matthieu/frr
1
0
Fork 0
forked from Mirror/frr
Code Pull requests Activity

Merge pull request #8100 from qlyoung/remove-sample-conf-files

Browse source
This commit is contained in:
David Lamparter 2021-04-13 02:20:53 +02:00 committed by GitHub
parent 0e8c4c1c36 6c8bdfd569
commit 9c2a14e753
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
55 changed files with 325 additions and 579 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
babeld/.gitignore vendored
View file

@ -4,5 +4,4 @@
!LICENCE
!Makefile
!subdir.am
!babeld.conf.sample
!.gitignore

30
babeld/babeld.conf.sample
View file

@ -1,30 +0,0 @@
debug babel common
!debug babel kernel
!debug babel filter
!debug babel timeout
!debug babel interface
!debug babel route
!debug babel all
router babel
! network wlan0
! network eth0
! redistribute ipv4 kernel
! no redistribute ipv6 static
! The defaults are fine for a wireless interface
!interface wlan0
! A few optimisation tweaks are optional but recommended on a wired interface
! Disable link quality estimation, enable split horizon processing, and
! increase the hello and update intervals.
!interface eth0
! babel wired
! babel split-horizon
! babel hello-interval 12000
! babel update-interval 36000
! log file /var/log/quagga/babeld.log
log stdout

1
babeld/subdir.am
View file

@ -5,7 +5,6 @@
if BABELD
noinst_LIBRARIES += babeld/libbabel.a
sbin_PROGRAMS += babeld/babeld
dist_examples_DATA += babeld/babeld.conf.sample
vtysh_scan += \
babeld/babel_interface.c \
babeld/babel_zebra.c \

5
bfdd/bfdd.conf.sample
View file

@ -1,5 +0,0 @@
password zebra
!
log stdout
!
line vty

1
bfdd/subdir.am
View file

@ -5,7 +5,6 @@
if BFDD
noinst_LIBRARIES += bfdd/libbfd.a
sbin_PROGRAMS += bfdd/bfdd
dist_examples_DATA += bfdd/bfdd.conf.sample
vtysh_scan += bfdd/bfdd_vty.c
vtysh_scan += bfdd/bfdd_cli.c
vtysh_daemons += bfdd

31
bgpd/bgpd.conf.sample
View file

@ -1,31 +0,0 @@
! -*- bgp -*-
!
! BGPd sample configuration file
!
! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
!
hostname bgpd
password zebra
!enable password please-set-at-here
!
!
router bgp 7675
! bgp router-id 10.0.0.1
! network 10.0.0.0/8
! neighbor 10.0.0.2 remote-as 7675
! neighbor 10.0.0.2 ebgp-multihop
!
! address-family ipv4 unicast
! neighbor 10.0.0.2 route-map set-nexthop out
! neighbor 10.0.0.2 next-hop-self
! exit-address-family
!
! access-list all permit any
!
!route-map set-nexthop permit 10
! match ip address all
! set ip next-hop 10.0.0.1
!
!log file bgpd.log
!
log stdout

91
bgpd/bgpd.conf.vnc.sample
View file

@ -1,91 +0,0 @@
hostname H192.1.1.1
password zebra
#enable password zebra
log stdout notifications
log monitor notifications
#debug bgp
line vty
exec-timeout 1000
exit
router bgp 64512
# Must set a router-id if no zebra (default 0.0.0.0)
bgp router-id 192.1.1.1
neighbor 192.1.1.2 remote-as 64512
neighbor 192.1.1.2 description H192.1.1.2
neighbor 192.1.1.2 update-source 192.1.1.1
neighbor 192.1.1.2 advertisement-interval 1
neighbor 192.1.1.3 remote-as 64512
neighbor 192.1.1.3 description H192.1.1.3
neighbor 192.1.1.3 update-source 192.1.1.1
neighbor 192.1.1.3 advertisement-interval 1
address-family ipv4 unicast
no neighbor 192.1.1.2 activate
no neighbor 192.1.1.3 activate
address-family vpnv4
neighbor 192.1.1.2 activate
neighbor 192.1.1.3 activate
exit-address-family
address-family vpnv6
neighbor 192.1.1.2 activate
neighbor 192.1.1.3 activate
exit-address-family
vnc defaults
rd auto:vn:5226
response-lifetime 45
rt both 1000:1 1000:2
exit-vnc
vnc nve-group group1
prefix vn 172.16.0.0/16
exit-vnc
vnc nve-group red
prefix vn 10.0.0.0/8
rd auto:vn:10
rt both 1000:10
exit-vnc
vnc nve-group blue
prefix vn 20.0.0.0/8
rd auto:vn:20
rt both 1000:20
exit-vnc
vnc nve-group green
prefix vn 30.0.0.0/8
rd auto:vn:20
rt both 1000:30
exit-vnc
vnc nve-group rfc4291v6c
prefix vn ::ac10:0/112
rd auto:vn:5227
rt both 2000:1
exit-vnc
vnc nve-group rfc4291v6m
prefix vn ::ffff:ac10:0/112
rd auto:vn:5528
rt both 3000:1
exit-vnc
vnc nve-group rfc6052v6
prefix vn 64:ff9b::ac10:0/112
rd auto:vn:5529
rt both 4000:1
exit-vnc
exit

5
bgpd/subdir.am
View file

@ -6,11 +6,6 @@ if BGPD
noinst_LIBRARIES += bgpd/libbgp.a
sbin_PROGRAMS += bgpd/bgpd
noinst_PROGRAMS += bgpd/bgp_btoa
dist_examples_DATA += \
bgpd/bgpd.conf.sample \
bgpd/bgpd.conf.sample2 \
bgpd/bgpd.conf.vnc.sample \
# end
vtysh_scan += \
bgpd/bgp_bfd.c \
bgpd/bgp_debug.c \

1
debian/frr.dirs vendored
View file

@ -2,7 +2,6 @@ etc/frr/
etc/iproute2/rt_protos.d/
etc/logrotate.d/
usr/share/doc/frr/
usr/share/doc/frr/examples/
usr/share/lintian/overrides/
usr/share/yang/
var/log/frr/

2
debian/frr.install vendored
View file

@ -1,5 +1,6 @@
debian/frr.conf usr/lib/tmpfiles.d
etc/
tools/etc/frr/frr.conf etc/frr/
tools/frr-reload usr/lib/frr/
usr/bin/mtracebis
usr/bin/vtysh
@ -16,6 +17,5 @@ usr/lib/frr/*.sh
usr/lib/frr/*d
usr/lib/frr/watchfrr
usr/lib/frr/zebra
usr/share/doc/frr/examples
usr/share/man/
usr/share/yang/

3
debian/rules vendored
View file

@ -43,7 +43,6 @@ export PYTHON=python3
override_dh_auto_configure:
$(shell dpkg-buildflags --export=sh); \
dh_auto_configure -- \
--enable-exampledir=/usr/share/doc/frr/examples/ \
--localstatedir=/var/run/frr \
--sbindir=/usr/lib/frr \
--sysconfdir=/etc/frr \
@ -92,8 +91,6 @@ endif
cp -r tools/etc/* debian/tmp/etc/
-rm debian/tmp/etc/frr/daemons.conf
sed -e 's#^!log file #!log file /var/log/frr/#' -i debian/tmp/usr/share/doc/frr/examples/*sample*
# drop dev-only files
find debian/tmp -name '*.la' -o -name '*.a' -o -name 'lib*.so' | xargs rm -f
rm -rf debian/tmp/usr/include

2
doc/developer/building-frr-for-alpine.rst
View file

@ -85,8 +85,6 @@ startup. To configure by hand:
docker exec -it frr /bin/sh
vi /etc/frr/daemons
cp /etc/frr/zebra.conf.sample /etc/frr/zebra.conf
vi /etc/frr/zebra.conf
/etc/init.d/frr start
Or, to configure the daemons using /etc/frr from a host volume, put the

38
doc/user/babeld.rst
View file

@ -233,3 +233,41 @@ Babel debugging commands
.. note::
If you have compiled with the ``NO_DEBUG`` flag, then these commands aren't
available.
Babel sample configuration file
===============================
.. code-block:: frr
debug babel common
!debug babel kernel
!debug babel filter
!debug babel timeout
!debug babel interface
!debug babel route
!debug babel all
router babel
! network wlan0
! network eth0
! redistribute ipv4 kernel
! no redistribute ipv6 static
! The defaults are fine for a wireless interface
!interface wlan0
! A few optimisation tweaks are optional but recommended on a wired interface
! Disable link quality estimation, enable split horizon processing, and
! increase the hello and update intervals.
!interface eth0
! babel wired
! babel split-horizon
! babel hello-interval 12000
! babel update-interval 36000
! log file /var/log/quagga/babeld.log
log stdout

15
doc/user/eigrpd.rst
View file

@ -183,3 +183,18 @@ Debug for EIGRP protocol.
``show debugging eigrp`` will show all information currently set for eigrpd
debug.
Sample configuration
====================
.. code-block:: frr
hostname eigrpd
password zebra
enable password please-set-at-here
!
router eigrp 4453
network 192.168.1.0/24
!
log stdout

29
doc/user/fabricd.rst
View file

@ -60,7 +60,6 @@ in the configuration:
.. clicmd:: set-overload-bit
Set overload bit to avoid any transit traffic.
.. clicmd:: purge-originator
@ -256,9 +255,8 @@ Debugging OpenFabric
Print which OpenFabric debug levels are active.
OpenFabric configuration example
================================
Sample configuration
====================
A simple example:
@ -281,3 +279,26 @@ A simple example:
!
router openfabric 1
net 49.0000.0000.0001.00
Alternative example:
.. code-block:: frr
hostname fabricd
router openfabric DEAD
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
lsp-lifetime 65535
hostname isisd-router
domain-password foobar
interface eth0
ip router openfabric DEAD
openfabric hello-interval 5
openfabric lsp-interval 1000
! -- optional
openfabric retransmit-interval 10
openfabric retransmit-throttle-interval

47
doc/user/ldpd.rst
View file

@ -242,8 +242,9 @@ LDP debugging commands
- ``messages``
- ``zebra``
LDP Example Configuration
=========================
Sample configuration
====================
Below configuration gives a typical MPLS configuration of a device located in a
MPLS backbone. LDP is enabled on two interfaces and will attempt to peer with
@ -306,3 +307,45 @@ that traffic to that destination will be applied.
O>* 10.200.0.0/24 [110/210] via 10.115.0.1, eth2, label 17, 00:00:15
north-vm#
Additional example demonstrating use of some miscellaneous config options:
.. code-block:: frr
interface eth0
!
interface eth1
!
interface lo
!
mpls ldp
dual-stack cisco-interop
neighbor 10.0.1.5 password opensourcerouting
neighbor 172.16.0.1 password opensourcerouting
!
address-family ipv4
discovery transport-address 10.0.1.1
label local advertise explicit-null
!
interface eth0
!
interface eth1
!
!
address-family ipv6
discovery transport-address 2001:db8::1
!
interface eth1
!
!
!
l2vpn ENG type vpls
bridge br0
member interface eth2
!
member pseudowire mpw0
neighbor lsr-id 1.1.1.1
pw-id 100
!
!

55
doc/user/ospf6d.rst
View file

@ -243,8 +243,9 @@ Showing OSPF6 information
JSON object, with each router having "cost", "isLeafNode" and "children" as
arguments.
OSPF6 Configuration Examples
============================
Sample configuration
====================
Example of ospf6d configured on one interface and area:
@ -258,3 +259,53 @@ Example of ospf6d configured on one interface and area:
area 0.0.0.0 range 2001:770:105:2::/64
interface eth0 area 0.0.0.0
!
Larger example with policy and various options set:
.. code-block:: frr
debug ospf6 neighbor state
!
interface fxp0
ipv6 ospf6 cost 1
ipv6 ospf6 hello-interval 10
ipv6 ospf6 dead-interval 40
ipv6 ospf6 retransmit-interval 5
ipv6 ospf6 priority 0
ipv6 ospf6 transmit-delay 1
ipv6 ospf6 instance-id 0
!
interface lo0
ipv6 ospf6 cost 1
ipv6 ospf6 hello-interval 10
ipv6 ospf6 dead-interval 40
ipv6 ospf6 retransmit-interval 5
ipv6 ospf6 priority 1
ipv6 ospf6 transmit-delay 1
ipv6 ospf6 instance-id 0
!
router ospf6
router-id 255.1.1.1
redistribute static route-map static-ospf6
interface fxp0 area 0.0.0.0
!
access-list access4 permit 127.0.0.1/32
!
ipv6 access-list access6 permit 3ffe:501::/32
ipv6 access-list access6 permit 2001:200::/48
ipv6 access-list access6 permit ::1/128
!
ipv6 prefix-list test-prefix seq 1000 deny any
!
route-map static-ospf6 permit 10
match ipv6 address prefix-list test-prefix
set metric-type type-2
set metric 2000
!
line vty
access-class access4
ipv6 access-class access6
exec-timeout 0 0
!

7
doc/user/ospfd.rst
View file

@ -280,7 +280,7 @@ To start OSPF process you have to specify the OSPF router.
This command enables or disables sending ARP requests to update neighbor
table entries. It speeds up convergence for /32 networks on a P2P
connection.
connection.
This feature is enabled by default.
@ -1089,8 +1089,9 @@ Debugging OSPF
Debug commnd to enable/disable external route summarisation specific debugs.
OSPF Configuration Examples
===========================
Sample Configuration
====================
A simple example, with MD5 authentication enabled:

49
doc/user/pathd.rst
View file

@ -395,3 +395,52 @@ learned through BGP using route-maps:
!
In this case, the SR Policy with color `1` and endpoint `1.1.1.1` is selected.
Sample configuration
====================
.. code-block:: frr
! Default pathd configuration sample
!
password frr
log stdout
segment-routing
traffic-eng
segment-list test1
index 10 mpls label 123
index 20 mpls label 456
!
segment-list test2
index 10 mpls label 321
index 20 mpls label 654
!
policy color 1 endpoint 1.1.1.1
name one
binding-sid 100
candidate-path preference 100 name test1 explicit segment-list test1
candidate-path preference 200 name test2 explicit segment-list test2
!
policy color 2 endpoint 2.2.2.2
name two
binding-sid 101
candidate-path preference 100 name def explicit segment-list test2
candidate-path preference 200 name dyn dynamic
bandwidth 12345
metric bound abc 16 required
metric te 10
!
!
pcep
pcc-peer PCE1
address ip 127.0.0.1
sr-draft07
!
pcc
peer PCE1
!
!
!

19
doc/user/pbr.rst
View file

@ -290,3 +290,22 @@ kernel that points to a table to use for forwarding once the rule matches.
The creation of a nexthop or nexthop-group is translated to a default route in a
table with the nexthops specified as the nexthops for the default route.
Sample configuration
====================
.. code-block:: frr
nexthop-group TEST
nexthop 4.5.6.7
nexthop 5.6.7.8
!
pbr-map BLUE seq 100
match dst-ip 9.9.9.0/24
match src-ip 10.10.10.0/24
set nexthop-group TEST
!
int swp1
pbr-policy BLUE

31
doc/user/pim.rst
View file

@ -656,3 +656,34 @@ setup. This is existing PIM configuration:
- Enable pim on the underlay L3 interface via the "ip pim" command.
- Configure RPs for the BUM multicast group range.
- Ensure the PIM is enabled on the lo of the VTEPs and the RP.
Sample configuration
====================
.. code-block:: frr
debug igmp
debug pim
debug pim zebra
! You may want to enable ssmpingd for troubleshooting
! See http://www.venaas.no/multicast/ssmping/
!
ip ssmpingd 1.1.1.1
ip ssmpingd 2.2.2.2
! HINTS:
! - Enable "ip pim ssm" on the interface directly attached to the
! multicast source host (if this is the first-hop router)
! - Enable "ip pim ssm" on pim-routers-facing interfaces
! - Enable "ip igmp" on IGMPv3-hosts-facing interfaces
! - In order to inject IGMPv3 local membership information in the
! PIM protocol state, enable both "ip pim ssm" and "ip igmp" on
! the same interface; otherwise PIM won't advertise
! IGMPv3-learned membership to other PIM routers
interface eth0
ip pim ssm
ip igmp

18
doc/user/ripd.rst
View file

@ -539,3 +539,21 @@ Debug for RIP protocol.
Shows all information currently set for ripd debug.
Sample configuration
====================
.. code-block:: frr
debug rip events
debug rip packet
router rip
network 11.0.0.0/8
network eth0
route 10.0.0.0/8
distribute-list private-only in eth0
access-list private-only permit 10.0.0.0/8
access-list private-only deny any

16
doc/user/ripngd.rst
View file

@ -71,3 +71,19 @@ ripngd Filtering Commands
distribute-list local-only out sit1
Sample configuration
====================
.. code-block:: frr
debug ripng events
debug ripng packet
router ripng
network sit1
route 3ffe:506::0/32
distribute-list local-only out sit1
ipv6 access-list local-only permit 3ffe:506::0/32
ipv6 access-list local-only deny any

13
eigrpd/eigrpd.conf.sample
View file

@ -1,13 +0,0 @@
! -*- eigrpd -*-
!
! EIGRPDd sample configuration file
!
!
hostname eigrpd
password zebra
!enable password please-set-at-here
!
!router eigrp 4453
! network 192.168.1.0/24
!
log stdout

1
eigrpd/subdir.am
View file

@ -5,7 +5,6 @@
if EIGRPD
noinst_LIBRARIES += eigrpd/libeigrp.a
sbin_PROGRAMS += eigrpd/eigrpd
dist_examples_DATA += eigrpd/eigrpd.conf.sample
vtysh_scan += \
eigrpd/eigrp_cli.c \
eigrpd/eigrp_dump.c \

27
isisd/fabricd.conf.sample
View file

@ -1,27 +0,0 @@
! -*- openfabric -*-
!
! fabricd sample configuration file
!
hostname fabricd
password foo
enable password foo
log stdout
!log file /tmp/fabricd.log
!
!
router openfabric DEAD
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
! lsp-lifetime 65535
! hostname isisd-router
! domain-password foobar
interface eth0
ip router openfabric DEAD
! openfabric hello-interval 5
! openfabric lsp-interval 1000
! -- optional
! openfabric retransmit-interval 10
! openfabric retransmit-throttle-interval
!

39
isisd/isisd.conf.sample
View file

@ -1,39 +0,0 @@
! -*- isis -*-
!
! ISISd sample configuration file
!
hostname isisd
password foo
enable password foo
log stdout
!log file /tmp/isisd.log
!
!
router isis DEAD
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
! is-type level-1
! -- set the lifetime either for level-1, level-2 or both
! lsp-lifetime level-1 65535
! lsp-lifetime level-2 65535
! lsp-lifetime 65535
! hostname isisd-router
! area-password foobar
! domain-password foobar
interface eth0
ip router isis DEAD
! isis hello-interval 5
! isis lsp-interval 1000
! -- optional
! isis circuit-type level-1
! isis password lallaa level-1
! isis metric 1 level-1
! isis csnp-interval 5 level-1
! isis retransmit-interval 10
! isis retransmit-throttle-interval
! isis hello-multiplier 2 level-1
! isis priority 64
!

2
isisd/subdir.am
View file

@ -5,7 +5,6 @@
if ISISD
noinst_LIBRARIES += isisd/libisis.a
sbin_PROGRAMS += isisd/isisd
dist_examples_DATA += isisd/isisd.conf.sample
vtysh_scan += \
isisd/isis_cli.c \
isisd/isis_ldp_sync.c \
@ -26,7 +25,6 @@ endif
if FABRICD
noinst_LIBRARIES += isisd/libfabric.a
sbin_PROGRAMS += isisd/fabricd
dist_examples_DATA += isisd/fabricd.conf.sample
if !ISISD
vtysh_scan += \
isisd/isis_cli.c \

46
ldpd/ldpd.conf.sample
View file

@ -1,46 +0,0 @@
! -*- ldp -*-
!
! LDPd sample configuration file
!
hostname ldpd
password zebra
log stdout
!
interface eth0
!
interface eth1
!
interface lo
!
mpls ldp
dual-stack cisco-interop
neighbor 10.0.1.5 password opensourcerouting
neighbor 172.16.0.1 password opensourcerouting
!
address-family ipv4
discovery transport-address 10.0.1.1
label local advertise explicit-null
!
interface eth0
!
interface eth1
!
!
address-family ipv6
discovery transport-address 2001:db8::1
!
interface eth1
!
!
!
l2vpn ENG type vpls
bridge br0
member interface eth2
!
member pseudowire mpw0
neighbor lsr-id 1.1.1.1
pw-id 100
!
!
line vty
!

1
ldpd/subdir.am
View file

@ -5,7 +5,6 @@
if LDPD
noinst_LIBRARIES += ldpd/libldp.a
sbin_PROGRAMS += ldpd/ldpd
dist_examples_DATA += ldpd/ldpd.conf.sample
vtysh_scan += ldpd/ldp_vty_cmds.c
vtysh_daemons += ldpd
man8 += $(MANBUILD)/frr-ldpd.8

52
ospf6d/ospf6d.conf.sample
View file

@ -1,52 +0,0 @@
!
! Zebra configuration saved from vty
! 2003/11/28 00:49:49
!
hostname ospf6d@plant
password zebra
log stdout
service advanced-vty
!
debug ospf6 neighbor state
!
interface fxp0
ipv6 ospf6 cost 1
ipv6 ospf6 hello-interval 10
ipv6 ospf6 dead-interval 40
ipv6 ospf6 retransmit-interval 5
ipv6 ospf6 priority 0
ipv6 ospf6 transmit-delay 1
ipv6 ospf6 instance-id 0
!
interface lo0
ipv6 ospf6 cost 1
ipv6 ospf6 hello-interval 10
ipv6 ospf6 dead-interval 40
ipv6 ospf6 retransmit-interval 5
ipv6 ospf6 priority 1
ipv6 ospf6 transmit-delay 1
ipv6 ospf6 instance-id 0
!
router ospf6
router-id 255.1.1.1
redistribute static route-map static-ospf6
interface fxp0 area 0.0.0.0
!
access-list access4 permit 127.0.0.1/32
!
ipv6 access-list access6 permit 3ffe:501::/32
ipv6 access-list access6 permit 2001:200::/48
ipv6 access-list access6 permit ::1/128
!
ipv6 prefix-list test-prefix seq 1000 deny any
!
route-map static-ospf6 permit 10
match ipv6 address prefix-list test-prefix
set metric-type type-2
set metric 2000
!
line vty
access-class access4
ipv6 access-class access6
exec-timeout 0 0
!

1
ospf6d/subdir.am
View file

@ -5,7 +5,6 @@
if OSPF6D
noinst_LIBRARIES += ospf6d/libospf6.a
sbin_PROGRAMS += ospf6d/ospf6d
dist_examples_DATA += ospf6d/ospf6d.conf.sample
vtysh_scan += \
ospf6d/ospf6_abr.c \
ospf6d/ospf6_asbr.c \

13
ospfd/ospfd.conf.sample
View file

@ -1,13 +0,0 @@
! -*- ospf -*-
!
! OSPFd sample configuration file
!
!
hostname ospfd
password zebra
!enable password please-set-at-here
!
!router ospf
! network 192.168.1.0/24 area 0
!
log stdout

1
ospfd/subdir.am
View file

@ -5,7 +5,6 @@
if OSPFD
noinst_LIBRARIES += ospfd/libfrrospf.a
sbin_PROGRAMS += ospfd/ospfd
dist_examples_DATA += ospfd/ospfd.conf.sample
vtysh_scan += \
ospfd/ospf_bfd.c \
ospfd/ospf_dump.c \

41
pathd/pathd.conf.sample
View file

@ -1,41 +0,0 @@
! Default pathd configuration sample
!
password frr
log stdout
segment-routing
traffic-eng
segment-list test1
index 10 mpls label 123
index 20 mpls label 456
!
segment-list test2
index 10 mpls label 321
index 20 mpls label 654
!
policy color 1 endpoint 1.1.1.1
name one
binding-sid 100
candidate-path preference 100 name test1 explicit segment-list test1
candidate-path preference 200 name test2 explicit segment-list test2
!
policy color 2 endpoint 2.2.2.2
name two
binding-sid 101
candidate-path preference 100 name def explicit segment-list test2
candidate-path preference 200 name dyn dynamic
bandwidth 12345
metric bound abc 16 required
metric te 10
!
!
pcep
pcc-peer PCE1
address ip 127.0.0.1
sr-draft07
!
pcc
peer PCE1
!
!
!

1
pathd/subdir.am
View file

@ -5,7 +5,6 @@
if PATHD
noinst_LIBRARIES += pathd/libpath.a
sbin_PROGRAMS += pathd/pathd
dist_examples_DATA += pathd/pathd.conf.sample
vtysh_scan += $(top_srcdir)/pathd/path_cli.c
vtysh_daemons += pathd
# TODO add man page

19
pbrd/pbrd.conf.sample
View file

@ -1,19 +0,0 @@
! Sample pbrd configuration file
!
! A quick example of what a pbr configuration might look like
!
!
log stdout
!
! nexthop-group TEST
! nexthop 4.5.6.7
! nexthop 5.6.7.8
! !
! pbr-map BLUE seq 100
! match dst-ip 9.9.9.0/24
! match src-ip 10.10.10.0/24
! set nexthop-group TEST
! !
! int swp1
! pbr-policy BLUE
!

1
pbrd/subdir.am
View file

@ -5,7 +5,6 @@
if PBRD
noinst_LIBRARIES += pbrd/libpbr.a
sbin_PROGRAMS += pbrd/pbrd
dist_examples_DATA += pbrd/pbrd.conf.sample
vtysh_scan += \
pbrd/pbr_vty.c \
pbrd/pbr_debug.c \

40
pimd/pimd.conf.sample
View file

@ -1,40 +0,0 @@
!
! pimd sample configuration file
!
hostname quagga-pimd-router
password zebra
!enable password zebra
!
!log file pimd.log
log stdout
!
line vty
exec-timeout 60
!
!debug igmp
!debug pim
!debug pim zebra
!
ip multicast-routing
!
! ! You may want to enable ssmpingd for troubleshooting
! ! See http://www.venaas.no/multicast/ssmping/
! !
! ip ssmpingd 1.1.1.1
! ip ssmpingd 2.2.2.2
!
! ! HINTS:
! ! - Enable "ip pim ssm" on the interface directly attached to the
! ! multicast source host (if this is the first-hop router)
! ! - Enable "ip pim ssm" on pim-routers-facing interfaces
! ! - Enable "ip igmp" on IGMPv3-hosts-facing interfaces
! ! - In order to inject IGMPv3 local membership information in the
! ! PIM protocol state, enable both "ip pim ssm" and "ip igmp" on
! ! the same interface; otherwise PIM won't advertise
! ! IGMPv3-learned membership to other PIM routers
!
interface eth0
ip pim ssm
ip igmp
! -x-

1
pimd/subdir.am
View file

@ -7,7 +7,6 @@ noinst_LIBRARIES += pimd/libpim.a
sbin_PROGRAMS += pimd/pimd
bin_PROGRAMS += pimd/mtracebis
noinst_PROGRAMS += pimd/test_igmpv3_join
dist_examples_DATA += pimd/pimd.conf.sample
vtysh_scan += pimd/pim_cmd.c
vtysh_daemons += pimd
man8 += $(MANBUILD)/frr-pimd.8

6
redhat/frr.spec.in
View file

@ -456,6 +456,7 @@ ln -s %{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr
%endif
install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr
install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr
install -m644 %{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d/frr
install -m644 %{zeb_rh_src}/frr.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/frr
install -d -m750 %{buildroot}%{rundir}
@ -641,7 +642,7 @@ fi
%files
%doc */*.sample* COPYING
%doc COPYING
%doc doc/mpls
%doc README.md
/usr/share/yang/*.yang
@ -654,9 +655,6 @@ fi
%dir %attr(750,root,root) %{_localstatedir}/log/frr
%dir %attr(750,root,root) %{rundir}
%endif
%if 0%{?vty_group:1}
%attr(750,%{frr_user},%{vty_group}) %{configdir}/vtysh.conf.sample
%endif
%{_infodir}/frr.info.gz
%{_mandir}/man*/*
%{_sbindir}/zebra

22
ripd/ripd.conf.sample
View file

@ -1,22 +0,0 @@
! -*- rip -*-
!
! RIPd sample configuration file
!
hostname ripd
password zebra
!
! debug rip events
! debug rip packet
!
router rip
! network 11.0.0.0/8
! network eth0
! route 10.0.0.0/8
! distribute-list private-only in eth0
!
!access-list private-only permit 10.0.0.0/8
!access-list private-only deny any
!
!log file ripd.log
!
log stdout

1
ripd/subdir.am
View file

@ -5,7 +5,6 @@
if RIPD
noinst_LIBRARIES += ripd/librip.a
sbin_PROGRAMS += ripd/ripd
dist_examples_DATA += ripd/ripd.conf.sample
vtysh_scan += \
ripd/rip_cli.c \
ripd/rip_debug.c \

20
ripngd/ripngd.conf.sample
View file

@ -1,20 +0,0 @@
! -*- rip -*-
!
! RIPngd sample configuration file
!
hostname ripngd
password zebra
!
! debug ripng events
! debug ripng packet
!
!
router ripng
! network sit1
! route 3ffe:506::0/32
! distribute-list local-only out sit1
!
!ipv6 access-list local-only permit 3ffe:506::0/32
!ipv6 access-list local-only deny any
!
log stdout

2
ripngd/subdir.am
View file

@ -50,5 +50,3 @@ ripngd_ripngd_SOURCES = \
nodist_ripngd_ripngd_SOURCES = \
yang/frr-ripngd.yang.c \
# end
dist_examples_DATA += ripngd/ripngd.conf.sample

6
sharpd/sharpd.conf.sample
View file

@ -1,6 +0,0 @@
! Default sharpd configuration sample
!
! There are no `default` configuration commands for sharpd
! all commands are at the view or enable level.
!
log stdout

1
sharpd/subdir.am
View file

@ -5,7 +5,6 @@
if SHARPD
noinst_LIBRARIES += sharpd/libsharp.a
sbin_PROGRAMS += sharpd/sharpd
dist_examples_DATA += sharpd/sharpd.conf.sample
vtysh_scan += sharpd/sharp_vty.c
vtysh_daemons += sharpd
man8 += $(MANBUILD)/frr-sharpd.8

5
staticd/staticd.conf.sample
View file

@ -1,5 +0,0 @@
! Default staticd configuration sample
!
log stdout
!
! ip route 4.5.6.7/32 10.10.10.10

1
staticd/subdir.am
View file

@ -5,7 +5,6 @@
if STATICD
noinst_LIBRARIES += staticd/libstatic.a
sbin_PROGRAMS += staticd/staticd
dist_examples_DATA += staticd/staticd.conf.sample
vtysh_scan += staticd/static_vty.c
vtysh_daemons += staticd
man8 += $(MANBUILD)/frr-staticd.8

11
tools/etc/frr/frr.conf
View file

@ -1,3 +1,10 @@
# default to using syslog. /etc/rsyslog.d/45-frr.conf places the log
# in /var/log/frr/frr.log
# default to using syslog. /etc/rsyslog.d/45-frr.conf places the log in
# /var/log/frr/frr.log
#
# Note:
# FRR's configuration shell, vtysh, dynamically edits the live, in-memory
# configuration while FRR is running. When instructed, vtysh will persist the
# live configuration to this file, overwriting its contents. If you want to
# avoid this, you can edit this file manually before starting FRR, or instruct
# vtysh to write configuration to a different file.
log syslog informational

1
vrrpd/subdir.am
View file

@ -5,7 +5,6 @@
if VRRPD
noinst_LIBRARIES += vrrpd/libvrrp.a
sbin_PROGRAMS += vrrpd/vrrpd
# dist_examples_DATA += staticd/staticd.conf.sample
vtysh_scan += vrrpd/vrrp_vty.c
vtysh_daemons += vrrpd
man8 += $(MANBUILD)/frr-vrrpd.8

1
vtysh/subdir.am
View file

@ -4,7 +4,6 @@
if VTYSH
bin_PROGRAMS += vtysh/vtysh
dist_examples_DATA += vtysh/vtysh.conf.sample
man1 += $(MANBUILD)/vtysh.1
endif

7
vtysh/vtysh.conf.sample
View file

@ -1,7 +0,0 @@
!
! Sample configuration file for vtysh.
!
!service integrated-vtysh-config
!hostname quagga-router
!username root nopassword
!

1
zebra/subdir.am
View file

@ -4,7 +4,6 @@
if ZEBRA
sbin_PROGRAMS += zebra/zebra
dist_examples_DATA += zebra/zebra.conf.sample
vtysh_scan += \
zebra/debug.c \
zebra/interface.c \

23
zebra/zebra.conf.sample
View file

@ -1,23 +0,0 @@
! -*- zebra -*-
!
! zebra sample configuration file
!
hostname Router
password zebra
enable password zebra
!
! Interface's description.
!
!interface lo
! description test of desc.
!
!interface sit0
! multicast
!
! Static default route sample.
!
!ip route 0.0.0.0/0 203.181.89.241
!
!log file zebra.log