VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
These really don't serve much of a purpose, especially with how
inconsistently they're used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Fix:
====
Modifying name of struct igmp_join to struct gm_join, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Abhishek N R abnr@vmware.com
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem reported that when certain pim commands were entered, they
showed up duplicated in the configuration both under default instance
and every vrf (whether pim was used there or not.) This was because
these particular parameters are global only and the function doing
the display would repeat for each vrf. This fix only displays those
in the default case (and removes them from the help for entering
under a vrf.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Display the MSDP peer configuration in `show running-config` so it can
be saved on configuration write.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
pim is enabled internally/implicitly on the vxlan termination device
and displaying that can confuse the admin and tools (such as
frr-reload).
Ticket: CM-30180
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This CLI will allow user to configure a igmp group limit which will generate
a watermark warning when reached.
Though watermark may not make sense without setting a limit, this
implementation shall serve as a base to implementing limit in future and helps
tracking a particular scale currently.
Testing:
=======
ip igmp watermark-warn <10-60000>
on reaching the configured number of group, pim will issue warning
2019/09/18 18:30:55 PIM: SCALE ALERT: igmp group count reached watermak limit: 210(vrf: default)
Also added group count and watermark limit configured on cli - show ip igmp groups [json]
<snip>
Sw3# sh ip igmp groups json
{
"Total Groups":221, <=====
"Watermark limit":210, <=========
"ens224":{
"name":"ens224",
"state":"up",
"address":"40.0.0.1",
"index":6,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"groups":[
{
"source":"40.0.0.1",
"group":"225.1.1.122",
"timer":"00:03:56",
"sourcesCount":1,
"version":2,
"uptime":"00:00:24"
<\snip>
<snip>
Sw3(config)# do sh ip igmp group
Total IGMP groups: 221
Watermark warn limit(Set) : 210
Interface Address Group Mode Timer Srcs V Uptime
ens224 40.0.0.1 225.1.1.122 ---- 00:04:06 1 2 00:13:22
ens224 40.0.0.1 225.1.1.144 ---- 00:04:02 1 2 00:13:22
ens224 40.0.0.1 225.1.1.57 ---- 00:04:01 1 2 00:13:22
ens224 40.0.0.1 225.1.1.210 ---- 00:04:06 1 2 00:13:22
<\snip>
Signed-off-by: Saravanan K <saravanank@vmware.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Upstream entries associated with tunnel termination mroutes are
synced to the MLAG peer via the local MLAG daemon.
2. These entries are installed in the peer switch (via an upstream
ref flag).
3. DF (Designated Forwarder) election is run per-upstream entry by both
the MLAG switches -
a. The switch with the lowest RPF cost is the DF winner
b. If both switches have the same RPF cost the MLAG role is
used as a tie breaker with the MLAG primary becoming the DF
winner.
4. The DF winner terminates the multicast traffic by adding the tunnel
termination device to the OIL. The non-DF suppresses the termination
device from the OIL.
Note: Before the PIM-MLAG interface was available hidden config was
used to test the EVPN-PIM functionality with MLAG. I have removed the
code to persist that config to avoid confusion. The hidden commands are
still available.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Allow 'ip igmp join' to join group for any source if no source is
specified.
Disallow joining source "0.0.0.0" as it is used to define an
any-source multicast group.
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
Original Idea is to display normal & detailed debugs when detailed
debug alone is configured. because of this "sh debugs" are showing
wrong Information, because same macro is used to disply the configured
debugs.
that means even if Normal debug is configured, detailed macro returns
TRUE. To avoid this ambiguity check whetehr detailed debug is configured
or not during dumping configured debugs. In all other places using
old macro.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
There has never been a `debug igmp trace detail` but we have
had code to display this when we had the appropriate flags
set. Since we never can accept this, let's remove this.
This showed up because of commit:0ab16492d2d9fcc6cba7e001227deed6765ed261
where we re-arranged some debugs to combine them being turned on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
(intf)ip pim bsm - to enable bsm processing on the interface
(intf)no ip pim bsm - to disable bsm processing on the interface
(intf)ip pim unicast-bsm - to enable ucast bsm processing on the interface
(intf)no ip pim unicast-bsm - to disable ucast bsm processing on the interface
Note: bsm processing and ucast bsm processing is enabled by default on a
pim interface. The CLI is implemented as a security feature as recommended by
RFC 5059
Signed-off-by: Saravanan K <saravanank@vmware.com>
The MLAG component on the switch is expected to provide some
properties (such as peerlink-rif) to bootstrap the anycast-VTEP
functionality. The final interface for this is being defined as
a part of the pim-mlag functionality.
This commit provides a hidden command to test the anycast-VTEP
functionality independent of the MLAG component.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If `ip igmp query-max-response-time` is set move it to
display first as that this command has order dependencies
on `ip igmp query-interval`.
Ticket: CM-21598
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
pim is vrf aware and the interface based line for vrf's was
not being started with a vrf_frame as the non interface
based line was.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
All PIM Neighbors for a given pim interface is registered with
BFD.
Upon receiving BFD status down event, PIM Neighbor with BFD info is deleted.
Add pim bfd configuraiton (CLI) per interface, '[no] ip pim bfd'
Testing Done:
Configure BFD under PIM interface on all neighbor routers,
check bfd sessions up, remote end unconfigure BFD, results in BFD session down.
Previous state was UP to New state DOWN, results in PIM neighbor delete behind
that particular pim interface.
Pim-smoke Results:
Ran 94 tests in 7409.680s
FAILED (SKIP=8, failures=2)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ip pim ecmp and ip pim ecmp rebalance configuration CLIs were
not adding to Quagga.confg or running configuration.
Added both the configuration write in Config write handler.
Testing Done: Execute configuration cli and verified running config
and Quagga.conf file containing both configuration.
03# show running-config
Building configuration...
Current configuration:
!
ip multicast-routing
ip pim rp 6.0.0.9 230.0.0.0/16
ip pim join-prune-interval 61
ip pim ecmp
ip pim ecmp rebalance
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
To the 'ip pim spt-switchover infinity-and-beyond' command
add 'prefix-list <PLIST>'. To the command.
Use this as the basis to deny (Not immediate switchover)
or permit (Immediate switchover), based upon matching
the group address and the prefix-list.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code change adds the ability to specify that
we should be able to work with older versions
of PIM.
In future commits we will actually use this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Interface type has been replaced with the SSM range config. And SSM
groups can now co-exists with ASM groups. I have left the pim ssm
per-interface cli control hidden. It now enables pim-sm with a warning.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done: pim-smoke
SSM groups (232/8 or user configured SSM range) can exist in the same
multicast network as ASM groups. For such groups all RPT related state
machine operations have to be skipped as defined by section 4.8 of
RFC4601 -
1. Source registration is skipped for SSM groups. For SSM groups mroute
is setup on the FHR when a new multicast flow is rxed; however source
registration (i.e. pimreg join) is skipped. This will let the ASIC black
hole the traffic till a valid OIL is added to the mroute.
2. (*,G) IGMP registrations are ignored for SSM groups.
Sample output:
=============
fhr# sh ip pim group-type
SSM group range : 232.0.0.0/8
fhr# sh ip pim group-type 232.1.1.1
Group type: SSM
fhr# sh ip pim group-type 239.1.1.1
Group type: ASM
fhr#
Sample config:
=============
fhr(config)# ip pim ssm prefix-list ssm-ranges
fhr(config)#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done:
1. SSM/ASM source-registration/igmp-joins.
2. On the fly multicast group type changes.
3. pim-smoke.
Automatically turn on pim if the daemon is turned on.
Hide the 'ip multicast-routing' command
Disable the 'no ip multicast-routing' command
Do not display the 'ip multicast-routing' command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When issuing a vtysh -m command it expects the
output it receives to be the complete command
not a partial match.
The 'debug pim packets joins' command
was being outputted as 'debug pim packets join'
This was making quagga-reload.py unhappy. Adding
the joins word allows it to complete successfully
Ticket: CM-13805
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Make the 'ip igmp query-max-response-time' command
take input in deci-seconds and make the
'ip igmp query-max-response-time-dsec' command hidden.
Ticket:CM-13786
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Anycast rp requires multiple ip addresses on the lo. If PIM is used in
an unnumbered BGP network it picks one of the lo addresses as the
pim-primary for the swp interfaces. But if the anycast IP is picked up
by both sides pim nbr will never converge. So a static "use-source" config
is provided to allow the administrator to force the the hello source to the
unique IP address.
Sample output:
=============
dell-s6000-04(config-if)# do show running-config pimd
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
interface lo
ip pim sm
ip pim use-source 100.1.1.5
!
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo
Interface : lo
State : up
Use Source : 100.1.1.5
Address : 100.1.1.5 (primary)
100.1.1.100
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo json
{
"lo":{
"name":"lo",
"state":"up",
"address":"100.1.1.5",
"index":1,
"lanDelayEnabled":true,
"useSource":"100.1.1.5",
"secondaryAddressList":[
"100.1.1.100"
],
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'ip pim packets <1-100>' command.
Allows you to control the number of packets read in before
giving control back to another part of the process.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the 'ip pim register-suppress-time ...' command.
Remove the 'no ip pim rp keep-al...' command as
that the register suppress set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Add support for mesh-group based configuration that is easy to apply
via automation. The older per-peer configuartion is temporarily hidden
and will be cleaned up later.
Sample config -
ip msdp mesh-group cumulus source 100.1.1.4
ip msdp mesh-group cumulus member 100.1.1.5
ip msdp mesh-group cumulus member 100.1.1.6
2. Added support for detail peer and sa-cache displays. Along with
filter keys.
3. Add json output for all the msdp displays.
With this commit basic support for anycast-RP with MSDP (in numbered
network is complete). Unnumbered support will be added separately.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes -
1. Maintaining SA cache with local and remote entries.
2. Local SA entries - there are two cases where we pick up these -
- We are RP and got a source-register from the FHR.
- We are RP and FHR and learnt a new directly connected source on a
DR interface.
3. Local entries are pushed to peers immediately on addition and
periodically. An immediate push is also done when peer session is
established.
4. Remote SA entries - from other peers in the mesh group and passed
peer-RPF checks.
5. Remote entries are aged out. No other way to del them
currently. In the future we may add a knob to flush entries on
peer-down.
Testing done -
Misc topologies with CL routers plus basic interop with another vendor (
we can process their SA updates and they ours).
Sample output -
root@rp:~# vtysh -c "show ip msdp sa"
Source Group RP Uptime
33.1.1.1 239.1.1.2 local 00:02:34
33.1.1.1 239.1.1.3 local 00:02:19
44.1.1.1 239.1.1.4 100.1.3.1 00:01:12
44.1.1.1 239.1.1.5 100.1.3.1 00:00:55
root@rp:~#
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a static igmp join is issued, before routing
has come up, the ability to recover was accidently
removed from the code.
Ticket: CM-13379
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
