
> [..]
> B 2001:db8:2:2:300::/128 [20/0] is directly connected, unknown inactive, seg6local End.DT6 table 254, seg6 ::, weight 1, 00:00:07
>
When creating the seg6local route, an interface is used as nexthop.
The interface index is obtained from the vrf identifier. This is
true when using VRF interfaces, but is wrong when using the lo
interface which usually has the '1' ifindex whereas the vrf id for
the default VRF is 0.
Get the appropriate index from the vrf identifier.
The below seg6local route is visible:
> # show ipv6 route
> [..]
> B>* 2001:db8:1:1:300::/128 [20/0] is directly connected, lo, seg6local End.DT6 table 254, seg6 ::, weight 1, 00:00:15
>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The safi has no 0 value which it is set to as part of the
initialization. Let's just set it to a sensible value.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
