matthieu/frr
1
0
Fork 0
forked from Mirror/frr
Code Pull requests Activity

Merge pull request #5138 from ghasemnaddaf/vrrp_updates

Browse source 
doc: minor updates to vrrp doc
This commit is contained in:
Quentin Young 2019-10-11 12:04:32 -04:00 committed by GitHub
parent adca8385ae 803a4db6ff
commit 09ea1a4038
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 11 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
doc/user/vrrp.rst
View file

@ -108,7 +108,7 @@ Suppose you have an interface ``eth0`` with the following configuration:
.. code-block:: console
$ ip link show eth0
$ ip addr show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 02:17:45:00:aa:aa brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic eth0
@ -118,9 +118,10 @@ Suppose you have an interface ``eth0`` with the following configuration:
inet6 fe80::17:45ff:fe00:aaaa/64 scope link
valid_lft forever preferred_lft forever
Suppose the address you want to back up is ``10.0.2.16``, and will be managed
by the virtual router with id ``5``. A macvlan device with the appropriate MAC
address must be created before VRRP can begin to operate.
Suppose that the IPv4 and IPv6 addresses you want to back up are ``10.0.2.16``
and ``2001:db8::370:7334``, and that they will be managed by the virtual router
with id ``5``. A macvlan device with the appropriate MAC address must be created
before VRRP can begin to operate.
If you are using ``ifupdown2``, the configuration is as follows:
@ -426,10 +427,11 @@ Show commands, global defaults and debugging configuration commands.
VRID will only show routers with that VRID. Specifying ``json`` will dump
each router state in a JSON array.
.. index:: debug vrrp [{protocol|autoconfigure|packets|sockets|ndisc|arp|zebra}]
.. clicmd:: debug vrrp [{protocol|autoconfigure|packets|sockets|ndisc|arp|zebra}]
.. index:: [no] debug vrrp [{protocol|autoconfigure|packets|sockets|ndisc|arp|zebra}]
.. clicmd:: [no] debug vrrp [{protocol|autoconfigure|packets|sockets|ndisc|arp|zebra}]
Toggle debugging logs for some or all components of VRRP.
Toggle debugging logs for VRRP components.
If no component is specified, debugging for all components are turned on/off.
protocol
Logs state changes, election protocol decisions, and interface status
@ -482,7 +484,8 @@ execute the following command:
.. clicmd:: [no] vrrp autoconfigure [version (2-3)]
Generates VRRP configuration based on the interface configuration on the
base system. Any existing interfaces that are configured properly for VRRP -
base system. If the protocol version is not specified, the default is VRRPv3.
Any existing interfaces that are configured properly for VRRP -
i.e. have the correct MAC address, link local address (when required), IPv4
and IPv6 addresses - are used to create a VRRP router on their parent
interfaces, with VRRP IPvX addresses taken from the addresses assigned to