There is no reason to call `igmp_anysource_forward_stop()` inside a call to
`igmp_get_source_by_addr()`; not only it is not expected for a "get" function
to perform such an action, but also the decision to start/stop forwarding is
already handled correctly by pim outside `igmp_get_source_by_addr()`.
That call was left there from the days pim was initially imported into the sources.
The problem/crash was happening because `igmp_find_source_by_addr()` would fail to
find the group/source combo when mixing `(*, G)` and `(S, G)`. When having an existing
flow `(*, G)`, and a new `(S, G)` igmp is received, a new entry is correctly created.
`igmp_anysource_forward_stop(group)` always stops and eventually frees `(*, G)`, even
when the new igmp is `(S, G)`, leaving a bad state. I.e, the new entry for `(S, G)`
causes `(*, G)` to be deleted.
Tested the fix with multiple receivers on the same interface with several ssm and
any source senders and receivers with various combination of start/stop orders and
they all worked correctly.
Fixes: #15630
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Receiver---LHR---RP
Problem:
In LHR, ipv6 pim state remains after MLD prune received.
Root Cause:
When LHR receives join, it creates (*,G) channel oil with
oil_ref_count = 2. The channel_oil is used by gm_sg sg->oil
and upstream->channel_oil.
When LHR receives prune, currently upstream->channel_oil is
deleted and gm_sg sg->oil still present. Due to this channel_oil
is still present with oil_ref_count = 1
Fix:
When LHR receives prune, upstream->channel_oil and pim_sg sg->oil
needs to be deleted.
Issue: #11249
Signed-off-by: Sarita Patra <saritap@vmware.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Changed PIM_DEBUG_IGMP_TRACE to PIM_DEBUG_GM_TRACE and
PIM_DEBUG_IGMP_TRACE_DETAIL to PIM_DEBUG_GM_TRACE_DETAIL.
Hence, these macros can be used for both v6 and v4.
Issue: #11895
Co-authored-by: Sai Gomathi N <nsaigomathi@vmware.com>
Signed-off-by: Abhishek N R <abnr@vmware.com>
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
pimd is receiving v3 igmp packets on an interface that is setup as v2 and
causing the igmp group as configured on that interface to get a bit
wonky.
Add a check to receiving v3 packets and to drop the packet if the
igmp version configed on the interface is 2.
Fixes: #11105
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
5421bf8 commit forgot to set the parameter "new" to true
when a new source is created, have fixed it.
igmp_get_source_by_addr api is currently setting the parameter
"new" to false always. This is not right. The caller apis are using
this field to decide and based on that take actions to create timers, etc.
Its need to be set to true when a new source is created.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Problem Statement:
==================
(rcv1)-----A----B---C
v3 enabled with src 90.0.0.1
|
(rcv2)--
v3 enable with src none
rcv1 sends the packet in INCLUDE mode, rcv2 sends the IGMP report
in exclude mode. As per the state machine the group structure was
getting added and deleted. As group gets deleted the mroute for 90.0.0.1
and recreated back.
This effects the end to end trafiic.
Root Cause Analysis:
====================
As per state machine
INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Group Timer=GMI
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer
Delete (X-A)
Delete (Y-A)
Send Q(G,A-Y)
Group Timer=GMI
The above equations were getiing calulated for IP address
90.0.0.1 and 0.0.0.0
This results in group creation deletion.
Fix:
====
As per RFC 4604.
drop the exclude mode, IGMP reports, if destnation group is
SSM based.
EXCLUDE
mode does not apply to SSM addresses, and an SSM-aware router will
ignore MODE_IS_EXCLUDE and CHANGE_TO_EXCLUDE_MODE requests in the SSM
range.
Signed-off-by: Abhishek N R <abnr@vmware.com>
Signed-off-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
These really don't serve much of a purpose, especially with how
inconsistently they're used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_sock to struct gm_sock, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_group to struct gm_group, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_source to struct gm_source, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
This makes a lot more sense semantically (and matches the way groups are
handled.) Also allows placing additional restrictions on source
creation (e.g. limit on number of sources or ACLs.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Intentionally separate here because the previous patch does a whole
bunch of "move stuff up 1 level of indentation", and reviewing that is
easier when you can use the ignore-whitespace option on diff.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem :
=======
When all the groups from Ixia are stopped,
groups still keep refreshing and not getting timeout
RCA:
====
IGMP Report is coming in include mode without any source address, this problem will come.
Fix :
===
If the requested filter mode is INCLUDE *and* the requested
source list is empty, then the entry corresponding to the
requested interface and multicast address is deleted if present.
If no such entry is present, the request is ignored.
When an interface receives the IGMP report without any source, then the group is deleted.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Issue: When an IGMPv2 leave packet is received, it did not validate
the checksum and hence the packet is accepted and group specific
query is sent out in response to this.
Due to this IGMP conformance test case 6.1 failed.
https://github.com/FRRouting/frr/issues/6868
Fix: Validate the checksum for all IGMP packets
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When receiving igmp packets we are spitting out a lot of
debugs. Attempt to clean this up to allow us to understand
what is going on a bit better by just being able to look
at the log file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
Create a `struct pim_router` and move the thread master into it.
Future commits will further move global varaibles into the pim_router
structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
