2023-02-08 13:17:09 +01:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
/*
|
|
|
|
* PBR-nht Code
|
|
|
|
* Copyright (C) 2018 Cumulus Networks, Inc.
|
|
|
|
* Donald Sharp
|
|
|
|
*/
|
|
|
|
#include <zebra.h>
|
|
|
|
|
|
|
|
#include <log.h>
|
|
|
|
#include <nexthop.h>
|
2019-06-24 20:04:13 +02:00
|
|
|
#include "nexthop_group.h"
|
|
|
|
#include "nexthop_group_private.h"
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
#include <hash.h>
|
|
|
|
#include <jhash.h>
|
|
|
|
#include <vty.h>
|
|
|
|
#include <zclient.h>
|
2018-03-19 14:04:17 +01:00
|
|
|
#include <debug.h>
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
#include "pbrd/pbr_nht.h"
|
|
|
|
#include "pbrd/pbr_map.h"
|
|
|
|
#include "pbrd/pbr_zebra.h"
|
|
|
|
#include "pbrd/pbr_memory.h"
|
|
|
|
#include "pbrd/pbr_debug.h"
|
|
|
|
|
|
|
|
DEFINE_MTYPE_STATIC(PBRD, PBR_NHG, "PBR Nexthop Groups");
|
|
|
|
|
2020-08-20 16:34:38 +02:00
|
|
|
struct hash *pbr_nhg_hash;
|
2018-03-19 14:04:17 +01:00
|
|
|
static struct hash *pbr_nhrc_hash;
|
2021-05-15 04:53:56 +02:00
|
|
|
static struct hash *pbr_nhg_allocated_id_hash;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
static uint32_t pbr_nhg_low_table;
|
|
|
|
static uint32_t pbr_nhg_high_table;
|
2021-05-15 04:53:56 +02:00
|
|
|
static uint32_t pbr_next_unallocated_table_id;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
static uint32_t pbr_nhg_low_rule;
|
|
|
|
static uint32_t pbr_nhg_high_rule;
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
static void pbr_nht_install_nexthop_group(struct pbr_nexthop_group_cache *pnhgc,
|
|
|
|
struct nexthop_group nhg);
|
2018-03-21 22:23:32 +01:00
|
|
|
static void
|
|
|
|
pbr_nht_uninstall_nexthop_group(struct pbr_nexthop_group_cache *pnhgc,
|
|
|
|
struct nexthop_group nhg,
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Nexthop refcount.
|
|
|
|
*/
|
|
|
|
struct nhrc {
|
|
|
|
struct nexthop nexthop;
|
|
|
|
unsigned int refcount;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Hash functions for pbr_nhrc_hash ---------------------------------------- */
|
|
|
|
|
|
|
|
static void *pbr_nhrc_hash_alloc(void *p)
|
|
|
|
{
|
|
|
|
struct nhrc *nhrc = XCALLOC(MTYPE_PBR_NHG, sizeof(struct nhrc));
|
|
|
|
nhrc->nexthop = *(struct nexthop *)p;
|
2019-06-10 06:36:59 +02:00
|
|
|
nhrc->nexthop.next = NULL;
|
|
|
|
nhrc->nexthop.prev = NULL;
|
2018-03-19 14:04:17 +01:00
|
|
|
return nhrc;
|
|
|
|
}
|
|
|
|
|
2018-10-17 21:27:12 +02:00
|
|
|
static bool pbr_nhrc_hash_equal(const void *arg1, const void *arg2)
|
2018-03-19 14:04:17 +01:00
|
|
|
{
|
|
|
|
const struct nexthop *nh1, *nh2;
|
|
|
|
|
|
|
|
nh1 = arg1;
|
|
|
|
nh2 = arg2;
|
|
|
|
|
|
|
|
return nexthop_same(nh1, nh2);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
static void *pbr_nh_alloc(void *p)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *new;
|
|
|
|
struct pbr_nexthop_cache *pnhc = (struct pbr_nexthop_cache *)p;
|
2018-03-19 14:04:17 +01:00
|
|
|
struct nhrc *nhrc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
new = XCALLOC(MTYPE_PBR_NHG, sizeof(*new));
|
2020-08-24 21:25:34 +02:00
|
|
|
nhrc = hash_get(pbr_nhrc_hash, &pnhc->nexthop, pbr_nhrc_hash_alloc);
|
|
|
|
new->nexthop = nhrc->nexthop;
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
/* Decremented again in pbr_nh_delete */
|
|
|
|
++nhrc->refcount;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Sending nexthop to Zebra", __func__);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
pbr_send_rnh(&new->nexthop, true);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
new->valid = false;
|
|
|
|
return new;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nh_delete(struct pbr_nexthop_cache **pnhc)
|
|
|
|
{
|
2018-03-19 14:04:17 +01:00
|
|
|
struct nhrc *nhrc;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
nhrc = hash_lookup(pbr_nhrc_hash, &((*pnhc)->nexthop));
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
if (nhrc)
|
|
|
|
--nhrc->refcount;
|
|
|
|
if (!nhrc || nhrc->refcount == 0) {
|
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Removing nexthop from Zebra",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__);
|
2020-08-24 21:25:34 +02:00
|
|
|
pbr_send_rnh(&((*pnhc)->nexthop), false);
|
2018-03-19 14:04:17 +01:00
|
|
|
}
|
|
|
|
if (nhrc && nhrc->refcount == 0) {
|
|
|
|
hash_release(pbr_nhrc_hash, nhrc);
|
|
|
|
XFREE(MTYPE_PBR_NHG, nhrc);
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
XFREE(MTYPE_PBR_NHG, *pnhc);
|
|
|
|
}
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nh_delete_iterate(struct hash_bucket *b, void *p)
|
2018-03-19 14:04:17 +01:00
|
|
|
{
|
|
|
|
pbr_nh_delete((struct pbr_nexthop_cache **)&b->data);
|
|
|
|
}
|
|
|
|
|
2019-05-14 22:19:07 +02:00
|
|
|
static uint32_t pbr_nh_hash_key(const void *arg)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
uint32_t key;
|
2019-05-14 22:19:07 +02:00
|
|
|
const struct pbr_nexthop_cache *pbrnc = arg;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
key = nexthop_hash(&pbrnc->nexthop);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
return key;
|
|
|
|
}
|
|
|
|
|
2018-10-17 21:27:12 +02:00
|
|
|
static bool pbr_nh_hash_equal(const void *arg1, const void *arg2)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
const struct pbr_nexthop_cache *pbrnc1 =
|
|
|
|
(const struct pbr_nexthop_cache *)arg1;
|
|
|
|
const struct pbr_nexthop_cache *pbrnc2 =
|
|
|
|
(const struct pbr_nexthop_cache *)arg2;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pbrnc1->nexthop.vrf_id != pbrnc2->nexthop.vrf_id)
|
2018-10-17 21:27:12 +02:00
|
|
|
return false;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pbrnc1->nexthop.ifindex != pbrnc2->nexthop.ifindex)
|
2018-10-17 21:27:12 +02:00
|
|
|
return false;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pbrnc1->nexthop.type != pbrnc2->nexthop.type)
|
2018-10-17 21:27:12 +02:00
|
|
|
return false;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
switch (pbrnc1->nexthop.type) {
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
2020-08-24 21:25:34 +02:00
|
|
|
return pbrnc1->nexthop.ifindex == pbrnc2->nexthop.ifindex;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_IPV4:
|
2020-08-24 21:25:34 +02:00
|
|
|
return pbrnc1->nexthop.gate.ipv4.s_addr
|
|
|
|
== pbrnc2->nexthop.gate.ipv4.s_addr;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
2020-08-24 21:25:34 +02:00
|
|
|
return !memcmp(&pbrnc1->nexthop.gate.ipv6,
|
|
|
|
&pbrnc2->nexthop.gate.ipv6, 16);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
2020-08-24 21:25:34 +02:00
|
|
|
return pbrnc1->nexthop.bh_type == pbrnc2->nexthop.bh_type;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We should not get here
|
|
|
|
*/
|
2018-10-17 21:27:12 +02:00
|
|
|
return false;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
static void pbr_nhgc_delete(struct pbr_nexthop_group_cache *p)
|
|
|
|
{
|
|
|
|
hash_iterate(p->nhh, pbr_nh_delete_iterate, NULL);
|
|
|
|
hash_free(p->nhh);
|
|
|
|
XFREE(MTYPE_PBR_NHG, p);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void *pbr_nhgc_alloc(void *p)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *new;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc =
|
|
|
|
(struct pbr_nexthop_group_cache *)p;
|
|
|
|
|
|
|
|
new = XCALLOC(MTYPE_PBR_NHG, sizeof(*new));
|
|
|
|
|
2019-05-06 23:27:33 +02:00
|
|
|
strlcpy(new->name, pnhgc->name, sizeof(pnhgc->name));
|
2021-05-15 04:53:56 +02:00
|
|
|
pbr_nht_reserve_next_table_id(new);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: NHT: %s assigned Table ID: %u", __func__,
|
|
|
|
new->name, new->table_id);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
new->nhh = hash_create_size(8, pbr_nh_hash_key, pbr_nh_hash_equal,
|
|
|
|
"PBR NH Cache Hash");
|
|
|
|
return new;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
void pbr_nhgroup_add_cb(const char *name)
|
|
|
|
{
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct nexthop_group_cmd *nhgc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
nhgc = nhgc_find(name);
|
2018-04-17 23:59:47 +02:00
|
|
|
|
|
|
|
if (!nhgc) {
|
2021-02-14 15:35:07 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Could not find nhgc with name: %s",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__, name);
|
2018-04-17 23:59:47 +02:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
pnhgc = pbr_nht_add_group(name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-06-13 22:00:58 +02:00
|
|
|
if (!pnhgc)
|
|
|
|
return;
|
|
|
|
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Added nexthop-group %s", __func__, name);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
pbr_map_check_nh_group_change(name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2022-10-24 15:25:54 +02:00
|
|
|
void pbr_nhgroup_modify_cb(const struct nexthop_group_cmd *nhgc)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
void pbr_nhgroup_add_nexthop_cb(const struct nexthop_group_cmd *nhgc,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
const struct nexthop *nhop)
|
|
|
|
{
|
2018-03-19 14:04:17 +01:00
|
|
|
char debugstr[256];
|
2018-12-01 16:49:45 +01:00
|
|
|
struct pbr_nexthop_group_cache pnhgc_find = {};
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
2018-12-01 16:49:45 +01:00
|
|
|
struct pbr_nexthop_cache pnhc_find = {};
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
|
|
|
|
/* find pnhgc by name */
|
|
|
|
strlcpy(pnhgc_find.name, nhgc->name, sizeof(pnhgc_find.name));
|
2021-05-15 08:41:28 +02:00
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &pnhgc_find);
|
|
|
|
|
|
|
|
if (!pnhgc) {
|
|
|
|
/* Check if configured table range is exhausted */
|
|
|
|
if (!pbr_nht_has_unallocated_table()) {
|
|
|
|
zlog_warn(
|
|
|
|
"%s: Exhausted all table identifiers; cannot create nexthop-group cache for nexthop-group '%s'",
|
|
|
|
__func__, nhgc->name);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* No nhgc but range not exhausted? Then alloc it */
|
|
|
|
pnhgc = hash_get(pbr_nhg_hash, &pnhgc_find, pbr_nhgc_alloc);
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
/* create & insert new pnhc into pnhgc->nhh */
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhc_find.nexthop = *nhop;
|
2018-03-19 14:04:17 +01:00
|
|
|
pnhc = hash_get(pnhgc->nhh, &pnhc_find, pbr_nh_alloc);
|
|
|
|
|
|
|
|
/* set parent pnhgc */
|
|
|
|
pnhc->parent = pnhgc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
if (DEBUG_MODE_CHECK(&pbr_dbg_nht, DEBUG_MODE_ALL)) {
|
|
|
|
nexthop2str(nhop, debugstr, sizeof(debugstr));
|
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Added %s to nexthop-group %s",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__, debugstr, nhgc->name);
|
2018-03-19 14:04:17 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
pbr_nht_install_nexthop_group(pnhgc, nhgc->nhg);
|
|
|
|
pbr_map_check_nh_group_change(nhgc->name);
|
2019-02-14 23:00:15 +01:00
|
|
|
|
2019-10-08 00:01:21 +02:00
|
|
|
if (nhop->type == NEXTHOP_TYPE_IFINDEX
|
|
|
|
|| (nhop->type == NEXTHOP_TYPE_IPV6_IFINDEX
|
|
|
|
&& IN6_IS_ADDR_LINKLOCAL(&nhop->gate.ipv6))) {
|
2019-02-14 23:00:15 +01:00
|
|
|
struct interface *ifp;
|
|
|
|
|
|
|
|
ifp = if_lookup_by_index(nhop->ifindex, nhop->vrf_id);
|
|
|
|
if (ifp)
|
|
|
|
pbr_nht_nexthop_interface_update(ifp);
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
void pbr_nhgroup_del_nexthop_cb(const struct nexthop_group_cmd *nhgc,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
const struct nexthop *nhop)
|
|
|
|
{
|
2018-03-19 14:04:17 +01:00
|
|
|
char debugstr[256];
|
2018-12-01 16:49:45 +01:00
|
|
|
struct pbr_nexthop_group_cache pnhgc_find = {};
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
2018-12-01 16:49:45 +01:00
|
|
|
struct pbr_nexthop_cache pnhc_find = {};
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_cache *pnhc;
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type = nhop->type;
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
/* find pnhgc by name */
|
|
|
|
strlcpy(pnhgc_find.name, nhgc->name, sizeof(pnhgc_find.name));
|
2018-06-13 22:00:58 +02:00
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &pnhgc_find);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
/*
|
|
|
|
* Ignore deletions of nhg we did not / could not allocate nhgc for
|
|
|
|
* Occurs when PBR table range is full but new nhg keep coming in
|
|
|
|
*/
|
|
|
|
if (!pnhgc)
|
|
|
|
return;
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
/* delete pnhc from pnhgc->nhh */
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhc_find.nexthop = *nhop;
|
2018-03-19 14:04:17 +01:00
|
|
|
pnhc = hash_release(pnhgc->nhh, &pnhc_find);
|
|
|
|
|
|
|
|
/* delete pnhc */
|
|
|
|
pbr_nh_delete(&pnhc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
if (DEBUG_MODE_CHECK(&pbr_dbg_nht, DEBUG_MODE_ALL)) {
|
|
|
|
nexthop2str(nhop, debugstr, sizeof(debugstr));
|
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Removed %s from nexthop-group %s",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__, debugstr, nhgc->name);
|
2018-03-19 14:04:17 +01:00
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-03-21 22:23:32 +01:00
|
|
|
if (pnhgc->nhh->count)
|
|
|
|
pbr_nht_install_nexthop_group(pnhgc, nhgc->nhg);
|
|
|
|
else
|
2019-02-14 23:00:14 +01:00
|
|
|
pbr_nht_uninstall_nexthop_group(pnhgc, nhgc->nhg, nh_type);
|
2018-03-21 22:23:32 +01:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
pbr_map_check_nh_group_change(nhgc->name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nhgroup_delete_cb(const char *name)
|
|
|
|
{
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Removed nexthop-group %s", __func__, name);
|
2018-03-19 14:04:17 +01:00
|
|
|
|
2018-03-21 22:23:32 +01:00
|
|
|
/* delete group from all pbrms's */
|
|
|
|
pbr_nht_delete_group(name);
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
pbr_map_check_nh_group_change(name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2020-07-02 02:02:37 +02:00
|
|
|
static void
|
|
|
|
pbr_nht_find_nhg_from_table_update(struct pbr_nexthop_group_cache *pnhgc,
|
|
|
|
uint32_t table_id, bool installed)
|
|
|
|
{
|
|
|
|
if (pnhgc->table_id == table_id) {
|
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: %s: Table ID (%u) matches %s",
|
|
|
|
__func__, (installed ? "install" : "remove"), table_id,
|
|
|
|
pnhgc->name);
|
|
|
|
|
|
|
|
pnhgc->installed = installed;
|
|
|
|
pnhgc->valid = installed;
|
|
|
|
pbr_map_schedule_policy_from_nhg(pnhgc->name, pnhgc->installed);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nht_find_nhg_from_table_install(struct hash_bucket *b,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc =
|
|
|
|
(struct pbr_nexthop_group_cache *)b->data;
|
2020-07-02 02:02:37 +02:00
|
|
|
uint32_t table_id = *(uint32_t *)data;
|
|
|
|
|
|
|
|
pbr_nht_find_nhg_from_table_update(pnhgc, table_id, true);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_route_installed_for_table(uint32_t table_id)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_find_nhg_from_table_install,
|
|
|
|
&table_id);
|
|
|
|
}
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nht_find_nhg_from_table_remove(struct hash_bucket *b,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
void *data)
|
|
|
|
{
|
2020-07-02 02:02:37 +02:00
|
|
|
struct pbr_nexthop_group_cache *pnhgc =
|
|
|
|
(struct pbr_nexthop_group_cache *)b->data;
|
|
|
|
uint32_t table_id = *(uint32_t *)data;
|
|
|
|
|
|
|
|
pbr_nht_find_nhg_from_table_update(pnhgc, table_id, false);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_route_removed_for_table(uint32_t table_id)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_find_nhg_from_table_remove,
|
|
|
|
&table_id);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Loop through all nexthops in a nexthop group to check that they are all the
|
|
|
|
* same. If they are not all the same, log this peculiarity.
|
|
|
|
*
|
|
|
|
* nhg
|
|
|
|
* The nexthop group to check
|
|
|
|
*
|
|
|
|
* Returns:
|
|
|
|
* - AFI of last nexthop in the group
|
|
|
|
* - AFI_MAX on error
|
|
|
|
*/
|
2018-03-21 22:23:32 +01:00
|
|
|
static afi_t pbr_nht_which_afi(struct nexthop_group nhg,
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct nexthop *nexthop;
|
|
|
|
afi_t install_afi = AFI_MAX;
|
|
|
|
bool v6, v4, bh;
|
2018-03-15 16:56:07 +01:00
|
|
|
|
2019-02-14 23:00:15 +01:00
|
|
|
if (nh_type) {
|
|
|
|
switch (nh_type) {
|
|
|
|
case NEXTHOP_TYPE_IPV4:
|
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
|
|
|
return AFI_IP;
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
|
|
|
return AFI_IP6;
|
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
|
|
|
return AFI_MAX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
v6 = v4 = bh = false;
|
|
|
|
|
2019-02-14 23:00:15 +01:00
|
|
|
for (ALL_NEXTHOPS(nhg, nexthop)) {
|
|
|
|
nh_type = nexthop->type;
|
|
|
|
|
|
|
|
switch (nh_type) {
|
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
|
|
|
break;
|
|
|
|
case NEXTHOP_TYPE_IPV4:
|
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
|
|
|
v6 = true;
|
|
|
|
install_afi = AFI_IP;
|
|
|
|
break;
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
|
|
|
v4 = true;
|
|
|
|
install_afi = AFI_IP6;
|
|
|
|
break;
|
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
|
|
|
bh = true;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-02-14 23:00:15 +01:00
|
|
|
/* Interface and/or blackhole nexthops only. */
|
|
|
|
if (!v4 && !v6)
|
2018-03-21 22:23:32 +01:00
|
|
|
install_afi = AFI_MAX;
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
if (!bh && v6 && v4)
|
|
|
|
DEBUGD(&pbr_dbg_nht,
|
2020-03-06 15:23:22 +01:00
|
|
|
"%s: Saw both V6 and V4 nexthops...using %s", __func__,
|
|
|
|
afi2str(install_afi));
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
if (bh && (v6 || v4))
|
|
|
|
DEBUGD(&pbr_dbg_nht,
|
|
|
|
"%s: Saw blackhole nexthop(s) with %s%s%s nexthop(s), using AFI_MAX.",
|
2020-03-06 15:23:22 +01:00
|
|
|
__func__, v4 ? "v4" : "", (v4 && v6) ? " and " : "",
|
|
|
|
v6 ? "v6" : "");
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
return install_afi;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nht_install_nexthop_group(struct pbr_nexthop_group_cache *pnhgc,
|
|
|
|
struct nexthop_group nhg)
|
|
|
|
{
|
|
|
|
afi_t install_afi;
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type = 0;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2019-02-14 23:00:14 +01:00
|
|
|
install_afi = pbr_nht_which_afi(nhg, nh_type);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
route_add(pnhgc, nhg, install_afi);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pbr_nht_uninstall_nexthop_group(struct pbr_nexthop_group_cache *pnhgc,
|
2018-03-21 22:23:32 +01:00
|
|
|
struct nexthop_group nhg,
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
afi_t install_afi;
|
|
|
|
|
2019-02-14 23:00:14 +01:00
|
|
|
install_afi = pbr_nht_which_afi(nhg, nh_type);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
pnhgc->installed = false;
|
|
|
|
pnhgc->valid = false;
|
|
|
|
route_delete(pnhgc, install_afi);
|
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_change_group(const char *name)
|
|
|
|
{
|
|
|
|
struct nexthop_group_cmd *nhgc;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct pbr_nexthop_group_cache find;
|
|
|
|
struct nexthop *nhop;
|
|
|
|
|
|
|
|
nhgc = nhgc_find(name);
|
|
|
|
if (!nhgc)
|
|
|
|
return;
|
|
|
|
|
|
|
|
memset(&find, 0, sizeof(find));
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(find.name, sizeof(find.name), "%s", name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &find);
|
|
|
|
|
|
|
|
if (!pnhgc) {
|
|
|
|
DEBUGD(&pbr_dbg_nht,
|
|
|
|
"%s: Could not find nexthop-group cache w/ name '%s'",
|
2020-03-06 15:23:22 +01:00
|
|
|
__func__, name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (ALL_NEXTHOPS(nhgc->nhg, nhop)) {
|
|
|
|
struct pbr_nexthop_cache lookup;
|
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
lookup.nexthop = *nhop;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhc = hash_lookup(pnhgc->nhh, &lookup);
|
|
|
|
if (!pnhc) {
|
|
|
|
pnhc = hash_get(pnhgc->nhh, &lookup, pbr_nh_alloc);
|
|
|
|
pnhc->parent = pnhgc;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
pbr_nht_install_nexthop_group(pnhgc, nhgc->nhg);
|
|
|
|
}
|
|
|
|
|
|
|
|
char *pbr_nht_nexthop_make_name(char *name, size_t l,
|
|
|
|
uint32_t seqno, char *buffer)
|
|
|
|
{
|
|
|
|
snprintf(buffer, l, "%s%u", name, seqno);
|
|
|
|
return buffer;
|
|
|
|
}
|
|
|
|
|
2022-01-27 18:41:49 +01:00
|
|
|
/* Set data derived from nhg in pbrms */
|
|
|
|
void pbr_nht_set_seq_nhg_data(struct pbr_map_sequence *pbrms,
|
|
|
|
const struct nexthop_group_cmd *nhgc)
|
|
|
|
{
|
|
|
|
const struct nexthop_group *nhg;
|
|
|
|
|
|
|
|
if (!nhgc)
|
|
|
|
return;
|
|
|
|
|
|
|
|
nhg = &nhgc->nhg;
|
|
|
|
if (!nhg->nexthop)
|
|
|
|
return;
|
|
|
|
|
|
|
|
switch (nhg->nexthop->type) {
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
|
|
|
pbrms->family = AF_INET6;
|
|
|
|
break;
|
|
|
|
case NEXTHOP_TYPE_IPV4:
|
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
|
|
|
pbrms->family = AF_INET;
|
2023-10-10 23:15:32 +02:00
|
|
|
break;
|
2023-01-30 16:10:45 +01:00
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
2022-01-27 18:41:49 +01:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure a routemap sequence to use a given nexthop group */
|
|
|
|
void pbr_nht_set_seq_nhg(struct pbr_map_sequence *pbrms, const char *name)
|
|
|
|
{
|
|
|
|
struct nexthop_group_cmd *nhgc;
|
|
|
|
|
|
|
|
if (!name)
|
|
|
|
return;
|
|
|
|
|
|
|
|
pbrms->nhgrp_name = XSTRDUP(MTYPE_TMP, name);
|
2023-07-31 06:33:10 +02:00
|
|
|
pbrms->forwarding_type = PBR_FT_NEXTHOP_GROUP;
|
2022-01-27 18:41:49 +01:00
|
|
|
|
|
|
|
nhgc = nhgc_find(name);
|
|
|
|
if (!nhgc)
|
|
|
|
return;
|
|
|
|
|
|
|
|
pbr_nht_set_seq_nhg_data(pbrms, nhgc);
|
|
|
|
}
|
|
|
|
|
2019-12-18 22:11:39 +01:00
|
|
|
void pbr_nht_add_individual_nexthop(struct pbr_map_sequence *pbrms,
|
|
|
|
const struct nexthop *nhop)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct pbr_nexthop_group_cache find;
|
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
struct pbr_nexthop_cache lookup;
|
2019-12-18 22:11:39 +01:00
|
|
|
struct nexthop *nh;
|
|
|
|
char buf[PBR_NHC_NAMELEN];
|
|
|
|
|
|
|
|
pbrms->nhg = nexthop_group_new();
|
|
|
|
pbrms->internal_nhg_name = XSTRDUP(
|
|
|
|
MTYPE_TMP,
|
|
|
|
pbr_nht_nexthop_make_name(pbrms->parent->name, PBR_NHC_NAMELEN,
|
|
|
|
pbrms->seqno, buf));
|
2023-07-31 06:33:10 +02:00
|
|
|
pbrms->forwarding_type = PBR_FT_NEXTHOP_SINGLE;
|
2019-12-18 22:11:39 +01:00
|
|
|
|
|
|
|
nh = nexthop_new();
|
|
|
|
memcpy(nh, nhop, sizeof(*nh));
|
|
|
|
|
|
|
|
nexthop_group_add_sorted(pbrms->nhg, nh);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
memset(&find, 0, sizeof(find));
|
2018-05-15 19:34:52 +02:00
|
|
|
pbr_nht_nexthop_make_name(pbrms->parent->name, PBR_NHC_NAMELEN,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pbrms->seqno, find.name);
|
2018-06-13 22:00:58 +02:00
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
if (!pbr_nht_has_unallocated_table()) {
|
2018-06-13 22:00:58 +02:00
|
|
|
zlog_warn(
|
|
|
|
"%s: Exhausted all table identifiers; cannot create nexthop-group cache for nexthop-group '%s'",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__, find.name);
|
2018-06-13 22:00:58 +02:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
if (!pbrms->internal_nhg_name)
|
|
|
|
pbrms->internal_nhg_name = XSTRDUP(MTYPE_TMP, find.name);
|
|
|
|
|
|
|
|
pnhgc = hash_get(pbr_nhg_hash, &find, pbr_nhgc_alloc);
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
lookup.nexthop = *pbrms->nhg->nexthop;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhc = hash_get(pnhgc->nhh, &lookup, pbr_nh_alloc);
|
|
|
|
pnhc->parent = pnhgc;
|
2020-08-20 16:34:38 +02:00
|
|
|
if (nhop->vrf_id != VRF_DEFAULT) {
|
|
|
|
struct vrf *vrf = vrf_lookup_by_id(nhop->vrf_id);
|
|
|
|
|
|
|
|
if (vrf)
|
|
|
|
strlcpy(pnhc->vrf_name, vrf->name,
|
|
|
|
sizeof(pnhc->vrf_name));
|
|
|
|
}
|
2020-08-20 18:55:45 +02:00
|
|
|
|
|
|
|
if (nhop->ifindex != 0) {
|
|
|
|
struct interface *ifp =
|
|
|
|
if_lookup_by_index(nhop->ifindex, nhop->vrf_id);
|
|
|
|
|
|
|
|
if (ifp)
|
|
|
|
strlcpy(pnhc->intf_name, ifp->name,
|
|
|
|
sizeof(pnhc->intf_name));
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pbr_nht_install_nexthop_group(pnhgc, *pbrms->nhg);
|
|
|
|
}
|
|
|
|
|
2019-12-18 22:11:39 +01:00
|
|
|
static void pbr_nht_release_individual_nexthop(struct pbr_map_sequence *pbrms)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct pbr_nexthop_group_cache find;
|
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
struct pbr_nexthop_cache lup;
|
|
|
|
struct nexthop *nh;
|
2019-02-14 23:00:14 +01:00
|
|
|
enum nexthop_types_t nh_type = 0;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
memset(&find, 0, sizeof(find));
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(find.name, sizeof(find.name), "%s", pbrms->internal_nhg_name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &find);
|
|
|
|
|
|
|
|
nh = pbrms->nhg->nexthop;
|
2019-02-14 23:00:14 +01:00
|
|
|
nh_type = nh->type;
|
2020-08-24 21:25:34 +02:00
|
|
|
lup.nexthop = *nh;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhc = hash_lookup(pnhgc->nhh, &lup);
|
|
|
|
pnhc->parent = NULL;
|
|
|
|
hash_release(pnhgc->nhh, pnhc);
|
|
|
|
pbr_nh_delete(&pnhc);
|
2019-02-14 23:00:14 +01:00
|
|
|
pbr_nht_uninstall_nexthop_group(pnhgc, *pbrms->nhg, nh_type);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
hash_release(pbr_nhg_hash, pnhgc);
|
2020-04-06 18:51:55 +02:00
|
|
|
pbr_nhgc_delete(pnhgc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
nexthop_group_delete(&pbrms->nhg);
|
|
|
|
XFREE(MTYPE_TMP, pbrms->internal_nhg_name);
|
|
|
|
}
|
|
|
|
|
2019-12-18 22:11:39 +01:00
|
|
|
void pbr_nht_delete_individual_nexthop(struct pbr_map_sequence *pbrms)
|
|
|
|
{
|
|
|
|
pbr_map_delete_nexthops(pbrms);
|
|
|
|
|
|
|
|
pbr_nht_release_individual_nexthop(pbrms);
|
|
|
|
}
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_group_cache *pbr_nht_add_group(const char *name)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct nexthop *nhop;
|
|
|
|
struct nexthop_group_cmd *nhgc;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct pbr_nexthop_group_cache lookup;
|
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
if (!pbr_nht_has_unallocated_table()) {
|
2018-06-13 22:00:58 +02:00
|
|
|
zlog_warn(
|
|
|
|
"%s: Exhausted all table identifiers; cannot create nexthop-group cache for nexthop-group '%s'",
|
2020-03-06 15:23:22 +01:00
|
|
|
__func__, name);
|
2018-06-13 22:00:58 +02:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
nhgc = nhgc_find(name);
|
|
|
|
|
|
|
|
if (!nhgc) {
|
2021-02-14 15:35:07 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Could not find nhgc with name: %s",
|
2020-03-06 15:23:22 +01:00
|
|
|
__func__, name);
|
2018-03-19 14:04:17 +01:00
|
|
|
return NULL;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(lookup.name, sizeof(lookup.name), "%s", name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc = hash_get(pbr_nhg_hash, &lookup, pbr_nhgc_alloc);
|
2020-03-06 15:23:22 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: Retrieved NHGC @ %p", __func__, pnhgc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
for (ALL_NEXTHOPS(nhgc->nhg, nhop)) {
|
2018-09-13 17:37:08 +02:00
|
|
|
struct pbr_nexthop_cache lookupc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
lookupc.nexthop = *nhop;
|
2018-09-13 17:37:08 +02:00
|
|
|
pnhc = hash_lookup(pnhgc->nhh, &lookupc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
if (!pnhc) {
|
2018-09-13 17:37:08 +02:00
|
|
|
pnhc = hash_get(pnhgc->nhh, &lookupc, pbr_nh_alloc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhc->parent = pnhgc;
|
|
|
|
}
|
|
|
|
}
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
return pnhgc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_delete_group(const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_map_sequence *pbrms;
|
|
|
|
struct listnode *snode;
|
|
|
|
struct pbr_map *pbrm;
|
2018-03-19 14:04:17 +01:00
|
|
|
struct pbr_nexthop_group_cache pnhgc_find;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
RB_FOREACH (pbrm, pbr_map_entry_head, &pbr_maps) {
|
|
|
|
for (ALL_LIST_ELEMENTS_RO(pbrm->seqnumbers, snode, pbrms)) {
|
|
|
|
if (pbrms->nhgrp_name
|
2018-03-19 14:04:17 +01:00
|
|
|
&& strmatch(pbrms->nhgrp_name, name)) {
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pbrms->reason |= PBR_MAP_INVALID_NO_NEXTHOPS;
|
2018-03-19 14:04:17 +01:00
|
|
|
pbrms->nhg = NULL;
|
|
|
|
pbrms->internal_nhg_name = NULL;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pbrm->valid = false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2018-03-19 14:04:17 +01:00
|
|
|
|
|
|
|
strlcpy(pnhgc_find.name, name, sizeof(pnhgc_find.name));
|
|
|
|
pnhgc = hash_release(pbr_nhg_hash, &pnhgc_find);
|
2021-05-15 04:53:56 +02:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Ignore deletions of nh we did not / could not allocate nhgc for
|
|
|
|
* Occurs when PBR table range is full but new nhg keep coming in
|
|
|
|
*/
|
|
|
|
if (!pnhgc)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Remove and recalculate the next table id */
|
|
|
|
hash_release(pbr_nhg_allocated_id_hash, pnhgc);
|
|
|
|
pbr_nht_update_next_unallocated_table_id();
|
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
pbr_nhgc_delete(pnhgc);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
bool pbr_nht_nexthop_valid(struct nexthop_group *nhg)
|
|
|
|
{
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: %p", __func__, nhg);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool pbr_nht_nexthop_group_valid(const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
struct pbr_nexthop_group_cache lookup;
|
|
|
|
|
2020-03-05 19:17:54 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: %s", __func__, name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(lookup.name, sizeof(lookup.name), "%s", name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc = hash_get(pbr_nhg_hash, &lookup, NULL);
|
|
|
|
if (!pnhgc)
|
|
|
|
return false;
|
2021-02-14 15:35:07 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, "%s: %d %d", __func__, pnhgc->valid,
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc->installed);
|
|
|
|
if (pnhgc->valid && pnhgc->installed)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pbr_nht_individual {
|
|
|
|
struct zapi_route *nhr;
|
2019-02-14 23:00:15 +01:00
|
|
|
struct interface *ifp;
|
2020-08-20 16:34:38 +02:00
|
|
|
struct pbr_vrf *pbr_vrf;
|
|
|
|
struct pbr_nexthop_cache *pnhc;
|
2020-08-24 21:14:44 +02:00
|
|
|
vrf_id_t old_vrf_id;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-09-01 18:34:48 +02:00
|
|
|
bool valid;
|
2020-08-20 16:34:38 +02:00
|
|
|
|
|
|
|
bool nhr_matched;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
};
|
|
|
|
|
2019-09-11 20:22:55 +02:00
|
|
|
static bool
|
|
|
|
pbr_nht_individual_nexthop_gw_update(struct pbr_nexthop_cache *pnhc,
|
2020-08-27 16:04:52 +02:00
|
|
|
struct pbr_nht_individual *pnhi)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
2019-09-11 20:22:55 +02:00
|
|
|
bool is_valid = pnhc->valid;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2020-12-10 16:18:00 +01:00
|
|
|
/*
|
|
|
|
* If we have an interface down event, let's note that
|
|
|
|
* it is happening and find all the nexthops that depend
|
|
|
|
* on that interface. As that if we have an interface
|
|
|
|
* flapping fast enough it means that zebra might turn
|
|
|
|
* those nexthop tracking events into a no-update
|
|
|
|
* So let's search and do the right thing on the
|
|
|
|
* interface event.
|
|
|
|
*/
|
2021-05-19 15:24:21 +02:00
|
|
|
if (!pnhi->nhr) {
|
2020-12-10 16:18:00 +01:00
|
|
|
switch (pnhc->nexthop.type) {
|
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
2021-01-07 21:28:28 +01:00
|
|
|
case NEXTHOP_TYPE_IPV4:
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
|
|
|
goto done;
|
2020-12-10 16:18:00 +01:00
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
2021-01-07 21:28:28 +01:00
|
|
|
if (pnhc->nexthop.ifindex == pnhi->ifp->ifindex)
|
|
|
|
is_valid = if_is_up(pnhi->ifp);
|
|
|
|
goto done;
|
2020-12-10 16:18:00 +01:00
|
|
|
}
|
|
|
|
|
2019-09-11 20:22:55 +02:00
|
|
|
goto done;
|
2020-12-10 16:18:00 +01:00
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2021-05-19 15:24:21 +02:00
|
|
|
switch (pnhi->nhr->prefix.family) {
|
|
|
|
case AF_INET:
|
|
|
|
if (pnhc->nexthop.gate.ipv4.s_addr
|
|
|
|
!= pnhi->nhr->prefix.u.prefix4.s_addr)
|
|
|
|
goto done; /* Unrelated change */
|
|
|
|
break;
|
|
|
|
case AF_INET6:
|
|
|
|
if (memcmp(&pnhc->nexthop.gate.ipv6,
|
|
|
|
&pnhi->nhr->prefix.u.prefix6, 16)
|
|
|
|
!= 0)
|
|
|
|
goto done; /* Unrelated change */
|
|
|
|
break;
|
2019-09-11 20:22:55 +02:00
|
|
|
}
|
|
|
|
|
2020-08-27 16:04:52 +02:00
|
|
|
pnhi->nhr_matched = true;
|
2019-09-11 20:22:55 +02:00
|
|
|
if (!pnhi->nhr->nexthop_num) {
|
|
|
|
is_valid = false;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhc->nexthop.type == NEXTHOP_TYPE_IPV4_IFINDEX
|
|
|
|
|| pnhc->nexthop.type == NEXTHOP_TYPE_IPV6_IFINDEX) {
|
2019-09-11 20:22:55 +02:00
|
|
|
|
|
|
|
/* GATEWAY_IFINDEX type shouldn't resolve to group */
|
|
|
|
if (pnhi->nhr->nexthop_num > 1) {
|
|
|
|
is_valid = false;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If whatever we resolved to wasn't on the interface we
|
|
|
|
* specified. (i.e. not a connected route), its invalid.
|
|
|
|
*/
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhi->nhr->nexthops[0].ifindex != pnhc->nexthop.ifindex) {
|
2019-09-11 20:22:55 +02:00
|
|
|
is_valid = false;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
is_valid = true;
|
|
|
|
|
|
|
|
done:
|
|
|
|
pnhc->valid = is_valid;
|
|
|
|
|
|
|
|
return pnhc->valid;
|
|
|
|
}
|
|
|
|
|
2020-08-27 16:04:52 +02:00
|
|
|
static bool
|
|
|
|
pbr_nht_individual_nexthop_interface_update(struct pbr_nexthop_cache *pnhc,
|
|
|
|
struct pbr_nht_individual *pnhi)
|
2019-09-11 20:22:55 +02:00
|
|
|
{
|
|
|
|
bool is_valid = pnhc->valid;
|
|
|
|
|
|
|
|
if (!pnhi->ifp) /* It doesn't care about non-interface updates */
|
|
|
|
goto done;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhc->nexthop.ifindex
|
2019-09-11 20:22:55 +02:00
|
|
|
!= pnhi->ifp->ifindex) /* Un-related interface */
|
|
|
|
goto done;
|
|
|
|
|
2020-08-27 16:04:52 +02:00
|
|
|
pnhi->nhr_matched = true;
|
2019-09-11 20:22:55 +02:00
|
|
|
is_valid = !!if_is_up(pnhi->ifp);
|
|
|
|
|
|
|
|
done:
|
|
|
|
pnhc->valid = is_valid;
|
|
|
|
|
|
|
|
return pnhc->valid;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Given this update either from interface or nexthop tracking, re-validate this
|
|
|
|
* nexthop.
|
|
|
|
*
|
|
|
|
* If the update is un-related, the subroutines shoud just return their cached
|
|
|
|
* valid state.
|
|
|
|
*/
|
2020-08-27 16:04:52 +02:00
|
|
|
static void pbr_nht_individual_nexthop_update(struct pbr_nexthop_cache *pnhc,
|
|
|
|
struct pbr_nht_individual *pnhi)
|
2019-09-11 20:22:55 +02:00
|
|
|
{
|
|
|
|
assert(pnhi->nhr || pnhi->ifp); /* Either nexthop or interface update */
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
switch (pnhc->nexthop.type) {
|
2019-09-11 20:22:55 +02:00
|
|
|
case NEXTHOP_TYPE_IFINDEX:
|
|
|
|
pbr_nht_individual_nexthop_interface_update(pnhc, pnhi);
|
|
|
|
break;
|
2019-10-08 00:01:21 +02:00
|
|
|
case NEXTHOP_TYPE_IPV6_IFINDEX:
|
2020-08-24 21:25:34 +02:00
|
|
|
if (IN6_IS_ADDR_LINKLOCAL(&pnhc->nexthop.gate.ipv6)) {
|
2019-10-08 00:01:21 +02:00
|
|
|
pbr_nht_individual_nexthop_interface_update(pnhc, pnhi);
|
|
|
|
break;
|
|
|
|
}
|
2023-10-10 23:15:32 +02:00
|
|
|
fallthrough;
|
2019-10-08 00:01:21 +02:00
|
|
|
case NEXTHOP_TYPE_IPV4_IFINDEX:
|
2019-09-11 20:22:55 +02:00
|
|
|
case NEXTHOP_TYPE_IPV4:
|
|
|
|
case NEXTHOP_TYPE_IPV6:
|
|
|
|
pbr_nht_individual_nexthop_gw_update(pnhc, pnhi);
|
|
|
|
break;
|
|
|
|
case NEXTHOP_TYPE_BLACKHOLE:
|
|
|
|
pnhc->valid = true;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
break;
|
|
|
|
}
|
2019-09-11 20:22:55 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nht_individual_nexthop_update_lookup(struct hash_bucket *b,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct pbr_nht_individual *pnhi = data;
|
|
|
|
bool old_valid;
|
|
|
|
|
|
|
|
old_valid = pnhc->valid;
|
|
|
|
|
|
|
|
pbr_nht_individual_nexthop_update(pnhc, pnhi);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2021-02-14 15:35:07 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, " Found %pFX: old: %d new: %d",
|
2020-10-18 13:33:54 +02:00
|
|
|
&pnhi->nhr->prefix, old_valid, pnhc->valid);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
if (pnhc->valid)
|
2020-09-01 18:34:48 +02:00
|
|
|
pnhi->valid = true;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2019-06-10 06:39:40 +02:00
|
|
|
static void pbr_nexthop_group_cache_iterate_to_group(struct hash_bucket *b,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct nexthop_group *nhg = data;
|
|
|
|
struct nexthop *nh = NULL;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
copy_nexthops(&nh, &pnhc->nexthop, NULL);
|
2019-06-10 06:39:40 +02:00
|
|
|
|
2019-06-24 20:04:13 +02:00
|
|
|
_nexthop_add(&nhg->nexthop, nh);
|
2019-06-10 06:39:40 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pbr_nexthop_group_cache_to_nexthop_group(struct nexthop_group *nhg,
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc)
|
|
|
|
{
|
|
|
|
hash_iterate(pnhgc->nhh, pbr_nexthop_group_cache_iterate_to_group, nhg);
|
|
|
|
}
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nht_nexthop_update_lookup(struct hash_bucket *b, void *data)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
2019-09-11 20:22:55 +02:00
|
|
|
struct pbr_nht_individual pnhi = {};
|
2019-06-10 06:39:40 +02:00
|
|
|
struct nexthop_group nhg = {};
|
2018-03-19 14:04:17 +01:00
|
|
|
bool old_valid;
|
|
|
|
|
|
|
|
old_valid = pnhgc->valid;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
pnhi.nhr = (struct zapi_route *)data;
|
2020-09-01 18:34:48 +02:00
|
|
|
pnhi.valid = false;
|
2020-08-27 16:04:52 +02:00
|
|
|
pnhi.nhr_matched = false;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
hash_iterate(pnhgc->nhh, pbr_nht_individual_nexthop_update_lookup,
|
|
|
|
&pnhi);
|
|
|
|
|
2020-08-27 16:04:52 +02:00
|
|
|
if (!pnhi.nhr_matched)
|
|
|
|
return;
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
/*
|
|
|
|
* If any of the specified nexthops are valid we are valid
|
|
|
|
*/
|
|
|
|
pnhgc->valid = !!pnhi.valid;
|
2018-03-19 14:04:17 +01:00
|
|
|
|
2020-06-26 20:16:25 +02:00
|
|
|
pbr_nexthop_group_cache_to_nexthop_group(&nhg, pnhgc);
|
|
|
|
|
|
|
|
if (pnhgc->valid)
|
2019-06-10 06:39:40 +02:00
|
|
|
pbr_nht_install_nexthop_group(pnhgc, nhg);
|
2020-06-26 20:16:25 +02:00
|
|
|
else
|
|
|
|
pbr_nht_uninstall_nexthop_group(pnhgc, nhg, 0);
|
|
|
|
|
|
|
|
/* Don't need copied nexthops anymore */
|
|
|
|
nexthops_free(nhg.nexthop);
|
2019-06-10 06:39:40 +02:00
|
|
|
|
2018-03-19 14:04:17 +01:00
|
|
|
if (old_valid != pnhgc->valid)
|
|
|
|
pbr_map_check_nh_group_change(pnhgc->name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_nexthop_update(struct zapi_route *nhr)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_nexthop_update_lookup, nhr);
|
|
|
|
}
|
|
|
|
|
2020-08-24 21:14:44 +02:00
|
|
|
struct nhrc_vrf_info {
|
|
|
|
struct pbr_vrf *pbr_vrf;
|
|
|
|
uint32_t old_vrf_id;
|
|
|
|
struct nhrc *nhrc;
|
|
|
|
};
|
|
|
|
|
|
|
|
static int pbr_nht_nhrc_vrf_change(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct nhrc *nhrc = b->data;
|
|
|
|
struct nhrc_vrf_info *nhrcvi = data;
|
|
|
|
|
|
|
|
if (nhrc->nexthop.vrf_id == nhrcvi->old_vrf_id) {
|
|
|
|
nhrcvi->nhrc = nhrc;
|
|
|
|
return HASHWALK_ABORT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return HASHWALK_CONTINUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pbr_nht_individual_nexthop_vrf_handle(struct hash_bucket *b,
|
|
|
|
void *data)
|
2020-08-20 16:34:38 +02:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct pbr_nht_individual *pnhi = data;
|
|
|
|
|
2020-08-24 21:14:44 +02:00
|
|
|
if (pnhc->looked_at == true)
|
|
|
|
return HASHWALK_CONTINUE;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhc->nexthop.vrf_id == VRF_DEFAULT)
|
2020-08-24 21:14:44 +02:00
|
|
|
return HASHWALK_CONTINUE;
|
2020-08-20 16:34:38 +02:00
|
|
|
|
2020-08-24 21:14:44 +02:00
|
|
|
if (strncmp(pnhc->vrf_name, pbr_vrf_name(pnhi->pbr_vrf),
|
|
|
|
sizeof(pnhc->vrf_name))
|
|
|
|
== 0) {
|
2020-08-20 16:34:38 +02:00
|
|
|
pnhi->pnhc = pnhc;
|
2020-08-24 21:14:44 +02:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhc->nexthop.vrf_id != pbr_vrf_id(pnhi->pbr_vrf)) {
|
2020-08-24 21:14:44 +02:00
|
|
|
struct nhrc_vrf_info nhrcvi;
|
|
|
|
|
|
|
|
memset(&nhrcvi, 0, sizeof(nhrcvi));
|
|
|
|
nhrcvi.pbr_vrf = pnhi->pbr_vrf;
|
2020-08-24 21:25:34 +02:00
|
|
|
nhrcvi.old_vrf_id = pnhc->nexthop.vrf_id;
|
2020-08-24 21:14:44 +02:00
|
|
|
|
|
|
|
pnhi->nhr_matched = true;
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhi->old_vrf_id = pnhc->nexthop.vrf_id;
|
2020-08-24 21:14:44 +02:00
|
|
|
|
|
|
|
do {
|
|
|
|
nhrcvi.nhrc = NULL;
|
|
|
|
hash_walk(pbr_nhrc_hash,
|
|
|
|
pbr_nht_nhrc_vrf_change, &nhrcvi);
|
|
|
|
if (nhrcvi.nhrc) {
|
|
|
|
hash_release(pbr_nhrc_hash,
|
|
|
|
nhrcvi.nhrc);
|
|
|
|
nhrcvi.nhrc->nexthop.vrf_id =
|
|
|
|
pbr_vrf_id(pnhi->pbr_vrf);
|
*: remove the checking returned value for hash_get()
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
2022-04-21 08:37:12 +02:00
|
|
|
(void)hash_get(pbr_nhrc_hash,
|
|
|
|
nhrcvi.nhrc,
|
|
|
|
hash_alloc_intern);
|
2020-08-24 21:14:44 +02:00
|
|
|
pbr_send_rnh(&nhrcvi.nhrc->nexthop, true);
|
|
|
|
}
|
|
|
|
} while (nhrcvi.nhrc);
|
|
|
|
}
|
|
|
|
|
|
|
|
pnhc->looked_at = true;
|
|
|
|
return HASHWALK_ABORT;
|
2020-08-20 16:34:38 +02:00
|
|
|
}
|
2020-08-24 21:14:44 +02:00
|
|
|
|
|
|
|
return HASHWALK_CONTINUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nht_clear_looked_at(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
|
|
|
|
pnhc->looked_at = false;
|
2020-08-20 16:34:38 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nht_nexthop_vrf_handle(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
|
|
|
struct pbr_vrf *pbr_vrf = data;
|
|
|
|
struct pbr_nht_individual pnhi = {};
|
|
|
|
|
2020-08-24 21:14:44 +02:00
|
|
|
hash_iterate(pnhgc->nhh, pbr_nht_clear_looked_at, NULL);
|
|
|
|
memset(&pnhi, 0, sizeof(pnhi));
|
|
|
|
pnhi.pbr_vrf = pbr_vrf;
|
2020-08-20 16:34:38 +02:00
|
|
|
do {
|
2020-08-24 21:14:44 +02:00
|
|
|
struct pbr_nexthop_cache *pnhc;
|
|
|
|
|
|
|
|
pnhi.pnhc = NULL;
|
|
|
|
hash_walk(pnhgc->nhh, pbr_nht_individual_nexthop_vrf_handle,
|
|
|
|
&pnhi);
|
2020-08-20 16:34:38 +02:00
|
|
|
|
|
|
|
if (!pnhi.pnhc)
|
|
|
|
continue;
|
|
|
|
|
2020-08-24 21:14:44 +02:00
|
|
|
pnhc = pnhi.pnhc;
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhc->nexthop.vrf_id = pnhi.old_vrf_id;
|
2020-08-20 16:34:38 +02:00
|
|
|
pnhi.pnhc = hash_release(pnhgc->nhh, pnhi.pnhc);
|
2020-08-24 21:14:44 +02:00
|
|
|
if (pnhi.pnhc) {
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhi.pnhc->nexthop.vrf_id = pbr_vrf_id(pbr_vrf);
|
2020-08-20 16:34:38 +02:00
|
|
|
|
*: remove the checking returned value for hash_get()
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
2022-04-21 08:37:12 +02:00
|
|
|
(void)hash_get(pnhgc->nhh, pnhi.pnhc,
|
|
|
|
hash_alloc_intern);
|
2020-08-24 21:14:44 +02:00
|
|
|
} else
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhc->nexthop.vrf_id = pbr_vrf_id(pbr_vrf);
|
2020-08-20 16:34:38 +02:00
|
|
|
|
|
|
|
pbr_map_check_vrf_nh_group_change(pnhgc->name, pbr_vrf,
|
2020-08-24 21:14:44 +02:00
|
|
|
pnhi.old_vrf_id);
|
2020-08-20 16:34:38 +02:00
|
|
|
} while (pnhi.pnhc);
|
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_vrf_update(struct pbr_vrf *pbr_vrf)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_nexthop_vrf_handle, pbr_vrf);
|
|
|
|
}
|
|
|
|
|
2020-08-20 18:55:45 +02:00
|
|
|
static void pbr_nht_individual_nexthop_interface_handle(struct hash_bucket *b,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct pbr_nht_individual *pnhi = data;
|
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
if (pnhc->nexthop.ifindex == 0)
|
2020-08-20 18:55:45 +02:00
|
|
|
return;
|
|
|
|
|
|
|
|
if ((strncmp(pnhc->intf_name, pnhi->ifp->name, sizeof(pnhc->intf_name))
|
|
|
|
== 0)
|
2020-08-24 21:25:34 +02:00
|
|
|
&& pnhc->nexthop.ifindex != pnhi->ifp->ifindex)
|
2020-08-20 18:55:45 +02:00
|
|
|
pnhi->pnhc = pnhc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pbr_nht_nexthop_interface_handle(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
|
|
|
struct interface *ifp = data;
|
|
|
|
struct pbr_nht_individual pnhi = {};
|
|
|
|
struct nhrc *nhrc;
|
|
|
|
uint32_t old_ifindex;
|
|
|
|
|
|
|
|
do {
|
|
|
|
memset(&pnhi, 0, sizeof(pnhi));
|
|
|
|
pnhi.ifp = ifp;
|
|
|
|
hash_iterate(pnhgc->nhh,
|
|
|
|
pbr_nht_individual_nexthop_interface_handle,
|
|
|
|
&pnhi);
|
|
|
|
|
|
|
|
if (!pnhi.pnhc)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pnhi.pnhc = hash_release(pnhgc->nhh, pnhi.pnhc);
|
2020-08-24 21:25:34 +02:00
|
|
|
old_ifindex = pnhi.pnhc->nexthop.ifindex;
|
2020-08-20 18:55:45 +02:00
|
|
|
|
2020-08-24 21:25:34 +02:00
|
|
|
nhrc = hash_lookup(pbr_nhrc_hash, &pnhi.pnhc->nexthop);
|
2020-08-20 18:55:45 +02:00
|
|
|
if (nhrc) {
|
|
|
|
hash_release(pbr_nhrc_hash, nhrc);
|
|
|
|
nhrc->nexthop.ifindex = ifp->ifindex;
|
*: remove the checking returned value for hash_get()
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
2022-04-21 08:37:12 +02:00
|
|
|
(void)hash_get(pbr_nhrc_hash, nhrc, hash_alloc_intern);
|
2020-08-20 18:55:45 +02:00
|
|
|
}
|
2020-08-24 21:25:34 +02:00
|
|
|
pnhi.pnhc->nexthop.ifindex = ifp->ifindex;
|
2020-08-20 18:55:45 +02:00
|
|
|
|
*: remove the checking returned value for hash_get()
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
2022-04-21 08:37:12 +02:00
|
|
|
(void)hash_get(pnhgc->nhh, pnhi.pnhc, hash_alloc_intern);
|
2020-08-20 18:55:45 +02:00
|
|
|
|
|
|
|
pbr_map_check_interface_nh_group_change(pnhgc->name, ifp,
|
|
|
|
old_ifindex);
|
|
|
|
} while (pnhi.pnhc);
|
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_interface_update(struct interface *ifp)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_nexthop_interface_handle, ifp);
|
|
|
|
}
|
|
|
|
|
2019-02-14 23:00:15 +01:00
|
|
|
static void
|
2020-02-27 02:03:34 +01:00
|
|
|
pbr_nht_individual_nexthop_interface_update_lookup(struct hash_bucket *b,
|
2019-02-14 23:00:15 +01:00
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct pbr_nht_individual *pnhi = data;
|
|
|
|
bool old_valid;
|
|
|
|
|
|
|
|
old_valid = pnhc->valid;
|
|
|
|
|
2019-09-11 20:22:55 +02:00
|
|
|
pbr_nht_individual_nexthop_update(pnhc, pnhi);
|
2019-02-14 23:00:15 +01:00
|
|
|
|
2021-02-14 15:35:07 +01:00
|
|
|
DEBUGD(&pbr_dbg_nht, " Found %s: old: %d new: %d", pnhi->ifp->name,
|
2019-02-14 23:00:15 +01:00
|
|
|
old_valid, pnhc->valid);
|
|
|
|
|
|
|
|
if (pnhc->valid)
|
2020-09-01 18:34:48 +02:00
|
|
|
pnhi->valid = true;
|
2019-02-14 23:00:15 +01:00
|
|
|
}
|
|
|
|
|
2020-02-27 02:03:34 +01:00
|
|
|
static void pbr_nht_nexthop_interface_update_lookup(struct hash_bucket *b,
|
2019-02-14 23:00:15 +01:00
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
2019-09-11 20:22:55 +02:00
|
|
|
struct pbr_nht_individual pnhi = {};
|
2020-12-10 16:18:00 +01:00
|
|
|
struct nexthop_group nhg = {};
|
2019-02-14 23:00:15 +01:00
|
|
|
bool old_valid;
|
|
|
|
|
|
|
|
old_valid = pnhgc->valid;
|
|
|
|
|
|
|
|
pnhi.ifp = data;
|
2020-09-01 18:34:48 +02:00
|
|
|
pnhi.valid = false;
|
2019-02-14 23:00:15 +01:00
|
|
|
hash_iterate(pnhgc->nhh,
|
|
|
|
pbr_nht_individual_nexthop_interface_update_lookup, &pnhi);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If any of the specified nexthops are valid we are valid
|
|
|
|
*/
|
2020-09-01 18:34:48 +02:00
|
|
|
pnhgc->valid = pnhi.valid;
|
2019-02-14 23:00:15 +01:00
|
|
|
|
2020-12-10 16:18:00 +01:00
|
|
|
pbr_nexthop_group_cache_to_nexthop_group(&nhg, pnhgc);
|
|
|
|
|
|
|
|
if (pnhgc->valid)
|
|
|
|
pbr_nht_install_nexthop_group(pnhgc, nhg);
|
|
|
|
else
|
|
|
|
pbr_nht_uninstall_nexthop_group(pnhgc, nhg, 0);
|
|
|
|
|
|
|
|
nexthops_free(nhg.nexthop);
|
|
|
|
|
2019-02-14 23:00:15 +01:00
|
|
|
if (old_valid != pnhgc->valid)
|
|
|
|
pbr_map_check_nh_group_change(pnhgc->name);
|
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_nexthop_interface_update(struct interface *ifp)
|
|
|
|
{
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_nexthop_interface_update_lookup,
|
|
|
|
ifp);
|
|
|
|
}
|
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
static bool pbr_nhg_allocated_id_hash_equal(const void *arg1, const void *arg2)
|
|
|
|
{
|
|
|
|
const struct pbr_nexthop_group_cache *left, *right;
|
|
|
|
|
|
|
|
left = (const struct pbr_nexthop_group_cache *)arg1;
|
|
|
|
right = (const struct pbr_nexthop_group_cache *)arg2;
|
|
|
|
|
|
|
|
return left->table_id == right->table_id;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t pbr_nhg_allocated_id_hash_key(const void *arg)
|
|
|
|
{
|
|
|
|
const struct pbr_nexthop_group_cache *nhgc = arg;
|
|
|
|
|
|
|
|
/* table_id makes elements in this hash unique */
|
|
|
|
return nhgc->table_id;
|
|
|
|
}
|
|
|
|
|
2019-05-14 22:19:07 +02:00
|
|
|
static uint32_t pbr_nhg_hash_key(const void *arg)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
2019-05-14 22:19:07 +02:00
|
|
|
const struct pbr_nexthop_group_cache *nhgc = arg;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
return jhash(&nhgc->name, strlen(nhgc->name), 0x52c34a96);
|
|
|
|
}
|
|
|
|
|
2018-10-17 21:27:12 +02:00
|
|
|
static bool pbr_nhg_hash_equal(const void *arg1, const void *arg2)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
const struct pbr_nexthop_group_cache *nhgc1 =
|
|
|
|
(const struct pbr_nexthop_group_cache *)arg1;
|
|
|
|
const struct pbr_nexthop_group_cache *nhgc2 =
|
|
|
|
(const struct pbr_nexthop_group_cache *)arg2;
|
|
|
|
|
|
|
|
return !strcmp(nhgc1->name, nhgc2->name);
|
|
|
|
}
|
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
uint32_t pbr_nht_find_next_unallocated_table_id(void)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
2021-05-15 04:53:56 +02:00
|
|
|
struct pbr_nexthop_group_cache iter;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
/*
|
|
|
|
* Find the smallest unallocated table id
|
|
|
|
* This can be non-trivial considering nhg removals / shifting upper &
|
|
|
|
* lower bounds, so start at the lowest in the range and continue until
|
|
|
|
* an unallocated space is found
|
|
|
|
*/
|
|
|
|
for (iter.table_id = pbr_nhg_low_table;
|
|
|
|
iter.table_id < pbr_nhg_high_table; ++iter.table_id)
|
|
|
|
if (!hash_lookup(pbr_nhg_allocated_id_hash, &iter))
|
|
|
|
return iter.table_id;
|
|
|
|
|
|
|
|
/* Configured range is full, cannot install anywhere */
|
|
|
|
return 0;
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
bool pbr_nht_has_unallocated_table(void)
|
|
|
|
{
|
|
|
|
return !!pbr_next_unallocated_table_id;
|
|
|
|
}
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
2021-05-15 04:53:56 +02:00
|
|
|
void pbr_nht_update_next_unallocated_table_id(void)
|
|
|
|
{
|
|
|
|
pbr_next_unallocated_table_id =
|
|
|
|
pbr_nht_find_next_unallocated_table_id();
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t pbr_nht_reserve_next_table_id(struct pbr_nexthop_group_cache *nhgc)
|
|
|
|
{
|
|
|
|
/* Nothing to reserve if all tables in range already used */
|
|
|
|
if (!pbr_next_unallocated_table_id)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
return 0;
|
2021-05-15 04:53:56 +02:00
|
|
|
|
|
|
|
/* Reserve this table id */
|
|
|
|
nhgc->table_id = pbr_next_unallocated_table_id;
|
|
|
|
|
|
|
|
/* Mark table id as allocated in id-indexed hash */
|
*: remove the checking returned value for hash_get()
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
2022-04-21 08:37:12 +02:00
|
|
|
(void)hash_get(pbr_nhg_allocated_id_hash, nhgc, hash_alloc_intern);
|
2021-05-15 04:53:56 +02:00
|
|
|
|
|
|
|
/* Pre-compute the next unallocated table id */
|
|
|
|
pbr_nht_update_next_unallocated_table_id();
|
|
|
|
|
|
|
|
/* Present caller with reserved table id */
|
|
|
|
return nhgc->table_id;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_set_tableid_range(uint32_t low, uint32_t high)
|
|
|
|
{
|
|
|
|
pbr_nhg_low_table = low;
|
|
|
|
pbr_nhg_high_table = high;
|
2021-05-15 04:53:56 +02:00
|
|
|
|
|
|
|
/* Re-compute next unallocated id within new range */
|
|
|
|
pbr_nht_update_next_unallocated_table_id();
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_write_table_range(struct vty *vty)
|
|
|
|
{
|
|
|
|
if (pbr_nhg_low_table != PBR_NHT_DEFAULT_LOW_TABLEID
|
|
|
|
|| pbr_nhg_high_table != PBR_NHT_DEFAULT_HIGH_TABLEID) {
|
|
|
|
vty_out(vty, "pbr table range %u %u\n", pbr_nhg_low_table,
|
|
|
|
pbr_nhg_high_table);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t pbr_nht_get_next_rule(uint32_t seqno)
|
|
|
|
{
|
|
|
|
return seqno + pbr_nhg_low_rule - 1;
|
|
|
|
}
|
|
|
|
void pbr_nht_set_rule_range(uint32_t low, uint32_t high)
|
|
|
|
{
|
|
|
|
pbr_nhg_low_rule = low;
|
|
|
|
pbr_nhg_high_rule = high;
|
|
|
|
}
|
|
|
|
|
|
|
|
void pbr_nht_write_rule_range(struct vty *vty)
|
|
|
|
{
|
|
|
|
if (pbr_nhg_low_rule != PBR_NHT_DEFAULT_LOW_RULE
|
|
|
|
|| pbr_nhg_high_rule != PBR_NHT_DEFAULT_HIGH_RULE) {
|
|
|
|
vty_out(vty, "pbr rule range %u %u\n", pbr_nhg_low_rule,
|
|
|
|
pbr_nhg_high_rule);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t pbr_nht_get_table(const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache find;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
|
|
|
|
memset(&find, 0, sizeof(find));
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(find.name, sizeof(find.name), "%s", name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &find);
|
|
|
|
|
|
|
|
if (!pnhgc) {
|
|
|
|
DEBUGD(&pbr_dbg_nht,
|
|
|
|
"%s: Could not find nexthop-group cache w/ name '%s'",
|
2020-03-05 19:17:54 +01:00
|
|
|
__func__, name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
return 5000;
|
|
|
|
}
|
|
|
|
|
|
|
|
return pnhgc->table_id;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool pbr_nht_get_installed(const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache find;
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc;
|
|
|
|
|
|
|
|
memset(&find, 0, sizeof(find));
|
2018-04-18 00:20:53 +02:00
|
|
|
snprintf(find.name, sizeof(find.name), "%s", name);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
pnhgc = hash_lookup(pbr_nhg_hash, &find);
|
|
|
|
|
2018-03-15 16:56:07 +01:00
|
|
|
if (!pnhgc)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
return false;
|
|
|
|
|
|
|
|
return pnhgc->installed;
|
|
|
|
}
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nht_show_nhg_nexthops(struct hash_bucket *b, void *data)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
struct vty *vty = data;
|
|
|
|
|
2018-03-20 21:43:54 +01:00
|
|
|
vty_out(vty, "\tValid: %d ", pnhc->valid);
|
2020-08-24 21:25:34 +02:00
|
|
|
nexthop_group_write_nexthop(vty, &pnhc->nexthop);
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|
|
|
|
|
2020-05-20 16:49:54 +02:00
|
|
|
static void pbr_nht_json_nhg_nexthops(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_cache *pnhc = b->data;
|
|
|
|
json_object *all_hops = data;
|
|
|
|
json_object *this_hop;
|
|
|
|
|
|
|
|
this_hop = json_object_new_object();
|
2020-08-24 21:25:34 +02:00
|
|
|
nexthop_group_json_nexthop(this_hop, &pnhc->nexthop);
|
2020-05-26 22:44:46 +02:00
|
|
|
json_object_boolean_add(this_hop, "valid", pnhc->valid);
|
2020-05-20 16:49:54 +02:00
|
|
|
|
|
|
|
json_object_array_add(all_hops, this_hop);
|
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
struct pbr_nht_show {
|
|
|
|
struct vty *vty;
|
2020-05-20 16:49:54 +02:00
|
|
|
json_object *json;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
const char *name;
|
|
|
|
};
|
|
|
|
|
2019-02-19 16:46:52 +01:00
|
|
|
static void pbr_nht_show_nhg(struct hash_bucket *b, void *data)
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
|
|
|
struct pbr_nht_show *pns = data;
|
|
|
|
struct vty *vty;
|
|
|
|
|
|
|
|
if (pns->name && strcmp(pns->name, pnhgc->name) != 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
vty = pns->vty;
|
|
|
|
vty_out(vty, "Nexthop-Group: %s Table: %u Valid: %d Installed: %d\n",
|
|
|
|
pnhgc->name, pnhgc->table_id, pnhgc->valid, pnhgc->installed);
|
|
|
|
|
|
|
|
hash_iterate(pnhgc->nhh, pbr_nht_show_nhg_nexthops, vty);
|
|
|
|
}
|
|
|
|
|
2020-05-20 16:49:54 +02:00
|
|
|
static void pbr_nht_json_nhg(struct hash_bucket *b, void *data)
|
|
|
|
{
|
|
|
|
struct pbr_nexthop_group_cache *pnhgc = b->data;
|
|
|
|
struct pbr_nht_show *pns = data;
|
|
|
|
json_object *j, *this_group, *group_hops;
|
|
|
|
|
|
|
|
if (pns->name && strcmp(pns->name, pnhgc->name) != 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
j = pns->json;
|
|
|
|
this_group = json_object_new_object();
|
|
|
|
|
|
|
|
if (!j || !this_group)
|
|
|
|
return;
|
|
|
|
|
|
|
|
json_object_int_add(this_group, "id", pnhgc->table_id);
|
2020-05-21 21:18:34 +02:00
|
|
|
json_object_string_add(this_group, "name", pnhgc->name);
|
2020-05-26 22:44:46 +02:00
|
|
|
json_object_boolean_add(this_group, "valid", pnhgc->valid);
|
|
|
|
json_object_boolean_add(this_group, "installed", pnhgc->installed);
|
2020-05-20 16:49:54 +02:00
|
|
|
|
|
|
|
group_hops = json_object_new_array();
|
|
|
|
|
|
|
|
if (group_hops) {
|
|
|
|
hash_iterate(pnhgc->nhh, pbr_nht_json_nhg_nexthops, group_hops);
|
|
|
|
json_object_object_add(this_group, "nexthops", group_hops);
|
|
|
|
}
|
|
|
|
|
2020-05-21 21:33:06 +02:00
|
|
|
json_object_array_add(j, this_group);
|
2020-05-20 16:49:54 +02:00
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
void pbr_nht_show_nexthop_group(struct vty *vty, const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_nht_show pns;
|
|
|
|
|
|
|
|
pns.vty = vty;
|
|
|
|
pns.name = name;
|
|
|
|
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_show_nhg, &pns);
|
|
|
|
}
|
|
|
|
|
2020-05-20 16:49:54 +02:00
|
|
|
void pbr_nht_json_nexthop_group(json_object *j, const char *name)
|
|
|
|
{
|
|
|
|
struct pbr_nht_show pns;
|
|
|
|
|
|
|
|
pns.name = name;
|
|
|
|
pns.json = j;
|
|
|
|
|
|
|
|
hash_iterate(pbr_nhg_hash, pbr_nht_json_nhg, &pns);
|
|
|
|
}
|
|
|
|
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
void pbr_nht_init(void)
|
|
|
|
{
|
|
|
|
pbr_nhg_hash = hash_create_size(
|
|
|
|
16, pbr_nhg_hash_key, pbr_nhg_hash_equal, "PBR NHG Cache Hash");
|
2018-03-19 14:04:17 +01:00
|
|
|
pbr_nhrc_hash =
|
2019-05-14 22:19:07 +02:00
|
|
|
hash_create_size(16, (unsigned int (*)(const void *))nexthop_hash,
|
2018-03-19 14:04:17 +01:00
|
|
|
pbr_nhrc_hash_equal, "PBR NH Hash");
|
2021-05-15 04:53:56 +02:00
|
|
|
pbr_nhg_allocated_id_hash = hash_create_size(
|
|
|
|
16, pbr_nhg_allocated_id_hash_key,
|
|
|
|
pbr_nhg_allocated_id_hash_equal, "PBR Allocated Table Hash");
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
|
|
|
|
pbr_nhg_low_table = PBR_NHT_DEFAULT_LOW_TABLEID;
|
|
|
|
pbr_nhg_high_table = PBR_NHT_DEFAULT_HIGH_TABLEID;
|
|
|
|
pbr_nhg_low_rule = PBR_NHT_DEFAULT_LOW_RULE;
|
|
|
|
pbr_nhg_high_rule = PBR_NHT_DEFAULT_HIGH_RULE;
|
2021-05-15 04:53:56 +02:00
|
|
|
|
|
|
|
/* First unallocated table is lowest in range on init */
|
|
|
|
pbr_next_unallocated_table_id = PBR_NHT_DEFAULT_LOW_TABLEID;
|
pbrd: Add PBR to FRR
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-01-23 19:11:36 +01:00
|
|
|
}
|