Read incoming interface address change notifications in the
dplane pthread; enqueue the events to the main pthread
for processing. This is netlink-only for now - the bsd
kernel socket path remains unchanged.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
When calling rib_add_multipath_nhe ensure that we have
well aligned return codes that mean something so that
interersted parties can properly handle the situation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There were a bunch of places where we converted the
route node to a prefix string via srcdest_rnode2str when
we should have been using %pRN in zebra_rib.c. Just
convert over the ones we should to use it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When we are calling rib_process and the route_node
in question has no dest, there is no work to do here
at all. As such we should just return before
attempting to do any other work. This is just a tiny bit
of simplification being done.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move remote VTEP updates from immediate, inline processing
in their ZAPI message handlers to the main workqueue.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Enqueue incoming vxlan remote macip updates on the main
workqueue, instead of performing the updates immediately,
in-line.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add workqueue subqueue for EVPN/VxLAN updates; migrate the
evpn route and remote ES processing from their ZAPI handlers
to the workqueue.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Since _rnode_zlog was wrapping zlog(), these messages weren't getting an
unique ID assigned through the xref mechanism. Replace macro with a
small extension that prints (almost) the same thing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This action is initiated by nhrp and has been stubbed when
moving to zebra. Now, a netlink request is forged to set
the link interface of a gre interface if that gre interface
does not have already a link interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Use the main zebra workqueue for daemon-owned NHGs, in addition
to processing kernel-owned NHGs. The zapi message processing
creates a temporary object that's enqueued to the workqueue,
then processed/installed as part of the workqueue processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of directly configuring the neighbor table after read from zapi
interface, a zebra dplane context is prepared to host the interface and
the family where the neighbor table is updated. Also, some other fields
are hosted: app_probes, ucast_probes, and mcast_probes. More information
on those fields can be found on ip-ntable configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The iptable processing was not handled in remote dataplane, and was
directly processed by the thread in charge of zapi calls. Now that call
can be handled in the zebra_dplane separate thread. once a
zebra_dplane_ctx is allocated for iptable handling, the hook call is
performed later. Subsequently, a return code may be triggered to zclient
interface if any problem occurs when calling the hook call.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
When we need to cause a reprocessing of data the code currently
marks all routes as needing to be looked at. Modify the
rib_update_table code to allow us to specify a specific route
type we only want to reprocess. At this point none
of the code is behaving differently this is just setup
for a future code change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The re->flags and re->status in debugs were being dumped as hex values.
I can never quickly decode this. Here is an idea. Let's let FRR do
it for me.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In the case where a routes nexthops cannot be resolved as part
of route processing, immmediately notify the upper level protocol
that their routes failed to install if they are interested in
being informed about this issue.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
in rib_handle_nhg_replace, do not use new as a parameter name to
allow compilation of c++ code including zebra headers.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Just gather the opaque data into the route entry. Later
commits will display this data for end users as well as
to send it down.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Zebra accumulates route-entry objects and then processes them
as a group. If that rib processing is delayed, because the
dataplane/fib programming has built up a queue e.g., zebra can
hold multiple deleted route objects in memory. At scale, this can
be a problem. Delete unneeded route entries promptly, if they
can't contribute to rib processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a command that allows FRR to know it's being used with
an underlying asic offload, from the linux kernel perspective.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
When we get a route for installation via any method we should
consolidate on 32 bits as the flag size, since we have
actually more than 8 bits of data to bass around.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
