Install frr.conf template as a template file, but only install it
as a config file if no per daemon file exists. This will use the
integrated config with new setups, but keeps the per-daemon config
for existing users
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Signed-off-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
It's time to say good bye to libyang 0.16.105. The recently
released libyang 1.0.184 includes numerous bug fixes and performance
improvements that we need.
Despite the major version bump from 0.x to 1.x, the libyang API is
the same except for a single backward-incompatible change in the
user types interface (which we're currently not using). Hence no
code changes were necessary to adapt FRR to libyang 1.x.
This commit also reintroduces some leafrefs that needed to be
removed from our YANG modules due to a bug that was present on
libyang 0.16.105.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Changes:
* Let the package builder scripts know that we have a new module that
needs to be taken care of.
* Include the frr atomic header to avoid undeclared atomic operations.
* Disable build on *BSDs because the code is using some zebra netlink
functions only available for Linux.
* Move data plane FPM module outside old FPM automake definition.
* Fix atomic usage for Ubuntu 14.04 (always use explicit).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Solves:
```
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
/usr/bin/sed: couldn't write 40 items to stdout: Broken pipe
```
This happens because `grep -q` returns immediately after first match
and closes the pipe while sed has more output to write.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
RPM build errors:
bogus date in %changelog: Sun May 28 2018 Rafael Zalamena <rzalamena@opensourcerouting.org> - 7.3_dev_MyRPMVersion
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This is pretty much just to get rid of the HAVE_CUMULUS. The
hook/module API is as "wtf" as it was before...
Signed-off-by: David Lamparter <equinox@diac24.net>
This commit is to copy the support bundle scripts to appropriate directories during installation
Signed-off-by: Sri Mohana Singamsetty <msingamsetty@vmware.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Drop the special versions of frr.init/frr.service/daemons from redhat/
and use the generic versions instead.
Tested-by: Liam McBirnie <liam.mcbirnie@boeing.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
The support of embedded extensions doesn't allow to build the
RPM with and without (for older version). Require new version of
Lbyang with embedded extensions supported
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Currently our systemd dependencies look something like this (example
from vanilla Debian 9):
$ systemctl list-dependencies frr
frr.service
● ├─system.slice
● └─sysinit.target
...
$ systemctl list-dependencies --reverse frr
frr.service
● └─network-online.target
● └─apt-daily.service
Note that sysinit.target does not depend on any network* service or
target.
In other words, unless there is a service that requires
network-online.service, even if FRR is enabled it will not be started.
Therefore network-online.target is the wrong unit to have in WantedBy=,
as it is not always started.
This patch updates our service file so that it is properly started by
the system when enabled, delayed until networking is up, and if possible
delayed until after NetworkManager, systemd-networkd or any other
networking configuration manager has finished performing its tasks -
i.e. after network-online.target.
After these changes our new dependency graph looks like this:
$ systemctl list-dependencies frr
frr.service
● ├─system.slice
● │ └─networking.service
● ├─network.target
● └─sysinit.target
...
$ systemctl list-dependencies --reverse frr
frr.service
● └─multi-user.target
● └─graphical.target
This way, FRR will be started by multi-user.target (just like most
applications), but delayed until after networking has been configured.
In the same stroke, this should also fix issues on systems that do not
provide "networking.service" (such as CentOS 7).
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
This reverts commit ec59a1559c.
Frr.init (called by frr.service) requires functions provided by
/etc/init.d/functions (part of the initscripts package).
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
This separates the init script used for the system (and called in the
systemd unit file) from the script that watchfrr uses to control
daemons. Mixing these two caused the entire thing to become a rather
huge spaghetti mess.
Note that there is a behaviour change in that the new script always
starts zebra regardless of zebra_enable.
Side changes:
- Ubuntu 12.04 removed from backports since it doesn't work anyway
- zebra is always started regardless of zebra_enable. To disable FRR,
the entire init script should be disabled through policy.
- no-watchfrr operation is no longer supported by the scripts in the
Debian packages. (This is intentional.)
Signed-off-by: David Lamparter <equinox@diac24.net>
CONFDATE should not be used like this. Also, the extraversion is now
burned into tarballs anyway so this is no longer neccessary.
Signed-off-by: David Lamparter <equinox@diac24.net>
Both of these are testing/demo-style tools that don't make sense as part
of a normal installation. So don't install them.
NB: this is only the executables, libospfclient and the RFP code are not
affected.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add BFD daemon to the build process and packaging instructions.
Currently the bfdd daemon does nothing, this is just to document how the
daemon insertion step occured.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add code to allow FRR to properly build and handle the staticd
for some of the more common packaging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With systemd being the default on more systems now, lets
configure watchfrr to start else systemd systems on
redhat will not stay up for more than 1 minute.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
While we have docs on various pieces of the build system we don't have
any docs on how to actually get FRR running once it's installed, nor do
we have comprehensive documentation on the basic procedure for building
from source. This patch remedies both of those.
Also updated the services list in the docs and removed the SERVICES file
from the project root.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Updated README to point to new bug report location
* Updated README to point to community doc location
* Remove COMMUNITY.md
* Remove references to no longer extant docs in packaging files
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
