XPATH_MAXLEN denotes the maximum length of an XPATH. It does not make
sense to allocate a buffer intended to contain an XPATH with a size
larger than the maximum allowable size of an XPATH. Consequently this PR
removes buffers that do this. Prints into these buffers are now checked
for overflow.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Renamed frr-igmp.yang to frr-gmp.yang, igmp to gmp container.
to support IGMP and MLD protocol.
frr-gmp.yang, created a list of address family under mgmd
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
frr-pim.yang, created a list of address family under pim
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
Mostly just 2 sed calls:
- `sed -e 's%struct prefix_sg%pim_sgaddr%g'`
- `sed -e 's%memset(&sg, 0, sizeof(pim_sgaddr));%memset(\&sg, 0, sizeof(sg));%g'`
Plus a bunch of fixing whatever that broke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_sock to struct gm_sock, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_group to struct gm_group, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_source to struct gm_source, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Fix:
====
Modifying name of struct igmp_join to struct gm_join, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Abhishek N R abnr@vmware.com
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
... where it actually belongs. And make a bunch of stuff static, since
it's no longer used across files now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The Bootstrap message RX path needs a RPF check for the BSR address,
and this is implemented both incorrectly as well as quite ugly.
Clean up and fix case when we have multiple interfaces to the same LAN
and/or ECMP nexthops (both would cause message duplication, the former
can even cause BSM forwarding loops.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
enum based switches should never use default. It makes
it very hard to fix and find issues when the enum is
changed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Deleting a mesh-group member no longer deletes the mesh-group.
Complete bug description at:
https://github.com/FRRouting/frr/issues/9664
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
This `XFREE()` call is in plainly in the wrong spot. `rp_all` (the
224.0.0.0/4 entry) isn't supposed to be free'd ever, and the
conditional above makes quite clear that it remains in use.
It may be possible to exploit this as a heap corruption bug, maybe even
as RCE. I haven't tried; I randomly noticed this while working on the
BSM code. Luckily this code is only run by the CLI for the clear
command, so the surface is very small.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Intentionally separate here because the previous patch does a whole
bunch of "move stuff up 1 level of indentation", and reviewing that is
easier when you can use the ignore-whitespace option on diff.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Some no commands were not accepting values and left us in
a situation where a cut-n-paste of the non-no line would
not be properly accepted.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Allow the join-prune interval to be as small as 5 seconds instead
of limiting the value to 60.
This can and will come at a price of being able to converge less
mroutes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
1. Add the querierIP object to igmp_sock datastruct to save the IP address of the querier.
Management of the querierIP object is added.
2. To show the querier IP address in the CLI "show ip igmp interface".
3. To add the json object querierIP for querier IP address in the json CLI "show ip igmp interface json".
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Fully utilize the northbound to hold pointers to our private data
instead of searching for data structures every time we need to change a
configuration.
Highlights:
* Support multiple mesh groups per PIM instance (instead of one)
* Use DEFPY instead of DEFUN to reduce code complexity
* Use northbound private pointers to store data structures
* Reduce callback names size
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem reported that when certain pim commands were entered, they
showed up duplicated in the configuration both under default instance
and every vrf (whether pim was used there or not.) This was because
these particular parameters are global only and the function doing
the display would repeat for each vrf. This fix only displays those
in the default case (and removes them from the help for entering
under a vrf.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Just some cleanup before I touch this code; switching to typesafe list
macros & putting the data directly inline.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
