The adj_process_threeway() api may call the adj_state_change()
api, which may delete the adj struct being examined. Change the
signature so that callers pass a ptr-to-ptr so that they will
see that deletion.
Signed-off-by: Mark Stapp <mjs@cisco.com>
1. The lsp_update_data() function will check for the presence of the ISIS_TLV_DYNAMIC_HOSTNAME in the LSP, and then call isis_dynhn_insert() to add a hostname entry corresponding to the LSP ID. However, when the ISIS_TLV_DYNAMIC_HOSTNAME is not present in the LSP, the hostname entry corresponding to the LSP ID should also be deleted.
2. The command “show isis neighbor” invokes isis_adj_name() to display the System ID or hostname, but it does not check the area->dynhostname flag.
3. When the LSP expires and is removed, the corresponding hostname entry should also be deleted.
4. The TLV for LSP fragmentation will not contain the hostname and should be skipped.
Signed-off-by: zhou-run <zhou.run@h3c.com>
When receiving a hello packet, if the neighbor state transitions directly from a non-ISIS_ADJ_UP state (such as ISIS_ADJ_INITIALIZING) to ISIS_ADJ_DOWN state, the neighbor entry cannot be deleted. If the neighbor is removed or the neighbor's System ID changes, it may result in memory leakage in the neighbor entry.
Test Scenario:
LAN link between Router A and Router B is established. Router A does not configure neighbor authentication, while Router B is configured with neighbor authentication. When the neighbor entry on Router B ages out, the neighbor state on Router A transitions to INIT. If Router B is then removed, the neighbor state on Router A transitions to DOWN and persists.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
fix frrbot styling issues found.
fix frrbot styling issues found.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Before:
```
anlan# show isis neighbor
Area xx:
System Id Interface L State Holdtime SNPA
0023.0000.0000 enp1s0 2 Down Expiring2c53.4a30.0820
```
After:
```
anlan# show isis neighbor
Area xx:
System Id Interface L State Holdtime SNPA
0023.0000.0000 enp1s0 2 Down Expiring 2c53.4a30.0820
```
The `-` display format caused by no hello packet in `isis_adj_print_vty()`
is same as that of above "Expiring".
Signed-off-by: anlan_cs <anlan_cs@tom.com>
The ISIS_SR_LAN_BACKUP should be renamed to ISIS_SR_ADJ_BACKUP.
Fixes: 26f6acafc3 ("isisd: add support for segment routing")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This path replaces isisd_format_id, sysid_print, snpa_print, rawlspid_print and
isonet_print functions by the new printfrr ISO System ID & Network Address
format facilities. It also updates the isisd code to the new iso_address
structure defined in lib/iso.h
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When an IS-IS interface is coming down, fast-reroute may be triggered
twice: a first time after the detection of the interface down event and
a second time after the detection of the adjacency down (because of the
expiration of the ISIS Hello or BFD timers).
Avoid a BFD down event from running fast-reroute another time if the
interface was already detected down.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When an IS-IS interface is coming down, fast-reroute may be triggered
twice: a first time after the detection of the interface down event and
a second time after the detection of the adjacency down (because of the
expiration of the ISIS Hello or BFD timers).
Avoid a BFD down event from running fast-reroute another time if the
interface was already detected down.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Pointers to the adjacency must be cleared only when the adjacency is
deleted. Otherwise, when the ISIS router is deleted later, the adjacency
is not deleted and a crash happens because of UAF.
Fixes#10209.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
These variables are only assigned with time() which returns time_t.
This should also fix occasional CI build failures because of comparisons
of signed and unsigned integers.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, the dynamic hostname cache is global. It is incorrect because
neighbors in different VRFs may have the same system ID and different
hostnames.
This also fixes a memory leak - when the instance is deleted, the cache
must be cleaned up and the cleanup thread must be cancelled.
Fixes#8832.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Convert most DEFINE_MTYPE into the _STATIC variant, and move the
remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
A wrong check was silently skipping the initialization of the bfd_session
struct in the adjacency if the router was not configured for IPv6. This
would cause BFD events to be ignored regardless of the configuration.
Also add a function to return the "name" of an adjacency and use it in a
couple of places, including the new log, instead of repeating the same
code in a bunch of places.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
An adjacency should be removed when the holdtimer expires, but if the
system is overloaded we may end up doing it late. In the meanwhile vtysh
will display an incorrect value in the show isis neighbor output, due to
an overflow of the unsigned variable used to display the Holdtime, e.g.:
pe1# show isis neighbor
Area test:
System Id Interface L state Holdtime SNPA
Spirent-1 2.201 1 Down 26 2020.2020.2020
Spirent-1 2.203 1 Up 21 2020.2020.2020
Spirent-1 2.204 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.207 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.208 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.209 1 Up 0 2020.2020.2020
Spirent-1 2.210 1 Up 18446744073709551615 2020.2020.2020
pe2 12.200 1 Up 30 2020.2020.2020
Guard against that by printing an "Expiring" message instead.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
There is no need to call isis_adj_state_change_hook once per level
in isis_adj_state_change, we can just do it once at the end.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
This is mostly a cosmetic change to make the code more modular,
more elegant and easier to understand.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
This should simplify all code that needs to iterate over all
adjacencies of a given area (iterating over all adjacencies of all
circuits is cumbersome).
While here, repurpose isis_adj_exists() into a lookup function,
making it more generally useful.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unfortunately as the topotests show a fast recovery after failure
detection due to BFD is currently not possible because of the following
issue:
There are multiple scheduling mechanisms within isisd to prevent
overload situations. Regarding our problem these two are important:
* scheduler for regenerating ISIS Link State PDUs scheduler for managing
* consecutive SPF calculations
In fact both schedulers are coupled, the first one triggers the second
one, which again is triggered by isis_adj_state_change (which again is
triggered by a BFD 'down' message). The re-calculation of SPF paths
finally triggers updates in zebra for the RIB.
Both schedulers work as a throttle, e.g. they allow the regeneration of
Link State PDUs or a re-calculation for SPF paths only once within a
certain time interval which is configurable (and by default different!).
This means that a request can go through the first scheduler but might
still be 'stuck' at the second one for a while. Or a request can be
'stuck' at the first scheduler even though the second one is ready. This
also explains the 'random' behaviour one can observe testing since a
'fast' recovery is only possible if both schedulers are ready to process
this request.
Note that the solution in this commit is 'thread safe' in the sense that
both schedulers use the same thread master such that the introduced
flags are only used exactly one time (and one after another) for a
'fast' execution.
Further there are some irritating comments and logs which I partially
removed. They seems to be not valid anymore due to changes in thread
management (or they were never valid in the first place).
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
if we shutdown an interface isisd will delete the adjacencies
on the corresponding circuit, but it will not log the change.
Fix it to make sure that each change is logged. Also specify
the level of the adjacency in the log message, while we are at it.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
