In preperation for Extended LSA types and their TLVs, factor out the TLV
handling from the Gracefull Restart functionality.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem Statement:
=================
The feature is not enabled, needs to be enabled by doing required
initialization.
RCA:
====
Changes to support the feature is present, but the feature macro
needs to be enabled.
Fix:
====
This commit has changes to enable the code.
Risk:
=====
Medium
Need to ensure all existing ospf6 related topotests pass. to ensure
packet processing is not impacted.
Tests Executed:
===============
Have tested the functionality with enabling openssl and also disabling
openssl.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Currently the ospf6d's commands with non-exist vrfs can't give the error
informations to users.
This commit adds a macro "OSPF6_CMD_CHECK_VRF" to give error information
if with non-exist vrfs. As usual, skip the checking process in the case
of json.
So one command can call this macro to do the checking process in its
end. At that time it need know json style or not, so add "json" parameter for
several related functions.
BTW, suppress the build warning of the macro `OSPF6_FIND_VRF_ARGS`:
"Macros starting with if should be enclosed by a do - while loop to avoid
possible if/else logic defects."
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Issue #9535 describes how the export-list/import-list commands work
differently on ospfd and ospf6d.
In short:
* On ospfd, "area A.B.C.D export-list" filters which internal
routes an ABR exports to other areas. On ospf6d, instead, that
command filters which inter-area routes an ABR exports to the
configured area (which is quite counter-intuitive). In other words,
both commands do the same but in opposite directions.
* On ospfd, "area A.B.C.D import-list" filters which inter-area
routes an ABR imports into the configured area. On ospf6d, that
command filters which inter-area routes an interior router accepts.
* On both daemons, "area A.B.C.D filter-list prefix NAME <in|out>"
works exactly the same as import/export lists, but using prefix-lists
instead of ACLs.
The inconsistency on how those commands work is undesirable. This
PR proposes to adapt the ospf6d commands to behave like they do
in ospfd.
These changes are obviously backward incompatible and this PR doesn't
propose any mitigation strategy other than warning users about the
changes in the next release notes. Since these ospf6d commands are
undocumented and work in such a peculiar way, it's unlikely many
users will be affected (if any at all).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With this sequence of events:
eva# conf
eva(config)# router ospf6
eva(config-ospf6)# end
eva# show ipv6 ospf data adv-router 0.0.0.0 linkstate-id 0.0.0.0
OSPF6: Received signal 11 at 1630442431 (si_addr 0x0, PC 0x559dcfa3a656); aborting...
OSPF6: zlog_signal+0x18c 7fd2cc8229f7 7fff606775d0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: core_handler+0xe3 7fd2cc8616ad 7fff606776f0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: funlockfile+0x50 7fd2cc74f140 7fff60677840 /lib/x86_64-linux-gnu/libpthread.so.0 (mapped at 0x7fd2cc73b000)
OSPF6: ---- signal ----
OSPF6: ospf6_lsdb_type_show_wrapper+0x5d 559dcfa3a656 7fff60677dd0 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
OSPF6: show_ipv6_ospf6_database_adv_router_linkstate_id+0x1f9 559dcfa3c24a 7fff60677e50 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
OSPF6 crashes. Fix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
When an "export-filter" or "filter-list out" was configured on an area the
filter was not applied to existing database. The user would either have
to restart the neighboring router in the other area or issue a "clear ipv6
ospf6 interface" to cause the neighbor router to resend it's LSAs. The
new filter would then be applied to these LSAs and permit or deny summary
LSAs from being added/removed from the database. The code now applies the
filters to the existing database without user needing to take any action
to clear ospfv3 adjacencies.
The second part of the problem was if a rule changed the updated filter was
not applied. The code has been modifed to now process the rule update and
reapply the filter.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Same as other commits -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Modify code to add JSON format output in show command
"show ipv6 ospf6 route [<intra-area|inter-area|external-1|
external-2|X:X::X:X|X:X::X:X/M|detail|summary>]"
with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
ospf6_network.h needs ospf6_top.h to be included
first.
This makes newer versions of gcc much much happier.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. The socket() call is changed to vrf_socket().
2. The ospf6 instance creation api added.
3. The global socket fd is replaced with ospf6->fd.
4. All dependency of the global socket is resolved.
5. Added the ospf6 receive timer in the global structure.
6. Performed the thread off on receive timer when we do "no router ospf6".
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
An OSPFv3 enabled Router can originate or receive
multiple Link State-IDs for Router LSAs.
As per RFC 5340 A 4.3, more than one Router LSAs,
from given Vertex is considered (as concatenated)
single large Router LSA.
Created hidden show command to simulate concatenated
large LSA from advertising/self Router LSAs.
Ticket:CM-19329
Reviewed By:
Testing Done:
Simulate 160 subinterfaces between R1 === R2--R3,
This triggers R1 and R2 to generate multiple link state
IDs for Router LSAs. During SPF calculation only aggregated
single router LSA processed and SPF tree formed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Register add/delete hooks with the prefix list code to properly change
ospf6_area's prefix list in/out pointers.
There are 2 other uncached uses of prefix lists in the ASBR route-map
code and the interface code; these should probably be cached too. (To
be fixed another day...)
Fixes: #453
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This version string has not been updated in over 11 years.
I cannot see any viable reason that we should use or update
or anything with this value, remove.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
