Currently, nb_operation enum means two different things - edit operation
type (frontend part), and callback type (backend part). These types
overlap, but they are not identical. We need to add more operation
types to support NETCONF/RESTCONF integration, so it's better to have
separate enums to identify different entities.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Fix frr-reload script to only render 'no description'
rather than 'no description blah'
Ticket:#3628756
Testing Done:
Before:
2023-11-29 02:38:55,758 INFO: Failed to execute interface hostbond_1
no description hostbond_1_to_host exit
2023-11-29 02:38:55,758 ERROR: "interface hostbond_1 -- no description
hostbond_1_to_host -- exit" we failed to remove this command
2023-11-29 02:38:55,758 ERROR: % Unknown command: no description
hostbond_1_to_host
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Replace `struct list *` with `DLIST(if_connected, ...)`.
NB: while converting this, I found multiple places using connected
prefixes assuming they were IPv4 without checking:
- vrrpd/vrrp.c: vrrp_socket()
- zebra/irdp_interface.c: irdp_get_prefix(), irdp_if_start(),
irdp_advert_off()
(these fixes are really hard to split off into separate commits as that
would require going back and reapplying the change but with the old list
handling)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- These are just normal reachable allocs from inside external library code;
however, when running valgrind with memleak types "all" in order to find FRR
specific leaks (from memory.h) these are the only other reported leaks. Makes
easier checking and fixing.
Signed-off-by: Christian Hopps <chopps@labn.net>
Also update `checkpatch.sh` so it runs `checkpatch.pl` from the same directory
it resides in. This allows copying them both somewhere else to use a specific
version.
Signed-off-by: Christian Hopps <chopps@labn.net>
- move from client id indexed array of uints for register info
per client to a u64 bitmask.
- add bit walking FOREACH macro
Walk the client IDs whose bits are set in a mask.
Signed-off-by: Christian Hopps <chopps@labn.net>
Fix frr-reload script to only render 'no description'
rather than 'no description blah'
Ticket:#3650752
Testing:
route-map TEST permit 140
description rule for PFIX_IPV6_7
match ipv6 address prefix-list PFIX_IPV6_7
exit
!
end
torc-11# confi t
torc-11(config)# route-map TEST permit 140
torc-11(config-route-map)# no description rule for PFIX_IPV6_7
% Unknown command: no description rule for PFIX_IPV6_7
torc-11(config-route-map)# no description rule
% There is no matched command.
torc-11(config-route-map)# no description
<cr>
torc-11(config-route-map)# no description
torc-11(config-route-map)#
Using frr-reload failure log:
2023-10-31 00:30:31,972 INFO: Failed to execute route-map TEST permit 140 no description rule for PFIX_IPV6_7 exit
2023-10-31 00:30:31,972 ERROR: "route-map TEST permit 140 -- no description rule for PFIX_IPV6_7 -- exit" we failed to remove this command
2023-10-31 00:30:31,972 ERROR: % Unknown command: no description rule for PFIX_IPV6_7
With fix:
2023-11-02 06:10:30,024 INFO: Executed "route-map TEST permit 140 no description exit"
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When calling daemon_stop() with --quiet and e.g. the pidfile is empty,
it won't return early since while "$fail" is set, "$2" is "--quiet", so
the if condition isn't met and it will continue executing, resulting
in error messages in the log:
> Sep 14 14:48:33 localhost watchfrr[2085]: [YFT0P-5Q5YX] Forked background command [pid 2086]: /usr/lib/frr/watchfrr.sh restart all
> Sep 14 14:48:33 localhost frrinit.sh[2075]: /usr/lib/frr/frrcommon.sh: line 216: kill: `': not a pid or valid job spec
> Sep 14 14:48:33 localhost frrinit.sh[2075]: /usr/lib/frr/frrcommon.sh: line 216: kill: `': not a pid or valid job spec
> Sep 14 14:48:33 localhost frrinit.sh[2075]: /usr/lib/frr/frrcommon.sh: line 216: kill: `': not a pid or valid job spec
Fix this by moving the --quiet check into the block to log_failure_msg(),
and also add the check to all other invocations of log_*_msg() to make
--quiet properly suppress output.
Fixes: 19a99d89f0 ("tools: suppress unuseful warnings during restarting frr")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
When deleting a key chain with frr-reload track if the whole root node
is being removed or not.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
OSPFv2 no area x stub no-summary only resets
'no-summary' config. From frr-reload if the config
line 'area x stub no-summary' is removed then
it needs to remove completely. Before this change
it took two frr-roload to remove the config which is
inconsistent behavior.
Fix is to frr-reload to add extra line to delete
'no area x stub'.
Ticket:#3514775
Testing Done:
Running config:
router ospf
ospf router-id 6.6.6.6
area 0.0.0.1 stub no-summary
area 0.0.0.2 stub
exit
!
router ospf vrf sym_1
area 0.0.1.1 range 24.1.1.0/24
area 0.0.1.2 stub no-summary
exit
changed frr.conf:
router ospf
ospf router-id 6.6.6.6
area 0.0.0.2 stub
exit
!
router ospf vrf sym_1
area 0.0.1.1 range 24.1.1.0/24
exit
Lines To Delete
===============
router ospf
no area 0.0.0.1 stub <<<< newly added
router ospf vrf sym_1
no area 0.0.1.2 stub <<<< newly added
router ospf
no area 0.0.0.1 stub no-summary
router ospf vrf sym_1
no area 0.0.1.2 stub no-summary
After fix new running-config post reload:
i
router ospf
ospf router-id 6.6.6.6
area 0.0.0.2 stub
exit
!
router ospf vrf sym_1
area 0.0.1.1 range 24.1.1.0/24
exit
Before fix running-config post 1st reload:
router ospf
ospf router-id 6.6.6.6
area 0.0.0.1 stub
area 0.0.0.2 stub
exit
!
router ospf vrf sym_1
area 0.0.1.1 range 24.1.1.0/24
area 0.0.1.2 stub
exit
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When reloading the following config:
```
router ospf6
area 0 range 2001:db8::/32 advertise
exit
!
interface eth0
ipv6 ospf6 area 0
exit
```
frr-reload.py doesn't execute "exit" commands. Because of that, it tries
to execute "interface eth0" inside the "router ospf6" context and fails.
To always execute all commands from the correct context, frr-reload.py
should properly exit from every entered node.
Fixes#10132.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When we pass an unknown/wrong command and do `systemctl reload frr`, all processes
are killed, and not started up.
Like doing with frr-reload.py, all good:
```
$ /usr/lib/frr/frr-reload.py --reload /etc/frr/frr.conf
vtysh failed to process new configuration: vtysh (mark file) exited with status 2:
b'line 20: % Unknown command: neighbor 192.168.10.123 bfd 300 300\n\n'
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When no ip pim is performed subsequent pim related
configs under the interface also implicitly deleted.
When doing this via frr-reload requires to remove any
explicit no ip pim <blah> lines so delete list.
Testing Done:
running-config:
interface lo
ip pim
ip pim use-source 6.0.0.1
exit
frr.conf:
remove two pim config lines.
interface lo
exit
Before fix:
2023-06-29 23:44:26,062 INFO: Failed to execute interface lo no ip pim use-source 6.0.0.1
2023-06-29 23:44:26,142 INFO: Failed to execute interface lo no ip pim use-source
2023-06-29 23:44:26,221 INFO: Executed "interface lo no ip pim"
After fix:
Only no ip pim executed and rest of the other lines removed from delete
list.
2023-06-30 01:07:32,618 INFO: Executed "interface lo no ip pim"
Signed-off-by: Chirag Shah <chirag@nvidia.com>
There might be a time element(s) from
temporary list are removed more than once
which leads to valueError in certain python3
version.
commit-id 1543f58b5 did not handle valueError
properly. This caused regression where
prefix-list config leads to delete followed
by add.
The new fix should just pass the exception as
value removal from list_to_add or list_to_del
is best effort.
This allows prefix-list config has no change
then removes the lines from lines_to_del and
lines_to_add properly.
Ticket:#3490252
Testing:
Configure prefix-list in frr.conf and perform
multiple frr-reload. After first reload operatoin
subsequent ones should not result in delete followed
by add of the prefix-list but rather no-op operation.
(Pdb) lines_to_add
[(('ip prefix-list FOO permit 10.2.1.0/24',), None)]
(Pdb) lines_to_del
[(('ip prefix-list FOO seq 5 permit 10.2.1.0/24',), None),
(('ip prefix-list FOO seq 10 permit 10.2.1.0/24',), None)]
(Pdb) lines_to_del_to_del
[(('ip prefix-list FOO seq 5 permit 10.2.1.0/24',), None),
(('ip prefix-list FOO seq 10 permit 10.2.1.0/24',), None)]
(Pdb) lines_to_add_to_del
[(('ip prefix-list FOO permit 10.2.1.0/24',), None),
(('ip prefix-list FOO permit 10.2.1.0/24',), None)]
(Pdb) c
> /usr/lib/frr/frr-reload.py(1562)ignore_delete_re_add_lines()
-> return (lines_to_add, lines_to_del)
(Pdb) lines_to_add
[]
(Pdb) lines_to_del
[]
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Also move .dir-locals.el to a sample file. This file should not be
in the repository as it affects the user's ability to modify it.
Signed-off-by: Christian Hopps <chopps@labn.net>
From commit `411d1a2`, `bgp_delete_nbr_remote_as_line()` is added to
remove some specific bgp neighbors. But, when reloading the following
configuration, it will wrongly remove some good ones:
`neighbor 66.66.66.6 remote-as internal`:
```
router bgp 66
bgp router-id 172.16.204.6
neighbor ANLAN peer-group
neighbor ANLAN remote-as internal
neighbor 66.66.66.6 remote-as internal <- LOST
neighbor 66.66.66.60 peer-group ANLAN
```
The reason is that "66.66.66.6" is included in "66.66.66.60" literally,
then it is mistakenly thought to be a match. Just fix it with
excat match.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Before it was setting SDIR, which is /usr/lib/frr, but the vtysh binary is put
under bindir (which is /usr/local by default). And running `/usr/lib/frr/frr reload`
failed.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Features added in this commit:
1. Bringup/shutdown new management daemon 'mgmtd' along with FRR.
2. Support for Startup, Candidate and Running DBs.
3. Lock/Unlock DS feature using pthread lock.
4. Load config from a JSON file onto candidate DS.
5. Save config to a JSON file from running/candidate DS.
6. Dump candidate or running DS contents on the terminal or a file in
JSON/XML format.
7. Maintaining commit history (Full rollback support to be added in
future commits).
8. Addition of debug commands.
Co-authored-by: Yash Ranjan <ranjany@vmware.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Pushpasis Sarkar <pushpasis@gmail.com>
Check for value present in list before removing
as in certain python3 ValueError traceback is observed.
Traceback (most recent call last):
File "/usr/lib/frr/frr-reload.py",
line 2278, in <module>
(lines_to_add, lines_to_del, restart_frr)
= compare_context_objects(newconf, running)
File "/usr/lib/frr/frr-reload.py",
line 1933, in compare_context_objects
lines_to_add, lines_to_del
File "/usr/lib/frr/frr-reload.py",
line 1549, in ignore_delete_re_add_lines
lines_to_del.remove((ctx_keys, line))
ValueError: list.remove(x): x not in list
Ticket:#3389979
Issue:3389979
Testing Done:
With fix perform frr-relaod on frr.conf config where earlier
traceback was seen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Using // style comments for the SPDX license identifier was kind of an
intentional choice to make it stand out as "directive-like" comment (and
also to constrain it to the one line.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Got `ERROR: Daemon babeld is not a valid option for 'show running-config'` when using `frr-reload.py --reload --daemon babeld`.
Adds `babeld` and `nhrpd` as valid daemons.
Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
