Store a parsed and built graph of the CLI nodes in vtysh, rather than
parsing and building that graph every time vtysh starts up.
This provides a 3x to 5x reduction in vtysh startup overhead:
`vtysh -c 'configure' -c 'interface lo' -c 'do show version'`
- before: 92.9M cycles, 1114 samples
- after: 16.5M cycles, 330 samples
This improvement is particularly visible for users scripting `vtysh -c`
calls, which notably includes topotests.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If you had a situation where an operator turned on
ospfd with snmp but not ospf6d and agentx was configured
then you get into a situation where ospf6d would complain
that the config for agentx did not exist. Let's modify
the code to allow this situation to happen.
Fixes: #15896
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
ietf-key-chain depends on ietf-netconf-acm, and lib/ code sets up the
former, so ietf-netconf-acm needs to be embedded in the libfrr too.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is primarily intended for ldpd with its split-process architecture.
The LDE/LDPE subprocesses currently lose the extended zlog
functionality.
The zlog_live target already encapsulates all necessary bits for vtysh.
Reuse it for a relay function to be used in the main ldpd process.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a config that specifies per-deamon log file names.
Move the handy generated list of daemon names from vtysh to lib;
edit the gitignore files to match.
Signed-off-by: Mark Stapp <mjs@labn.net>
The only 2 places sendmmsg is used is in zlog_5424.c
and zlog_live.c. Why is the rest of the entire system
paying for this compilation?
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a library to deal with Flexible Algorithm that will be common to
IS-IS and OSPF. The functions enables to deal with:
- Affinity-maps
- Extended Admin Group (RFC7308)
- Flex-Algo structures that contains the flex-algo configurations
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
SR Algorithms are independent of specific IGPs
such as IS-IS. This commit adds lib/sr to
aggregate IGP agnostic functions and constants.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
- nice correspondence between new YANG grouping and shared library code.
- fixes bug with RIPNG use, certainly didn't work before.
- removes rip header from shared library code
- still has uses RIP_NODE/RIPNG_NODE as required by CLI foo.
Signed-off-by: Christian Hopps <chopps@labn.net>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit introduces the MGMT Backend Interface which can be used
by back-end management client daemons like BGPd, Staticd, Zebra to
connect with new FRR Management daemon (MGMTd) and utilize the new
FRR Management Framework to let any Frontend clients to retrieve any
operational data or manipulate any configuration data owned by the
individual Backend daemon component.
This commit includes the following functionalities in the changeset:
1. Add new Backend server for Backend daemons connect to.
2. Add a C-based Backend client library which can be used by daemons
to communicate with MGMTd via the Backend interface.
3. Maintain a backend adapter for each connection from an appropriate
Backend client to facilitate client requests and track one or more
transactions initiated from Frontend client sessions that involves
the backend client component.
4. Add the following commands to inspect various Backend client
related information
a. show mgmt backend-adapter all
b. show mgmt backend-yang-xpath-registry
c. show mgmt yang-xpath-subscription
Co-authored-by: Pushpasis Sarkar <pushpasis@gmail.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
This commit introduces the Frontend Interface which can be used
by front-end management clients like Netconf server, Restconf
Server and CLI to interact with new FRR Management daemon (MGMTd)
to access and sometimes modify FRR management data.
This commit includes the following functionalities in the changeset:
1. Add new Frontend server for clients connect to.
2. Add a C-based Frontend client library which can be used by Frontend
clients to communicate with MGMTd via the Frontend interface.
3. Maintain a frontend adapter for each connection from an appropriate
Frontend client to facilitate client requests and track one or more
client sessions across it.
4. Define the protobuf message format for messages to be exchanged
between MGMTd Frontend module and the Frontend client.
5. This changeset also introduces an instance of MGMT Frontend client
embedded within the lib/vty module that can be leveraged by any FRR
daemon to connect to MGMTd's Frontend interface. The same has been
integrated with and initialized within the MGMTd daemon's process
context to implement a bunch of 'set-config', 'commit-apply',
'get-config' and 'get-data' commands via VTYSH
Co-authored-by: Pushpasis Sarkar <pushpasis@gmail.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Like for IP addresses, this patch add a new format for printfrr collection to
print ISO System ID and Network address a.k.a IS-IS system ID & Network.
This new format is added to the library instead of isisd because other daemons
and tools need to print ISO System ID & Network Address.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add the support of Extended Admin-Group (RFC7308) to the zebra interface
link-params Traffic-Engineering context.
Extended admin-groups can be configured with the affinity-map:
> affinity-map blue bit-position 221
> int eth-rt1
> link-params
> affinity blue
> exit-link-params
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
AS number can be defined as an unsigned long number, or
two uint16 values separated by a period (.). The possible
valus are:
- usual 32 bit values : [1;2^32 -1]
- <1.65535>.<0.65535> for dot notation
- <0.65535>.<0.65535> for dot+ notation.
The 0.0 value is forbidden when configuring BGP instances
or peer configurations.
A new ASN type is added for parsing in the vty.
The following commands use that new identifier:
- router bgp ..
- bgp confederation ..
- neighbor <> remote-as <>
- neighbor <> local-as <>
- clear ip bgp <>
- route-map / set as-path <>
An asn library is available in lib/ and provides some
services:
- convert an as string into an as number.
- parse an as path list string and extract a number.
- convert an as number into a string.
Also, the bgp tests forge an as_zero_path, and to do that,
an API to relax the possibility to have a 0 as value is
specifically called from the tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the affinity-map global command to zebra. The syntax is:
> affinity-map NAME bit-position (0-1023)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When running the build in a separate build directory, redirecting output
into a file can error out if the directory does not exist yet. Some
places already had `mkdir -p` calls, but not all.
Make all occurences of this consistently use `@$(MKDIR_P)`.
(Extension of PR #12575 to catch more places.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This allows Zebra to manage QDISC, TCLASS, TFILTER in kernel and do cleaning
jobs when it starts up.
Signed-off-by: Siger Yang <siger.yang@outlook.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The format message checks done by clippy/xrelfo were still guarded
behind `--enable-dev-build`. They've been clean and reliable, so it's
time to enable them unconditionally.
Fixes: #11680
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
explicit_bzero() is available as an API to clean up sensitive data
and avoid compiler optimizations that remove calls to memset() or bzero().
Signed-off-by: Loganaden Velvindron <logan@cyberstorm.mu>
As helper function of Segment Routing Flex Algo or RSVP-TE
add Constrained Shortest Path First algorithm able to compute
path with constraints. Supported constraints are as follow:
- Standard IGP metric
- TE IGP metric
- Delay metric
- Bandwidth for given Class of Service for bandwidth reservation (RSVP-TE)
Usage of CSPF algorithms is detailed in the doc/developer/cspf.rst file
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Not much to say here, user docs are coming up in a separate commit.
RFC5424 and (systemd's) journald allow passing structured key-value
data. This stuffs the metadata we have available into there.
The "does the system syslogd support RFC5424" question is unfortunately
not easily answered, so we can only give an affirmative answer on NetBSD
5.0+ or FreeBSD 12+.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
