This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have 2 competing versions of likely and unlikely
in babeld and nhrpd. Standardize onto lower case
versions and consolidate in the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When dropping an interface (e.g. at shutdown) while there are still
valid cache entries, the reference held on the cache entries' peer
pointers was leaking.
Fixes: #12505
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
This has already been a requirement for Solaris, it is still a
requirement for some of the autoconf feature checks to work correctly,
and it will be a requirement for `-fms-extensions`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
add a parameter to resolver api that is the vrf identifier. this permits
to make resolution self to each vrf. in case vrf netns backend is used,
this is very practical, since resolution can happen on one netns, while
it is not the case in an other one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774e ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This is required because with the cache entry in place traffic will continue
via the shortcut path until the cache entry expires.
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
RFC2332 requires prefix length be 0xFF only when uniqueness bit is set.
Without this change Cisco spokes will reject resolution request messages
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
preserve mtu upon interface flapping and tunnel source change.
Signed-off-by:Reuben Dowle <reuben.dowle@4rf.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
flush netlink related dependencies with gre information.
Add some linux headers required to compile with it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
as zebra has a new api to get gre and set gre source commands,
netlink gre get and netlink gre source function calls are redirected to zebra
by using the zapi interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
neighbor notifications are done in zebra. so, instead of relying on
nhrp, rely on zebra by using zebra api interface.
Consequently, the code originally used in nhrp for netlink neighor
notification is no more used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
lookup appropriate ipsec path. there are systems where the path where
the charon.vici file is not in standard paths. For that, 'ipsec
--piddir' may help in solving the path.
result of ipsec --piddir is as follow for example:
'
/etc/ike/ipsec.d/run
'
Note that the assumption is done that even if there are several
instances of strongswan across the vrfs, the charon.vici path file is
the same across vrfs. Consequently, as there is a thread per vrf that
performs vici initialisation, and file path retrieval is part of the
vici initialisation procedure, in order to avoid intempestive system
calls, use a boolean 'vici_charon_filepath_done' to avoid doing
unnecessary calls.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For some reason the usage of tabs in a string snuck in as well
as using a sockunion2str instead of %pSU. Fix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Forwarding multicast is a pre-requisite for allowing multicast based routing
protocols such as OSPF to work with DMVPN
This code relies on externally adding iptables rule. For example:
iptables -A OUTPUT -d 224.0.0.0/24 -o gre1 -j NFLOG --nflog-group 224
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
