- Addressed memory leak by removing `&c->peer_notifier` from the notifier list on termination. Retaining it caused the notifier list to stay active, preventing the deletion of `c->cur.peer`
thereby causing a memory leak.
- Reordered termination steps to call `vrf_terminate` before `nhrp_vc_terminate`, preventing a heap-use-after-free issue when `nhrp_vc_notify_del` is invoked in `nhrp_peer_check_delete`.
- Added an if statement to avoid passing NULL as hash to `hash_release`, which leads to a SIGSEGV.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in nhrp_topo.test_nhrp_topo/r1.asan.nhrpd.20265
=================================================================
==20265==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x7f80270c9b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7f8026ac1eb8 in qmalloc lib/memory.c:100
#2 0x560fd648f0a6 in nhrp_peer_create nhrpd/nhrp_peer.c:175
#3 0x7f8026a88d3f in hash_get lib/hash.c:147
#4 0x560fd6490a5d in nhrp_peer_get nhrpd/nhrp_peer.c:228
#5 0x560fd648a51a in nhrp_nhs_resolve_cb nhrpd/nhrp_nhs.c:297
#6 0x7f80266b000f in resolver_cb_literal lib/resolver.c:234
#7 0x7f8026b62e0e in event_call lib/event.c:1969
#8 0x7f8026aa5437 in frr_run lib/libfrr.c:1213
#9 0x560fd6488b4f in main nhrpd/nhrp_main.c:166
#10 0x7f8025eb2c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 112 byte(s) leaked in 1 allocation(s).
***********************************************************************************
***********************************************************************************
Address Sanitizer Error detected in nhrp_topo.test_nhrp_topo/r2.asan.nhrpd.20400
=================================================================
==20400==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x7fb6e3ca5b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7fb6e369deb8 in qmalloc lib/memory.c:100
#2 0x562652de40a6 in nhrp_peer_create nhrpd/nhrp_peer.c:175
#3 0x7fb6e3664d3f in hash_get lib/hash.c:147
#4 0x562652de5a5d in nhrp_peer_get nhrpd/nhrp_peer.c:228
#5 0x562652de1e8e in nhrp_packet_recvraw nhrpd/nhrp_packet.c:325
#6 0x7fb6e373ee0e in event_call lib/event.c:1969
#7 0x7fb6e3681437 in frr_run lib/libfrr.c:1213
#8 0x562652dddb4f in main nhrpd/nhrp_main.c:166
#9 0x7fb6e2a8ec86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 112 byte(s) leaked in 1 allocation(s).
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When dropping an interface (e.g. at shutdown) while there are still
valid cache entries, the reference held on the cache entries' peer
pointers was leaking.
Fixes: #12505
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Currently when an interface is deleted from configuration, associated
resources are not freed. This causes memory leaks and crashes.
To reproduce this issue:
* Connect to a DMVPN hub
* Outside of frr, delete the underlying GRE interface
* Use 'no interface xxx' to delete the interface containing nhrp configurations
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
When interface not present at config time, store separately the list of
config parameters. Then, when interface is ready and an address has been configured, the nbma setting is done. Reversely, when interface disappears,
there is no need to keep the maps present, then keep only the configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
nhrp_cache_update_route, nhrp_cache_authorize_binding: Fix route update for NAT scenario. When remote_nbma_natoa is already set in the cache entry, binding should be updated to this value and not vc remote nbma, which would be different from the NATted address.
nhrp_shortcut_recv_resolution_rep: Simplify the logic for finding the natoa nbma. Also, install shortcut entries as DYNAMIC type, as suggested in Section 6.2.2 of RFC2332.
nhrp_shortcut_cache_notify: announce the installed route with the correct interface from cache.
Signed-off-by: Ghasem Naddaf <gshirazi@infoblox.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
