A router-id MUST NOT consist of either all binary zeroes (0000000000000000 hexadecimal) or all binary ones (FFFFFFFFFFFFFFFF hexadecimal).
Signed-off-by: zmw12306 <zmw12306@gmail.com>
When deactivating babel no router babel and later re-enabling
it router babel the previous configuration is still in place.
Steps to reproduce:
- Enable babel
- Configure babel
- Disable babel with "no router babel"
- Verify config
Expected correct behavior: No config present
Signed-off-by: Yaroslav Kholod <y.kholod@vyos.io>
Currently, we always use access-list autocompletion, even if configuring
prefix-lists. We should differentiate.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
INTERFACE_NAMSIZ is just a redefine of IFNAMSIZ and IFNAMSIZ
is the standard for interface name length on all platforms
that FRR currently compiles on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have 2 competing versions of likely and unlikely
in babeld and nhrpd. Standardize onto lower case
versions and consolidate in the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Some babeld commands doesn't have the corresponding negative commands
defined, so those commands doesn't work with frr-reload.py.
This PR adds those missing commands.
Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
Don't rely on the OS interface name length definition and use the FRR
definition instead.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The `distribute-list` commands were registered but never setup
properly to work. Put the commands in place.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
The babel_main_loop function did not have a return for
a non-void function. For some reason gcc is starting to complain
about this now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
