According to the YANG specification, the revision statements should be
ordered with the most recent revision first
Signed-off-by: y-bharath14 <y.bharath@samsung.com>
Implement embedded RP support and configuration commands.
Embedded RP is disabled by default and can be globally enabled with the
command `embedded-rp` in the PIMv6 configuration node.
It supports the following options:
- Embedded RP maximum limit
- Embedded RP group filtering
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
New CLI commands added:
router pim [vrf NAME]
autorp discovery
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
autorp discovery
Enables Auto RP discovery for learning dynamic RP information using the
AutoRP protocol.
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
Enable announcements of a candidate RP with the given group range, or
prefix list of group ranges, to an AutoRP mapping agent.
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
Configure the parameters of the AutoRP announcement messages.
The scope sets the packet TTL.
The interval sets the time between TX of announcements.
The holdtime sets the hold time in the message, the time the mapping
agent should wait before invalidating the candidate RP information.
debug pim autorp
Enable debug logging of the AutoRP protocol
show ip pim [vrf NAME] autorp [json]
Show details of the AutoRP protocol.
To view learned RP info, use the existing command 'show ip pim rp-info'
Extend pim yang for new configuration:
augment /frr-rt:routing/frr-rt:control-plane-protocols/frr-rt:control-plane-protocol/frr-pim:pim/frr-pim:address-family:
+--rw rp
+--rw auto-rp
+--rw discovery-enabled? boolean
+--rw announce-scope? uint8
+--rw announce-interval? uint16
+--rw announce-holdtime? uint16
+--rw candidate-rp-list* [rp-address]
+--rw rp-address inet:ip-address
+--rw (group-or-prefix-list)?
+--:(group)
| +--rw group? frr-route-types:ip-multicast-group-prefix
+--:(prefix-list)
+--rw prefix-list? plist-ref
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
YANG files get to keep their license boilerplate in addition to the SPDX
header, since they are likely to be copied around individually.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
