(Somewhat) useful when dealing with an interface that has only one host
attached. Only works for IGMPv2 and MLDv1, other protocol versions have
no leave message.
Co-authored-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
For groups we can just look at the length of the list, for sources we
need to count them on a per-interface level.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Rather than storing the prefix-list name and looking it up every time we use it, store a pointer to the prefix-list itself.
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
Add new interface command ip multicast boundary ACCESSLIST4_NAME. This
allows filtering on both source and group using the extended access-list
syntax vs. group-only as with the existing "ip multicast boundary oil"
command, which uses prefix-lists. If both are configured, the prefix-
list is evaluated first. The default behavior for both prefix-lists and
access-lists remains "deny", so the prefix-list must have a terminating
"permit" statement in order to also evaluate against the access-list.
The following example denies groups in range 229.1.1.0/24 and groups in
range 232.1.1.0/24 with source 10.0.20.2:
!
ip prefix-list pim-oil-plist seq 10 deny 229.1.1.0/24
ip prefix-list pim-oil-plist seq 20 permit any
!
access-list pim-acl seq 10 deny ip host 10.0.20.2 232.1.1.0 0.0.0.255
access-list pim-acl seq 20 permit ip any any
!
interface r1-eth0
ip address 10.0.20.1/24
ip igmp
ip pim
ip multicast boundary oil pim-oil-plist
ip multicast boundary pim-acl
!
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
Use existing igmp static join infrastructure.
Add an enum to distinguish static from proxy joins.
Signed-off-by: Barry A. Trent <barry.trent@atcorp.com>
This will add a static IGMP group that does not rely on an underlying
socket join which sends traffic to the cpu unneccesarily. Instead, the
groups are joined directly without any IGMP interactions.
New command is under interfaces, 'ip igmp static-group ...'.
Added an alias for 'ip igmp join ...' to 'ip igmp join-group'.
Moved IGMP join groups to new yang list "join-group" and reused
the "static-group" list for the IGMP static groups.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Move the mld/igmp deletion common code to api pim_gm_interface_delete
code for IPv6 deletion(gm_ifp_teardown) for MLD was missing in this flow
Making the code common fixes this too.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Rename pim_cmd_interface_delete to pim_pim_interface_delete
and move the api to pimd/pim_iface.c
Changed the return type of the api from int to void.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fresh ground-up MLD implementation with subscriber-tracking for MLDv2.
Intended to be adapted for IPv4 and replace the IGMP implementation at a
later point.
Tested in ANVL, currently at 94/116. Some issues/TODOs are left in the
code as CPP_NOTICE markers, but the code is very much good enough to
proceed since otherwise we're blocked on overall PIM v6 progress.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
I should've removed this in #10960. It's a hazard in terms of
forgetting to adjust PRs/other changes that might accidentally still
reference the field.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The only function these macros have is to make the code confusing.
"PIM_IF_DO_PIM" sounds like it triggers some action, but it doesn't.
Replace with "bool" fields in struct pim_interface.
(Note: PIM_IF_*_IGMP_LISTEN_ALLROUTERS was always set, without any way
to unset it. It is completely removed now and always enabled.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We only care about link-local addresses for IPv6 operation. Also, MLD
needs the lowest while PIM needs the highest...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Changed struct in_addr address to struct pim_addr in struct
pim_iface_upstream_switch which is to be used in both IPv4
and IPv6(Both MLD and IGMP).
Reviewed-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: sarita patra <saritap@vmware.com>
Based on compiler option, pim_addr will be changed to in_addr
or in6_addr for pimd and pim6d respectively.
Reviewed-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Problem Statement:
==================
pim maintains two counters hello tx and hello rx at interface level.
At present pim needs to send the hello message prior to other pim
message as per RFC. This logic is getting derived from the tx hello
counters. So when a new neighbor is added, tx counters are set to
zero and then based on this, it is further decided to send hello in
pim_hello_require function.
Fix:
====
Separating the hello statistics and the logic to decide when to send hello
based on a new flag. pim_ifstat_hello_sent will be used to note down
the hello stats while a new flag is added to decide whether to send hello
or not if it is the first packet to a neighbor.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
pimd's include files are very interdependent. Let's chop that down a
bit to gain some flexibility.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
IGMP packets received from a source that does not match the subnet
of any configured addresses on the receive interface should be
ignored.
Also, find and use the correct IGMP socket object for the received
IGMP packet.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
RCA: Upstreams which are in register state other than noinfo, doesnt remove
register tunnel from oif after it becomes nonDR
Fix: scan upstreams with iif as the old dr and check if couldReg becomes false.
If couldreg becomes false from true, remove regiface and stop reg timer.
Do not disturb the entry. Later the entry shall be removed by kat expiry.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Initially, MLAG Sync is happened at pim_ifchannel, this is mainly to
support even config mismatches(missing configuration of dual active).
But this causes more syncs for each entry.
and also it is not In-line with PIM EVPN. to avoid that moving to
pm_upstream based syncing.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
ipmr-lo is a dummy netdev with no additional addressing requirements -
root@TORS1:~# ip -d link show ipmr-lo
28: ipmr-lo: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/ether 12:5a:ae:74:51:a2 brd ff:ff:ff:ff:ff:ff promiscuity 0
dummy addrgenmode eui64
root@TORS1:~#
This device is used by pim-vxlan to signify multicast-vxlan-tunnel
termination.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
