New CLI commands added:
router pim [vrf NAME]
autorp discovery
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
autorp discovery
Enables Auto RP discovery for learning dynamic RP information using the
AutoRP protocol.
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
Enable announcements of a candidate RP with the given group range, or
prefix list of group ranges, to an AutoRP mapping agent.
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
Configure the parameters of the AutoRP announcement messages.
The scope sets the packet TTL.
The interval sets the time between TX of announcements.
The holdtime sets the hold time in the message, the time the mapping
agent should wait before invalidating the candidate RP information.
debug pim autorp
Enable debug logging of the AutoRP protocol
show ip pim [vrf NAME] autorp [json]
Show details of the AutoRP protocol.
To view learned RP info, use the existing command 'show ip pim rp-info'
Extend pim yang for new configuration:
augment /frr-rt:routing/frr-rt:control-plane-protocols/frr-rt:control-plane-protocol/frr-pim:pim/frr-pim:address-family:
+--rw rp
+--rw auto-rp
+--rw discovery-enabled? boolean
+--rw announce-scope? uint8
+--rw announce-interval? uint16
+--rw announce-holdtime? uint16
+--rw candidate-rp-list* [rp-address]
+--rw rp-address inet:ip-address
+--rw (group-or-prefix-list)?
+--:(group)
| +--rw group? frr-route-types:ip-multicast-group-prefix
+--:(prefix-list)
+--rw prefix-list? plist-ref
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Moved all existing global/vrf PIM config to the new subnode.
Existing configuration updated to be hidden and deprecated.
Both versions of configuration still work together.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Added common pim_show_bsm_db_helper to suppport both PIM and
PIMV6.
pim_show_bsm_db is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added pim_show_group_rp_mappings_info_helper to suppport both PIM and
PIMV6.
pim_show_group_rp_mappings_info() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added common API pim_show_bsr_helper to suppport both PIM and
PIMV6.
pim_show_bsr() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced common api pim_process_unicast_bsm_cmd,
pim_process_no_unicast_bsm_cmd which will process
both "[no] ip pim unicast-bsm" command and "[no] ipv6 pim
unicast-bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced common api pim_process_bsm_cmd,
pim_process_no_bsm_cmd which will process
both "[no] ip pim bsm" command and "[no] ipv6 pim
bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Moving the reusable code of pim_show_nexthop apis to common file
pim_cmd_common.c file and adding the json support for show ipv6 pim nexthop
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
For show ip pim interface traffic cli, doing the below changes
1. Changing DEFUN to DEFPY
2. Move the whole code to a common api and modify it so that can
be reused for pimv6.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving pim_show_interface_traffic and pim_show_interface_traffic_single
to pim_cmd_common.c from pim_cmd.c to make it common to
pimd and pim6d.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving the common lines of pim_show_join_vrf and pim_show_join_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_nexthop_lookup cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_nexthop cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_local_membership cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_jp_agg cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_channel cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing pimv6 packets debug to information about packet generation for sending
and about packet handling from a received packet.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
