Use oil_incoming_vif instead of oil_parent. I had
to go look this up as that I failed to remember that
the linux kernel calls this parent for some bizarre
reason.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pim_addr_dump would dump the group data as a v4 or v6 address
let's just convert to our internal printf handler.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The cli "show ip pim nexthop json" gives the RPF information.
However it doesn't give PIM enable status on the nexthop interface.
Added pimEnabled field in this clis,
this will tell if PIM is enabled or not on the nexthop interface.
Example:
frr# show ip pim nexthop
Number of registered addresses: 1
Address Interface Nexthop
108.0.0.2 ens224 108.0.0.2
frr# show ip pim nexthop json
{
"108.0.0.2":{
"address":"108.0.0.2",
"nexthops":[
{
"interface":"ens224",
"pimEnabled":true,
"nexthop":"108.0.0.2"
}
]
}
}
frr# configure terminal
frr(config)# int ens224
frr(config-if)# no ip pim
frr(config-if)# end
frr# show ip pim nexthop json
{
"108.0.0.2":{
"address":"108.0.0.2",
"nexthops":[
{
"interface":"ens224",
"pimEnabled":false,
"nexthop":"108.0.0.2"
}
]
}
}
Signed-off-by: Sarita Patra <saritap@vmware.com>
Problem:
-------
The cli "show ipv6 pim state" is not displaying when outgoing
interface list is empty.
This is fixed now.
Before Fix:
----------
frr# show ipv6 pim state json
{
"ffaa::5":{
"1100::10":{
"ens224":{
},
"installed":1,
"isRpt":false,
"refCount":1,
"oilListSize":0,
"oilRescan":0,
"lastUsed":0,
"packetCount":40,
"byteCount":3080,
"wrongInterface":1
}
}
}
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
After fix:
---------
Case 1:
- "show ipv6 pim state" output for 1 mroute with 1 oil.
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224 ens256( J )
Case 2:
- "show ipv6 pim state" output for 1 mroute with multiple oil.
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224 ens192( J )
ens256( J )
Case 3:
- "show ipv6 pim state" output for 1 mroute with no oil
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224
Case 4:
- "show ipv6 pim state" output for multiple mroute with multiple oil
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 * ff05::2 y ens224 pim6reg(I )
ens192(I )
1 * ffaa::5 y ens224 pim6reg(I )
ens192(I )
Issue: #13070
Signed-off-by: Sarita Patra <saritap@vmware.com>
When entering some show commands that use json in pimd
when the interface cannot be found do not output non-json
format in that case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Passing a pre-formatted buffer in these places needs a `"%s"` in front
so it doesn't get formatted twice.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem:
=======
frr(config)# do show ipv6 pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
ens192 up fe80::250:56ff:feb7:3619 0 local 0 1
Configure ens192 interface link-local address as RP.
frr(config)# ipv6 pim rp fe80::250:56ff:feb7:3619
No Path to RP address specified: fe80::250:56ff:feb7:3619
frr(config)# do show ipv6 pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
fe80::250:56ff:feb7:3619 ff00::/8 Unknown yes Static ASM
Fix:
===
RP should not be link-local, multicast and unspecified address.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added common pim_show_bsm_db_helper to suppport both PIM and
PIMV6.
pim_show_bsm_db is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added pim_show_group_rp_mappings_info_helper to suppport both PIM and
PIMV6.
pim_show_group_rp_mappings_info() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added common API pim_show_bsr_helper to suppport both PIM and
PIMV6.
pim_show_bsr() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced common api pim_process_unicast_bsm_cmd,
pim_process_no_unicast_bsm_cmd which will process
both "[no] ip pim unicast-bsm" command and "[no] ipv6 pim
unicast-bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced common api pim_process_bsm_cmd,
pim_process_no_bsm_cmd which will process
both "[no] ip pim bsm" command and "[no] ipv6 pim
bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
show ip pim state should show IGMP Report while
show ipv6 pim state should show MLD Report.
Output After Fix:
frr# do sh ip pim state
Codes: J -> Pim Join, I -> IGMP Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
frr# do sh ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
frr#
Issue: #11249
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The problem here is when the same node is FHR as well as RP,
then the node keeps on sending the register packet.
Register-stop is not sent as well.
This problem has occurred because the RP is the same node
and there is no socket created on loopback interface, so the
packet is never send out and never received back on the same
node, so register recv could not be processed on the node and
hence no register-stop is sent.
Since register packets are unicast packets, its better to handle
the send of register packet via a separate register socket.
This fixes the problem mentioned above as well.
Fixes: #11331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Change the show running commands for bsm and vxlan pimv4 and pimv6
debug commands based on the address family.
Including bsm and vxlan in no debug pimv6 debug.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
