The original TLV_HDR_TOP implementation only worked for Graceful Restart
LSAs, because they had no "LSA body".
This change introduces a body size lookup table and changes the
macro to a function that accounts for the LSA body for all LSA types,
and provides type checking on the provided pointer before arithmetic.
It also removes the open type casting and pointer arithmetic.
The introduced lsdesc_start() is used to find the start of a descriptor,
and will be used for TLVs in E-LSAs as well as old LSA.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
The void * return type of the replacement enables the removal of a
cast at every point of use, and the name no longer suggests that it
points to the last byte of the header.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Dropping the macro enables better compiler type checking.
The macro was not used consistently when reading the lsa size from the
header, so this change also aims to use the replacement inline function
consistently.
Keeping the inline function has (marginal) utility in that it ensures that
the endian conversion is consistently performed.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Replacing the macro with an inline function allows the compiler to
check the parameter type.
Use the replacement function consistently to reduce the number of
open coded pointer cast plus offset calculations.
use tools/indent.py to reformat all occurences of its use.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Make the ospf6_lsa_unlock take the same parameters
that the ospf_lsa_unlock does to make it consistent
and to also ensure that no-one can make the mistake
of getting the pointer cleared up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Every received or originated LSA is automatically scheduled to be
refreshed periodically, there's no need to do that manually here.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Feature Implementation.
========================
This feature will help in advertising the External LSAs with aggregation.
The commands allow us to tune the advertisement with different parameters
as mentioned in the CLI List below.
It can also help in case we do not want to advertise any prefix with the
no-advertise option.
New CLIs added:
===============
summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
no summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
summary-address X:X::X:X/M$prefix no-advertise
no summary-address X:X::X:X/M$prefix no-advertise
aggregation timer (5-1800)
no aggregation timer (5-1800)
show ipv6 ospf6 summary-address [detail$detail] [json]
debug ospf6 lsa aggregation
CAT RUN:
========
QE to add test scripts
Signed-Off-by: Mobashshera Rasool <mrassol@vmware.com>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
The normal ospf6_lsa_lock call should return the pointer
to the lock data structure we are holding. This is the
normal pattern for locking a data structure in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ospf6_lsa_unlock may free the lsa data structure as such
we cannot use the passed in data structure after freeing it.
Provide a mechanism to know if the data has been freed
using the same usage patterns of other _unlock functions
in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are seeing this crash:
New LWP 7673]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d -d -F datacenter -M snmp -A ::1'.
Program terminated with signal SIGABRT, Aborted.
(gdb) bt
vtysh=vtysh@entry=0) at lib/command.c:1288
(gdb)
The command entered is `debug ospf6 lsa inter-router examin`. Code
inspection leads us to the fact that FRR is declaring the data as
const but we are attempting to modify it, causing the crash.
Remvoe the const of this set/get and let things work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This serves no other purpose than to generate stupid warnings for
overwritten initializers on old gcc versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
RFC 2328 (14.1) Premature aging of LSAs from
routing domain :
When ospf6d is going away (router going down),
send MAXAGEd self originated LSAs to all
neighbors in routing domain to trigger
Premature aging to remove from resepective LSDBs.
Neighbor Router Reboot:
Upon receiving Self-originate MAXAGEd LSA, simply
discard, Current copy could be non maxaged latest.
For neighbor advertised LSA's (current copy in LSDB)
is set to MAXAGE but received new LSA with Non-MAXAGE
(with current age), discard the current MAXAGE LSA,
Send latest copy of LSA to neighbors and update the
LSDB with new LSA.
When a neighbor transition to FULL, trigger AS-External
LSAs update from external LSDB to new neighbor.
Testing:
R1 ---- DUT --- R5
| \
R2 R3
|
R4
Area 1: R5 and DUT
Area 0: DUT, R1, R2, R3
Area 2: R2 R4
Add IPv6 static routes at R5
Redistribute kernel routes at R5,
Validate routes at R4, redistributed via backbone
to area 2.
Stop n start frr.service at R5 and validated
MAXAGE LSAs then recent age LSAs in Database at DUT-R4.
Validated external routes installed DUT to R4.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
An OSPFv3 enabled Router can originate or receive
multiple Link State-IDs for Router LSAs.
As per RFC 5340 A 4.3, more than one Router LSAs,
from given Vertex is considered (as concatenated)
single large Router LSA.
Created hidden show command to simulate concatenated
large LSA from advertising/self Router LSAs.
Ticket:CM-19329
Reviewed By:
Testing Done:
Simulate 160 subinterfaces between R1 === R2--R3,
This triggers R1 and R2 to generate multiple link state
IDs for Router LSAs. During SPF calculation only aggregated
single router LSA processed and SPF tree formed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The recent clang fixes for Static Analysis were run without
compiling `--enable-snmp` these changes broke the snmp build.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Avoid show() methods from being a NULL function when it is called.
Meanwhile, I did const'ify the handlers so only its debug field can be changed.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Support stubby and totally stubby areas in OSPFv3
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Unlike OSPFv2, the LSID of an LSA isn't sufficient to know what the contents
of the LSA are. Its useful for debugging and basic eyeball tests to see the
contents of the LSA in the simple tabular format of "show ipv6 ospf6 database".
This patch adds that output to the command. It replaces the existing fields of
"duration, Chksum and Length" with a single field called Payload which is
dependent on the LSA type. For Inter-Area Prefix, Intra-Area Prefix and
AS-External LSAs, this will be the advertised prefix/prefix length, for Router
LSAs, it is RtrID/IfID etc.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
[DL: rebase fix, line disappeared in ospf6_abr_originate_summary_to_area]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Shrijeet Mukherjee <shm at cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
[DL: mechanical adjust to rebase]
[DL: adjust to removal of timerwheel code]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
the performance in the presence of a large number of LSAs. I also verified
that the performance improvements stayed in the presence of a large number
of peers (I tested upto 128).
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>Summary:
Reviewed-by: James Li <jli at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Rearranging common defs and structures for use betweeen OSPFv2 and
OSPFv3. Created a new file called libospf.h under lib directory to
hold defines that are common between OSPFv2 and OSPFv3 code bases.
[DL: split of defines refactor from timer refactor]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
