Moving the common lines of pim_local_membership cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_jp_agg cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_channel cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 zebra command for debugging about
the events from zebra that come up through the ZAPI.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 packetdump send and recv coomands for debugging
of pimv6 packet sent and received which are dumped.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing pimv6 packets debug to information about packet generation for sending
and about packet handling from a received packet.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 nht command for PIMv6 nexthop tracking.
It will display information about RPF lookups and information about when a nexthop changes.
debug pimv6 nht detial for for PIMv6 nexthop in detail.This is not enabled by default.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Added a new cli command "ip pim passive" in the interface context,
to disable sending of pim control packets on the interface.
Signed-off-by: sarita patra <saritap@vmware.com>
There's a common pattern of "get VRF context for CLI node" here, which
first got a helper macro in zebra that then permeated into pimd.
Unfortunately the pimd copy wasn't quite adjusted correctly and thus
caused two coverity warnings (CID 1517453, CID 1517454).
Fix the PIM one, and clean up by providing a common base macro in
`lib/vty.h`.
Also rename the macros (add `_VRF`) to make more clear what they do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the "mld_group_watermark_cmd" to "ipv6_mld_group_watermark_cmd"
and "igmp_group_watermark_cmd" to "ip_igmp_group_watermark_cmd" for consistency.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
frr(config-if)# ip igmp join 232.1.1.1 10.10.10.10
frr(config-if)# do sh ip igmp sources
Interface Address Group Source Timer Fwd Uptime
ens192 232.1.1.1 10.10.10.10 04:10 N 00:00:10
frr(config-if)#
The above output is misaligned and is having Address field which is not
required here.
Fixing it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new show CLI to display regarding pim neighbors.
Changing DEFUN to DEFPY for "show ip pim neighbor" command.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the new cli to display pim local membership information.
Changing DEFUN to DEPFY for "show ip pim local-membership"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim join and show ipv6 pim vrf all join
CLIs to display pim join related information and
formatted the json output for "show ip pim join" and
"show ip pim vrf all join" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim interface and show ipv6 pim vrf all interface
CLIs to display pim enabled interface informations and
formatted the json output for "show ip pim interface" and
"show ip pim vrf all interface" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new CLI to display pim channel informations.
Changing DEFUN to DEPFY for ""show ip pim channel"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
show ip mroute json command displays the source, group info
per oil, so for pruned group since the OIL is empty, it is not
showing.
Fix: Added the above information per source.
Signed-off-by: sarita patra <saritap@vmware.com>
Now we return all zeroed stats, which seems wrong. Handle the same way, as
with PIM interfaces. Return empty JSON and a warning for VTYSH.
```
exit1-debian-11# sh ip igmp statistics interface belekas
% No such interface
exit1-debian-11# sh ip igmp statistics interface belekas json
{
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This isn't a system or interface setting, it's a socket behavior. It is
both irrelevant and confusing to the user since it doesn't affect any
system behavior (but it sounds like it does). Whether it is enabled or
not is solely relevant to how the code is designed to work.
So, remove it from output.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
1. Moving the processing of the above command to an api.
2. Change DEFUN to DEPFY
3. Make the api common for pimv4 and pimv6 processing.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Changes correct typo in JSON output for IGMP interface statistics show
command from "leaveV3" to "leaveV2".
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
