It's possible to specify via the cli and configure how many
nexthops that are allowed on the system. If you happen to
have > 255 then things are about to get interesting otherwise.
Let's allow up to 65k nexthops (ha!)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A memory leak is detected when stopping the sharpd daemon
with a nexthop group configuration that includes nexthops.
The nexthop_hold structure and its attributes are not
freed. Fix it by adding the missing free function.
Fixes: 98cbbaea91 ("lib: Handle if up/down and vrf enable/disable events")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
No need to declare 'nexthop_group_nexthop_num_no_recurse()' as external.
Fixes: 98cda54a95 ("zebra: Add recursive functionality to NHE's")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When stopping a VRF, the linked list entries must be
removed too.
Fixes: 98cbbaea91 ("lib: Handle if up/down and vrf enable/disable events")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The nexthop_group_active_nexthop_num_no_recurse() function is no more
used. Let us remove the function call.
Fixes: 148813c22a ("zebra: zebra_nhg check each nexthop for active, not just number")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add the ability for sharpd to install vni labels for testing.
This patch is just for testing/dev work purposes with evpn.
It adds some code to vty for nexthop-groups so we can explicitly
add a label to nexthops and then let sharpd encode them to zebra.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add a function nexthop_group_has_label() for determining
if even a single nexthop in the group has a label on it.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This patch just introduces the callback mechanism for the
resilient nexthop changes so that upper level daemons
can take advantage of the change. This does nothing
at this point but just call some code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The fact that the interface name is used in some nexthop config doesn't
mean that the interface is configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Remove the nexthop_same_firsthop() api and just call nexthop_same().
Not entirely sure why we were using this function in the first place,
but now we are just marking dupes with it so lets just call a
common function and avoid issues.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command `set installable` that allows configured nexthop
groups to be treated as separate/installable objects in the RIB.
A callback needs to be implemented per daemon to handle installing
the NHG into the rib via zapi when this command is set. This
patch includes the implementation for sharpd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If we have an interface configured in a daemon on shutdown
store the old ifindex value for retrieval on when it is
possibly recreated.
This is especially important for nexthop groups as that we
had at one point in time the ability to restore the
configuration but it was lost when we started deleting
all deleted interfaces. We need the nexthop group subsystem
to also mark that it has configured an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nexthop_group_write_nexthop_simple function outputs the
interface name, because we've stored the ifindex. The problem
is that there are ephermeal interfaces in linux that can be
destroyed/recreated. Allow us to keep that data and do something
a bit smarter to allow show run's and other show commands to continue
to work when the interface is deleted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Not everything cares about the vrf and backup info. Break
up the API to add a simple version to just write gateway/interface
info.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix a crash where if we issue a show run after a vrf has been
deleted we would crash here due to not null checking.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Initial changes to support a nexthop with multiple backups. Lib
changes to hold a small array in each primary, zapi message
changes to support sending multiple backups, and daemon
changes to show commands to support multiple backups. The config
input for multiple backup indices is not present here.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Revise new `show pbr` keys to be consistent with existing
json in other daemons
target->nexthop
id->tableId (where relevant)
isValid->valid
isInstalled->installed
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Increased the verbosity of the json keys and flattened the returned
structure by removing superfluous keys.
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Use more limited matching logic so that nexthops within a
nexthop-group are unique based only on vrf, type, and gateway.
Treat configuration of a nexthop that matches an existing
nexthop as a replace operation.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If someone tries to add a nexthop with a list of nexthops
already attached to it, let's just assert. This standardizes
the API to say we assume this is an individual nexthop
you are appending to a group.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the nexthop_copy/nexthop_dup APIs more consistent by
adding a secondary, non-recursive, version of them. Before,
it was inconsistent whether the APIs were expected to copy
recursive info or not. Make it clear now that the default is
recursive info is copied unless the _no_recurse() version is
called. These APIs are not heavily used so it is fine to
change them for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
