matthieu/frr
1
0
Fork 0
forked from Mirror/frr
Code Pull requests Activity
frr/isisd/isis_nb.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1417 lines
44 KiB
C
Raw Normal View History

*: auto-convert to SPDX License IDs Done with a combination of regex'ing and banging my head against a wall. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2023-02-08 13:17:09 +01:00
// SPDX-License-Identifier: GPL-2.0-or-later
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
/*
* Copyright (C) 2018 Volta Networks
* Emanuele Di Pascale
*/
#include <zebra.h>
#include "northbound.h"
#include "libfrr.h"
#include "isisd/isis_nb.h"
/* clang-format off */
const struct frr_yang_module_info frr_isisd_info = {
.name = "frr-isisd",
.nodes = {
{
.xpath = "/frr-isisd:isis/instance",
.cbs = {
.cli_show = cli_show_router_isis,
*: explicitly print "exit" at the end of every node config There is a possibility that the same line can be matched as a command in some node and its parent node. In this case, when reading the config, this line is always executed as a command of the child node. For example, with the following config: ``` router ospf network 193.168.0.0/16 area 0 ! mpls ldp discovery hello interval 111 ! ``` Line `mpls ldp` is processed as command `mpls ldp-sync` inside the `router ospf` node. This leads to a complete loss of `mpls ldp` node configuration. To eliminate this issue and all possible similar issues, let's print an explicit "exit" at the end of every node config. This commit also changes indentation for a couple of existing exit commands so that all existing commands are on the same level as their corresponding node-entering commands. Fixes #9206. Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
2021-08-08 21:38:50 +02:00
.cli_show_end = cli_show_router_isis_end,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.create = isis_instance_create,
.destroy = isis_instance_destroy,
},
.priority = NB_DFLT_PRIORITY - 1,
},
{
.xpath = "/frr-isisd:isis/instance/is-type",
.cbs = {
.cli_show = cli_show_isis_is_type,
.modify = isis_instance_is_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/area-address",
.cbs = {
.cli_show = cli_show_isis_area_address,
.create = isis_instance_area_address_create,
.destroy = isis_instance_area_address_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/dynamic-hostname",
.cbs = {
.cli_show = cli_show_isis_dynamic_hostname,
.modify = isis_instance_dynamic_hostname_modify,
},
},
isisd: Fix Attach-bit processing The purpose of the Attach-bit is to accomplish inter-area routing. In other venders, the Attached-bit is automatically set when a router is configured as a L1|L2 router and has two adjacencies. When a L1 router receives a LSP with the Attached-bit set it is supposed to create a default route pointing toward the neighbor to provide a default path out of the L1 area. ISIS implementation has been fixed to support the above definition: Setting the Attach-bit is now the default behavior and we allow the user to turn it off. We will only set the Default Attach-bit when creating a L1 LSP, if we are a L1|L2 router and have a L2 adjacency up. When a L1 router receives a LSP with the Attach-bit set, we will create a default route pointing to the L1|L2 router as the nexthop. The default route will be removed if the LSP is received with the Attach-bit cleared. Signed-off-by: Lynne Morrison <lynne@voltanet.io>
2020-12-24 19:29:42 +01:00
{
.xpath = "/frr-isisd:isis/instance/attach-send",
.cbs = {
.cli_show = cli_show_isis_attached_send,
.modify = isis_instance_attached_send_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/attach-receive-ignore",
.cbs = {
.cli_show = cli_show_isis_attached_receive,
.modify = isis_instance_attached_receive_modify,
},
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/attached",
.cbs = {
.modify = isis_instance_attached_modify,
},
},
{
isisd: Add set-overload on-startup CLI/YANG support Before: r1# conf r1(config)# router isis <area-tag> r1(config-router)# set-overload-bit <cr> r1(config-router)# end After: r1# conf r1(config)# router isis <area-tag> r1(config-router)# set-overload-bit <cr> on-startup Set overload bit on startup r1(config-router)# set-overload-bit on-startup (0-86400) Set overload time in seconds r1(config-router)# set-overload-bit on-startup 300 r1(config-router)# end Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
2022-09-15 20:50:27 +02:00
.xpath = "/frr-isisd:isis/instance/overload/enabled",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.cli_show = cli_show_isis_overload,
isisd: Add set-overload on-startup CLI/YANG support Before: r1# conf r1(config)# router isis <area-tag> r1(config-router)# set-overload-bit <cr> r1(config-router)# end After: r1# conf r1(config)# router isis <area-tag> r1(config-router)# set-overload-bit <cr> on-startup Set overload bit on startup r1(config-router)# set-overload-bit on-startup (0-86400) Set overload time in seconds r1(config-router)# set-overload-bit on-startup 300 r1(config-router)# end Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
2022-09-15 20:50:27 +02:00
.modify = isis_instance_overload_enabled_modify,
}
},
{
.xpath = "/frr-isisd:isis/instance/overload/on-startup",
.cbs = {
.cli_show = cli_show_isis_overload_on_startup,
.modify = isis_instance_overload_on_startup_modify,
}
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
isisd: Add advertise-high-metrics CLI/YANG support, modify show output New config and show functionality: r1# conf r1(config)# router isis 1 r1(config-router)# advertise-high-metrics Advertise high metric value on all interfaces area-password Configure the authentication password for an area ... r1(config-router)# advertise-high-metrics r1(config-router)# end r1# show isis summary ... Area 1: Net: 49.0001.1720.1700.0002.00 TX counters per PDU type: L2 IIH: 1 P2P IIH: 36 LSP RXMT: 0 RX counters per PDU type: Advertise high metrics: Enabled Level-2: ... r1# conf r1(config)# router isis 1 r1(config-router)# no advertise-high-metrics r1(config-router)# end r1# show isis summary ... Area 1: Net: 49.0001.1720.1700.0002.00 TX counters per PDU type: L2 IIH: 1 P2P IIH: 45 LSP RXMT: 0 RX counters per PDU type: Advertise high metrics: Disabled Level-2: ... r1# Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
2023-01-06 19:06:23 +01:00
{
.xpath = "/frr-isisd:isis/instance/advertise-high-metrics",
.cbs = {
.cli_show = cli_show_advertise_high_metrics,
.modify = isis_instance_advertise_high_metrics_modify,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/metric-style",
.cbs = {
.cli_show = cli_show_isis_metric_style,
.modify = isis_instance_metric_style_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/purge-originator",
.cbs = {
.cli_show = cli_show_isis_purge_origin,
.modify = isis_instance_purge_originator_modify,
},
},
lib,vtysh,isisd,yang: algo cli/yang/callbacks Define the IS-IS flex-algo structure in yang, the CLI configuration commands and the skeletons of frontend and backend functions that are called by the CLI code. Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com> Signed-off-by: Eric Kinzie <ekinzie@labn.net> Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
2021-12-18 09:11:58 +01:00
{
.xpath = "/frr-isisd:isis/instance/admin-group-send-zero",
.cbs = {
.cli_show = cli_show_isis_admin_group_send_zero,
.modify = isis_instance_admin_group_send_zero_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/asla-legacy-flag",
.cbs = {
.cli_show = cli_show_isis_asla_legacy_flag,
.modify = isis_instance_asla_legacy_flag_modify,
},
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/lsp/mtu",
.cbs = {
.cli_show = cli_show_isis_lsp_mtu,
.modify = isis_instance_lsp_mtu_modify,
},
},
isisd,doc: Add support for isis advertise-passive-only Signed-off-by: Diogo Oliveira <14191454+dorDiogo@users.noreply.github.com>
2023-02-14 22:50:06 +01:00
{
.xpath = "/frr-isisd:isis/instance/advertise-passive-only",
.cbs = {
.cli_show = cli_show_advertise_passive_only,
.modify = isis_instance_advertise_passive_only_modify,
},
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.cli_show = cli_show_isis_lsp_timers,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-1/refresh-interval",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.modify = isis_instance_lsp_refresh_interval_level_1_modify,
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-1/maximum-lifetime",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.modify = isis_instance_lsp_maximum_lifetime_level_1_modify,
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-1/generation-interval",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.modify = isis_instance_lsp_generation_interval_level_1_modify,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-2/refresh-interval",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.modify = isis_instance_lsp_refresh_interval_level_2_modify,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-2/maximum-lifetime",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.modify = isis_instance_lsp_maximum_lifetime_level_2_modify,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
},
{
isisd, yang: unified lsp-timers command Yang constraints enforced by the northbound callbacks require that the maximum lifetime be >= than (refresh interval + 300). When we are moving from one config to another through frr-reload.py, we issue a number of vtysh -c commands ('no lsp-refresh-interval level-1 500', 'no max-lsp-lifetime level-1 1000'), which reset these parameters to their default values, respectively 900 and 1200. Depending on the actual values in the current config, the order in which these commands are sent might be the wrong one, in that we hit an invalid intermediate state and make vtysh (and by extension frr-reload.py) return an error. As a workaround, let's add a one-liner command that sets all these inter-related parameters in one go, and make isisd display them as a single line too, so that the diff will be computed as a single command. The old individual commands are kept to ensure backwards compatibility. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2020-04-06 17:05:41 +02:00
.xpath = "/frr-isisd:isis/instance/lsp/timers/level-2/generation-interval",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.modify = isis_instance_lsp_generation_interval_level_2_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay",
.cbs = {
.apply_finish = ietf_backoff_delay_apply_finish,
.cli_show = cli_show_isis_spf_ietf_backoff,
.create = isis_instance_spf_ietf_backoff_delay_create,
.destroy = isis_instance_spf_ietf_backoff_delay_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay/init-delay",
.cbs = {
.modify = isis_instance_spf_ietf_backoff_delay_init_delay_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay/short-delay",
.cbs = {
.modify = isis_instance_spf_ietf_backoff_delay_short_delay_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay/long-delay",
.cbs = {
.modify = isis_instance_spf_ietf_backoff_delay_long_delay_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay/hold-down",
.cbs = {
.modify = isis_instance_spf_ietf_backoff_delay_hold_down_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/ietf-backoff-delay/time-to-learn",
.cbs = {
.modify = isis_instance_spf_ietf_backoff_delay_time_to_learn_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/minimum-interval",
.cbs = {
.cli_show = cli_show_isis_spf_min_interval,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/minimum-interval/level-1",
.cbs = {
.modify = isis_instance_spf_minimum_interval_level_1_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/spf/minimum-interval/level-2",
.cbs = {
.modify = isis_instance_spf_minimum_interval_level_2_modify,
},
},
yang, isisd: add LFA nodes, NB skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-06 03:55:35 +01:00
{
.xpath = "/frr-isisd:isis/instance/spf/prefix-priorities/critical/access-list-name",
.cbs = {
.cli_show = cli_show_isis_spf_prefix_priority,
.modify = isis_instance_spf_prefix_priorities_critical_access_list_name_modify,
.destroy = isis_instance_spf_prefix_priorities_critical_access_list_name_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/spf/prefix-priorities/high/access-list-name",
.cbs = {
.cli_show = cli_show_isis_spf_prefix_priority,
.modify = isis_instance_spf_prefix_priorities_high_access_list_name_modify,
.destroy = isis_instance_spf_prefix_priorities_high_access_list_name_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/spf/prefix-priorities/medium/access-list-name",
.cbs = {
.cli_show = cli_show_isis_spf_prefix_priority,
.modify = isis_instance_spf_prefix_priorities_medium_access_list_name_modify,
.destroy = isis_instance_spf_prefix_priorities_medium_access_list_name_destroy,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/area-password",
.cbs = {
.apply_finish = area_password_apply_finish,
.cli_show = cli_show_isis_area_pwd,
.create = isis_instance_area_password_create,
.destroy = isis_instance_area_password_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/area-password/password",
.cbs = {
.modify = isis_instance_area_password_password_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/area-password/password-type",
.cbs = {
.modify = isis_instance_area_password_password_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/area-password/authenticate-snp",
.cbs = {
.modify = isis_instance_area_password_authenticate_snp_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/domain-password",
.cbs = {
.apply_finish = domain_password_apply_finish,
.cli_show = cli_show_isis_domain_pwd,
.create = isis_instance_domain_password_create,
.destroy = isis_instance_domain_password_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/domain-password/password",
.cbs = {
.modify = isis_instance_domain_password_password_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/domain-password/password-type",
.cbs = {
.modify = isis_instance_domain_password_password_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/domain-password/authenticate-snp",
.cbs = {
.modify = isis_instance_domain_password_authenticate_snp_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv4",
.cbs = {
.apply_finish = default_info_origin_ipv4_apply_finish,
.cli_show = cli_show_isis_def_origin_ipv4,
.create = isis_instance_default_information_originate_ipv4_create,
.destroy = isis_instance_default_information_originate_ipv4_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv4/always",
.cbs = {
.modify = isis_instance_default_information_originate_ipv4_always_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv4/route-map",
.cbs = {
.destroy = isis_instance_default_information_originate_ipv4_route_map_destroy,
.modify = isis_instance_default_information_originate_ipv4_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv4/metric",
.cbs = {
.modify = isis_instance_default_information_originate_ipv4_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv6",
.cbs = {
.apply_finish = default_info_origin_ipv6_apply_finish,
.cli_show = cli_show_isis_def_origin_ipv6,
.create = isis_instance_default_information_originate_ipv6_create,
.destroy = isis_instance_default_information_originate_ipv6_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv6/always",
.cbs = {
.modify = isis_instance_default_information_originate_ipv6_always_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv6/route-map",
.cbs = {
.destroy = isis_instance_default_information_originate_ipv6_route_map_destroy,
.modify = isis_instance_default_information_originate_ipv6_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/default-information-originate/ipv6/metric",
.cbs = {
.modify = isis_instance_default_information_originate_ipv6_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4",
.cbs = {
.apply_finish = redistribute_ipv4_apply_finish,
.cli_show = cli_show_isis_redistribute_ipv4,
.create = isis_instance_redistribute_ipv4_create,
.destroy = isis_instance_redistribute_ipv4_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4/route-map",
.cbs = {
.destroy = isis_instance_redistribute_ipv4_route_map_destroy,
.modify = isis_instance_redistribute_ipv4_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4/metric",
isisd: add redistribute table identifier in nb configuration The yang model does not handle the table identifier in IS-IS. For each redistributed each address family, a new list of table elements is added to store the table identifier to redistribute, and also the optional metric and route-map values for each table identifier. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
2023-07-03 17:15:05 +02:00
.cbs = {
.destroy = isis_instance_redistribute_ipv4_metric_destroy,
.modify = isis_instance_redistribute_ipv4_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4/table",
.cbs = {
.cli_show = cli_show_isis_redistribute_ipv4_table,
.cli_cmp = cli_cmp_isis_redistribute_table,
.create = isis_instance_redistribute_ipv4_table_create,
.destroy = isis_instance_redistribute_ipv4_table_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4/table/route-map",
.cbs = {
.destroy = isis_instance_redistribute_ipv4_route_map_destroy,
.modify = isis_instance_redistribute_ipv4_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv4/table/metric",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.modify = isis_instance_redistribute_ipv4_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6",
.cbs = {
.apply_finish = redistribute_ipv6_apply_finish,
.cli_show = cli_show_isis_redistribute_ipv6,
.create = isis_instance_redistribute_ipv6_create,
.destroy = isis_instance_redistribute_ipv6_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6/route-map",
.cbs = {
.destroy = isis_instance_redistribute_ipv6_route_map_destroy,
.modify = isis_instance_redistribute_ipv6_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6/metric",
isisd: add redistribute table identifier in nb configuration The yang model does not handle the table identifier in IS-IS. For each redistributed each address family, a new list of table elements is added to store the table identifier to redistribute, and also the optional metric and route-map values for each table identifier. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
2023-07-03 17:15:05 +02:00
.cbs = {
.destroy = isis_instance_redistribute_ipv6_metric_destroy,
.modify = isis_instance_redistribute_ipv6_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6/table",
.cbs = {
.cli_show = cli_show_isis_redistribute_ipv6_table,
.cli_cmp = cli_cmp_isis_redistribute_table,
.create = isis_instance_redistribute_ipv6_table_create,
.destroy = isis_instance_redistribute_ipv6_table_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6/table/route-map",
.cbs = {
.destroy = isis_instance_redistribute_ipv6_route_map_destroy,
.modify = isis_instance_redistribute_ipv6_route_map_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/redistribute/ipv6/table/metric",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
.modify = isis_instance_redistribute_ipv6_metric_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv4-multicast",
.cbs = {
.cli_show = cli_show_isis_mt_ipv4_multicast,
.create = isis_instance_multi_topology_ipv4_multicast_create,
.destroy = isis_instance_multi_topology_ipv4_multicast_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv4-multicast/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv4_multicast_overload_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv4-management",
.cbs = {
.cli_show = cli_show_isis_mt_ipv4_mgmt,
.create = isis_instance_multi_topology_ipv4_management_create,
.destroy = isis_instance_multi_topology_ipv4_management_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv4-management/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv4_management_overload_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-unicast",
.cbs = {
.cli_show = cli_show_isis_mt_ipv6_unicast,
.create = isis_instance_multi_topology_ipv6_unicast_create,
.destroy = isis_instance_multi_topology_ipv6_unicast_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-unicast/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv6_unicast_overload_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-multicast",
.cbs = {
.cli_show = cli_show_isis_mt_ipv6_multicast,
.create = isis_instance_multi_topology_ipv6_multicast_create,
.destroy = isis_instance_multi_topology_ipv6_multicast_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-multicast/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv6_multicast_overload_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-management",
.cbs = {
.cli_show = cli_show_isis_mt_ipv6_mgmt,
.create = isis_instance_multi_topology_ipv6_management_create,
.destroy = isis_instance_multi_topology_ipv6_management_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-management/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv6_management_overload_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-dstsrc",
.cbs = {
.cli_show = cli_show_isis_mt_ipv6_dstsrc,
.create = isis_instance_multi_topology_ipv6_dstsrc_create,
.destroy = isis_instance_multi_topology_ipv6_dstsrc_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/multi-topology/ipv6-dstsrc/overload",
.cbs = {
.modify = isis_instance_multi_topology_ipv6_dstsrc_overload_modify,
},
},
yang, isisd: add LFA nodes, NB skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-06 03:55:35 +01:00
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-1/lfa/load-sharing",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_load_sharing,
.modify = isis_instance_fast_reroute_level_1_lfa_load_sharing_modify,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-1/lfa/priority-limit",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_priority_limit,
.modify = isis_instance_fast_reroute_level_1_lfa_priority_limit_modify,
.destroy = isis_instance_fast_reroute_level_1_lfa_priority_limit_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-1/lfa/tiebreaker",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_tiebreaker,
.create = isis_instance_fast_reroute_level_1_lfa_tiebreaker_create,
.destroy = isis_instance_fast_reroute_level_1_lfa_tiebreaker_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-1/lfa/tiebreaker/type",
.cbs = {
.modify = isis_instance_fast_reroute_level_1_lfa_tiebreaker_type_modify,
}
},
yang, isisd: add RLFA nodes, skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-26 01:01:14 +01:00
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-1/remote-lfa/prefix-list",
.cbs = {
.cli_show = cli_show_isis_frr_remote_lfa_plist,
.modify = isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_modify,
.destroy = isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_destroy,
}
},
yang, isisd: add LFA nodes, NB skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-06 03:55:35 +01:00
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-2/lfa/load-sharing",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_load_sharing,
.modify = isis_instance_fast_reroute_level_2_lfa_load_sharing_modify,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-2/lfa/priority-limit",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_priority_limit,
.modify = isis_instance_fast_reroute_level_2_lfa_priority_limit_modify,
.destroy = isis_instance_fast_reroute_level_2_lfa_priority_limit_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-2/lfa/tiebreaker",
.cbs = {
.cli_show = cli_show_isis_frr_lfa_tiebreaker,
.create = isis_instance_fast_reroute_level_2_lfa_tiebreaker_create,
.destroy = isis_instance_fast_reroute_level_2_lfa_tiebreaker_destroy,
}
},
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-2/lfa/tiebreaker/type",
.cbs = {
.modify = isis_instance_fast_reroute_level_2_lfa_tiebreaker_type_modify,
}
},
yang, isisd: add RLFA nodes, skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-26 01:01:14 +01:00
{
.xpath = "/frr-isisd:isis/instance/fast-reroute/level-2/remote-lfa/prefix-list",
.cbs = {
.cli_show = cli_show_isis_frr_remote_lfa_plist,
.modify = isis_instance_fast_reroute_level_2_remote_lfa_prefix_list_modify,
.destroy = isis_instance_fast_reroute_level_2_remote_lfa_prefix_list_destroy,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/log-adjacency-changes",
.cbs = {
.cli_show = cli_show_isis_log_adjacency,
.modify = isis_instance_log_adjacency_changes_modify,
},
},
isisd: Add log-pdu-drops CLI/YANG support New config functionality: r1# conf r1(config)# router isis 1 r1(config-router)# log- log-adjacency-changes Log changes in adjacency state log-pdu-drops Log any dropped PDUs r1(config-router)# log-pdu-drops r1(config-router)# end Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
2023-03-31 01:25:02 +02:00
{
.xpath = "/frr-isisd:isis/instance/log-pdu-drops",
.cbs = {
.cli_show = cli_show_isis_log_pdu_drops,
.modify = isis_instance_log_pdu_drops_modify,
},
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-isisd:isis/instance/mpls-te",
.cbs = {
.cli_show = cli_show_isis_mpls_te,
.create = isis_instance_mpls_te_create,
.destroy = isis_instance_mpls_te_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/mpls-te/router-address",
.cbs = {
.cli_show = cli_show_isis_mpls_te_router_addr,
.destroy = isis_instance_mpls_te_router_address_destroy,
.modify = isis_instance_mpls_te_router_address_modify,
},
},
isisd: Add support for RFC6119 (IPv6 TE in IS-IS) - Add advertisement of Global IPv6 address in IIH pdu - Add new CLI to set IPv6 Router ID - Add advertisement of IPv6 Router ID - Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT Reachability TLVs - Correct output of Neighbor IPv6 address in 'show isis database detail' - Manage IPv6 addresses advertisement and corresponiding Adjacency SID when IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE value for mtid (== 4096 i.e. first reserved flag set to 1) Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2021-06-30 17:23:56 +02:00
{
.xpath = "/frr-isisd:isis/instance/mpls-te/router-address-v6",
.cbs = {
.cli_show = cli_show_isis_mpls_te_router_addr_ipv6,
.destroy = isis_instance_mpls_te_router_address_ipv6_destroy,
.modify = isis_instance_mpls_te_router_address_ipv6_modify,
isisd: Add Link State Traffic Engineering support Add Link State TED features to isis_te.c and new CLI to export LS TED and show LS TED to IS-IS. IS-IS LSPs are parse each time a new LSP event occurs in order to update accordingly the Link State Traffic Engineering Database. LS TED could be exported through the ZAPI Opaque message (see sharpd as example). Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2021-06-22 20:18:00 +02:00
}
},
{
.xpath = "/frr-isisd:isis/instance/mpls-te/export",
.cbs = {
.cli_show = cli_show_isis_mpls_te_export,
.modify = isis_instance_mpls_te_export_modify,
isisd: Add support for RFC6119 (IPv6 TE in IS-IS) - Add advertisement of Global IPv6 address in IIH pdu - Add new CLI to set IPv6 Router ID - Add advertisement of IPv6 Router ID - Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT Reachability TLVs - Correct output of Neighbor IPv6 address in 'show isis database detail' - Manage IPv6 addresses advertisement and corresponiding Adjacency SID when IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE value for mtid (== 4096 i.e. first reserved flag set to 1) Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2021-06-30 17:23:56 +02:00
},
},
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
{
.xpath = "/frr-isisd:isis/instance/segment-routing/enabled",
.cbs = {
.modify = isis_instance_segment_routing_enabled_modify,
isisd: add segment-routing CLI commands In the name of consistency, these commands are very similar to the ospfd SR configuration commands. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:37:00 +02:00
.cli_show = cli_show_isis_sr_enabled,
},
},
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks",
.cbs = {
.pre_validate = isis_instance_segment_routing_label_blocks_pre_validate,
.cli_show = cli_show_isis_label_blocks,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srgb",
isisd: add segment-routing CLI commands In the name of consistency, these commands are very similar to the ospfd SR configuration commands. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:37:00 +02:00
.cbs = {
isisd: add support for segment routing This is an implementation of the IS-IS SR draft [1] for FRR. The following features are supported: * IPv4 and IPv6 Prefix-SIDs; * IPv4 and IPv6 Adj-SIDs and LAN-Adj-SIDs; * Index and absolute labels; * The no-php and explicit-null Prefix-SID flags; * Full integration with the Label Manager. Known limitations: * No support for Anycast-SIDs; * No support for the SID/Label Binding TLV (required for LDP interop). * No support for persistent Adj-SIDs; * No support for multiple SRGBs. [1] draft-ietf-isis-segment-routing-extensions-25 Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com> Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-04 03:02:37 +02:00
.apply_finish = isis_instance_segment_routing_srgb_apply_finish,
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
},
},
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srgb/lower-bound",
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
.cbs = {
.modify = isis_instance_segment_routing_srgb_lower_bound_modify,
},
},
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srgb/upper-bound",
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
.cbs = {
.modify = isis_instance_segment_routing_srgb_upper_bound_modify,
},
},
isisd: Add Segment Routing Local Block support Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB could be configured through CLI or Yang. Adjacency-SID are now using this SRLB for label allocation. SRLB could also be used for SID-Binding (e.g. LDP to SR). Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2020-05-20 11:18:31 +02:00
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srlb",
isisd: Add Segment Routing Local Block support Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB could be configured through CLI or Yang. Adjacency-SID are now using this SRLB for label allocation. SRLB could also be used for SID-Binding (e.g. LDP to SR). Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2020-05-20 11:18:31 +02:00
.cbs = {
.apply_finish = isis_instance_segment_routing_srlb_apply_finish,
},
},
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srlb/lower-bound",
isisd: Add Segment Routing Local Block support Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB could be configured through CLI or Yang. Adjacency-SID are now using this SRLB for label allocation. SRLB could also be used for SID-Binding (e.g. LDP to SR). Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2020-05-20 11:18:31 +02:00
.cbs = {
.modify = isis_instance_segment_routing_srlb_lower_bound_modify,
},
},
{
isisd, yang, doc: combine config cmd for SRGB+SRLB when changing both ranges at the same time the order of the commands matters, as we need to make sure that the intermediate state is valid. This represents a problem when pushing configuration via frr-reload. To fix this, the global-block command was extended to optionally allow setting the local-block range as well. The local-block command is deprecated with a 1-year notice. Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
2021-03-09 16:56:45 +01:00
.xpath = "/frr-isisd:isis/instance/segment-routing/label-blocks/srlb/upper-bound",
isisd: Add Segment Routing Local Block support Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB could be configured through CLI or Yang. Adjacency-SID are now using this SRLB for label allocation. SRLB could also be used for SID-Binding (e.g. LDP to SR). Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2020-05-20 11:18:31 +02:00
.cbs = {
.modify = isis_instance_segment_routing_srlb_upper_bound_modify,
},
},
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
{
.xpath = "/frr-isisd:isis/instance/segment-routing/msd/node-msd",
.cbs = {
.modify = isis_instance_segment_routing_msd_node_msd_modify,
.destroy = isis_instance_segment_routing_msd_node_msd_destroy,
isisd: add segment-routing CLI commands In the name of consistency, these commands are very similar to the ospfd SR configuration commands. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:37:00 +02:00
.cli_show = cli_show_isis_node_msd,
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/prefix-sid-map/prefix-sid",
.cbs = {
.create = isis_instance_segment_routing_prefix_sid_map_prefix_sid_create,
.destroy = isis_instance_segment_routing_prefix_sid_map_prefix_sid_destroy,
isisd: add support for segment routing This is an implementation of the IS-IS SR draft [1] for FRR. The following features are supported: * IPv4 and IPv6 Prefix-SIDs; * IPv4 and IPv6 Adj-SIDs and LAN-Adj-SIDs; * Index and absolute labels; * The no-php and explicit-null Prefix-SID flags; * Full integration with the Label Manager. Known limitations: * No support for Anycast-SIDs; * No support for the SID/Label Binding TLV (required for LDP interop). * No support for persistent Adj-SIDs; * No support for multiple SRGBs. [1] draft-ietf-isis-segment-routing-extensions-25 Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com> Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-04 03:02:37 +02:00
.pre_validate = isis_instance_segment_routing_prefix_sid_map_prefix_sid_pre_validate,
.apply_finish = isis_instance_segment_routing_prefix_sid_map_prefix_sid_apply_finish,
isisd: add segment-routing CLI commands In the name of consistency, these commands are very similar to the ospfd SR configuration commands. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:37:00 +02:00
.cli_show = cli_show_isis_prefix_sid,
isisd: add segment-routing YANG nodes and skeleton callbacks Most definitions were borrowed from the IETF IS-IS SR YANG module, with a few adaptations. Of particular notice are the following: * No support for the configuration of multiple SRGBs. * No distinction between local and connected Prefix-SIDs, both are configured the same way. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-08-07 18:35:07 +02:00
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/prefix-sid-map/prefix-sid/sid-value-type",
.cbs = {
.modify = isis_instance_segment_routing_prefix_sid_map_prefix_sid_sid_value_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/prefix-sid-map/prefix-sid/sid-value",
.cbs = {
.modify = isis_instance_segment_routing_prefix_sid_map_prefix_sid_sid_value_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/prefix-sid-map/prefix-sid/last-hop-behavior",
.cbs = {
.modify = isis_instance_segment_routing_prefix_sid_map_prefix_sid_last_hop_behavior_modify,
},
},
isisd: add support for Anycast-SIDs Add the "n-flag-clear" option to the "segment-routing prefix" command. The only thing that option does is to clear the node flag of the Prefix-SID, even if it corresponds to a local loopback address. No changes are necessary other than that in order to fully support Anycast-SIDs. isisd already supports multiple routers advertising the same route with the same Prefix-SID after the recent refactoring. Clearing the node flag for such anycast routes isn't strictly required, but failure to do so can lead to problems like TI-LFA picking the wrong Prefix-SID when calculating repair paths. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-09-20 07:42:32 +02:00
{
.xpath = "/frr-isisd:isis/instance/segment-routing/prefix-sid-map/prefix-sid/n-flag-clear",
.cbs = {
.modify = isis_instance_segment_routing_prefix_sid_map_prefix_sid_n_flag_clear_modify,
}
},
isisd,yang: add algorithm-prefix-sid configuration tree Add the ability to configure a Segment-Routing prefix SID for a given algorithm. For example: > segment-routing prefix 10.10.10.10/32 algorithm 128 index 100 Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com> Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
2021-12-12 12:56:44 +01:00
{
.xpath = "/frr-isisd:isis/instance/segment-routing/algorithm-prefix-sids/algorithm-prefix-sid",
.cbs = {
.create = isis_instance_segment_routing_algorithm_prefix_sid_create,
.destroy = isis_instance_segment_routing_algorithm_prefix_sid_destroy,
.pre_validate = isis_instance_segment_routing_algorithm_prefix_sid_pre_validate,
.apply_finish = isis_instance_segment_routing_algorithm_prefix_sid_apply_finish,
.cli_show = cli_show_isis_prefix_sid_algorithm,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/algorithm-prefix-sids/algorithm-prefix-sid/sid-value-type",
.cbs = {
.modify = isis_instance_segment_routing_algorithm_prefix_sid_sid_value_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/algorithm-prefix-sids/algorithm-prefix-sid/sid-value",
.cbs = {
.modify = isis_instance_segment_routing_algorithm_prefix_sid_sid_value_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/algorithm-prefix-sids/algorithm-prefix-sid/last-hop-behavior",
.cbs = {
.modify = isis_instance_segment_routing_algorithm_prefix_sid_last_hop_behavior_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/segment-routing/algorithm-prefix-sids/algorithm-prefix-sid/n-flag-clear",
.cbs = {
.modify = isis_instance_segment_routing_algorithm_prefix_sid_n_flag_clear_modify,
},
},
lib,vtysh,isisd,yang: algo cli/yang/callbacks Define the IS-IS flex-algo structure in yang, the CLI configuration commands and the skeletons of frontend and backend functions that are called by the CLI code. Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com> Signed-off-by: Eric Kinzie <ekinzie@labn.net> Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
2021-12-18 09:11:58 +01:00
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo",
.cbs = {
.cli_show = cli_show_isis_flex_algo,
.cli_show_end = cli_show_isis_flex_algo_end,
.create = isis_instance_flex_algo_create,
.destroy = isis_instance_flex_algo_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/advertise-definition",
.cbs = {
.modify = isis_instance_flex_algo_advertise_definition_modify,
.destroy = isis_instance_flex_algo_advertise_definition_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/affinity-include-alls/affinity-include-all",
.cbs = {
.create = isis_instance_flex_algo_affinity_include_all_create,
.destroy = isis_instance_flex_algo_affinity_include_all_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/affinity-include-anies/affinity-include-any",
.cbs = {
.create = isis_instance_flex_algo_affinity_include_any_create,
.destroy = isis_instance_flex_algo_affinity_include_any_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/affinity-exclude-anies/affinity-exclude-any",
.cbs = {
.create = isis_instance_flex_algo_affinity_exclude_any_create,
.destroy = isis_instance_flex_algo_affinity_exclude_any_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/prefix-metric",
.cbs = {
.create = isis_instance_flex_algo_prefix_metric_create,
.destroy = isis_instance_flex_algo_prefix_metric_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/metric-type",
.cbs = {
.modify = isis_instance_flex_algo_metric_type_modify,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/dplane-sr-mpls",
.cbs = {
.create = isis_instance_flex_algo_dplane_sr_mpls_create,
.destroy = isis_instance_flex_algo_dplane_sr_mpls_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/dplane-srv6",
.cbs = {
.create = isis_instance_flex_algo_dplane_srv6_create,
.destroy = isis_instance_flex_algo_dplane_srv6_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/dplane-ip",
.cbs = {
.create = isis_instance_flex_algo_dplane_ip_create,
.destroy = isis_instance_flex_algo_dplane_ip_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/flex-algos/flex-algo/priority",
.cbs = {
.modify = isis_instance_flex_algo_priority_modify,
.destroy = isis_instance_flex_algo_priority_destroy,
},
},
isisd: ldp-igp-sync feature: adding isis support Signed-off-by: Lynne Morrison <lynne@voltanet.io> Signed-off-by: Karen Schoener <karen@voltanet.io>
2020-07-22 20:32:35 +02:00
{
.xpath = "/frr-isisd:isis/instance/mpls/ldp-sync",
.cbs = {
.cli_show = cli_show_isis_mpls_ldp_sync,
.create = isis_instance_mpls_ldp_sync_create,
.destroy = isis_instance_mpls_ldp_sync_destroy,
},
},
{
.xpath = "/frr-isisd:isis/instance/mpls/ldp-sync/holddown",
.cbs = {
.cli_show = cli_show_isis_mpls_ldp_sync_holddown,
.modify = isis_instance_mpls_ldp_sync_holddown_modify,
},
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis",
.cbs = {
.create = lib_interface_isis_create,
.destroy = lib_interface_isis_destroy,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/area-tag",
.cbs = {
.modify = lib_interface_isis_area_tag_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/circuit-type",
.cbs = {
.cli_show = cli_show_ip_isis_circ_type,
.modify = lib_interface_isis_circuit_type_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/ipv4-routing",
.cbs = {
.cli_show = cli_show_ip_isis_ipv4,
.modify = lib_interface_isis_ipv4_routing_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/ipv6-routing",
.cbs = {
.cli_show = cli_show_ip_isis_ipv6,
.modify = lib_interface_isis_ipv6_routing_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/bfd-monitoring",
.cbs = {
*: add BFD profile support for IS-IS BFD profiles can now be used on the interface level like this: interface eth1 ip router isis 1 isis bfd isis bfd profile default Here the 'default' profile needs to be specified as usual in the bfdd configuration. Signed-off-by: GalaxyGorilla <sascha@netdef.org>
2020-07-10 13:26:55 +02:00
.apply_finish = lib_interface_isis_bfd_monitoring_apply_finish,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cli_show = cli_show_ip_isis_bfd_monitoring,
}
},
*: add BFD profile support for IS-IS BFD profiles can now be used on the interface level like this: interface eth1 ip router isis 1 isis bfd isis bfd profile default Here the 'default' profile needs to be specified as usual in the bfdd configuration. Signed-off-by: GalaxyGorilla <sascha@netdef.org>
2020-07-10 13:26:55 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/bfd-monitoring/enabled",
.cbs = {
.modify = lib_interface_isis_bfd_monitoring_enabled_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/bfd-monitoring/profile",
.cbs = {
.modify = lib_interface_isis_bfd_monitoring_profile_modify,
.destroy = lib_interface_isis_bfd_monitoring_profile_destroy,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/csnp-interval",
.cbs = {
.cli_show = cli_show_ip_isis_csnp_interval,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/csnp-interval/level-1",
.cbs = {
.modify = lib_interface_isis_csnp_interval_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/csnp-interval/level-2",
.cbs = {
.modify = lib_interface_isis_csnp_interval_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/psnp-interval",
.cbs = {
.cli_show = cli_show_ip_isis_psnp_interval,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/psnp-interval/level-1",
.cbs = {
.modify = lib_interface_isis_psnp_interval_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/psnp-interval/level-2",
.cbs = {
.modify = lib_interface_isis_psnp_interval_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/padding",
.cbs = {
.cli_show = cli_show_ip_isis_hello_padding,
.modify = lib_interface_isis_hello_padding_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/interval",
.cbs = {
.cli_show = cli_show_ip_isis_hello_interval,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/interval/level-1",
.cbs = {
.modify = lib_interface_isis_hello_interval_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/interval/level-2",
.cbs = {
.modify = lib_interface_isis_hello_interval_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/multiplier",
.cbs = {
.cli_show = cli_show_ip_isis_hello_multi,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/multiplier/level-1",
.cbs = {
.modify = lib_interface_isis_hello_multiplier_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/hello/multiplier/level-2",
.cbs = {
.modify = lib_interface_isis_hello_multiplier_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/metric",
.cbs = {
.cli_show = cli_show_ip_isis_metric,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/metric/level-1",
.cbs = {
.modify = lib_interface_isis_metric_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/metric/level-2",
.cbs = {
.modify = lib_interface_isis_metric_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/priority",
.cbs = {
.cli_show = cli_show_ip_isis_priority,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/priority/level-1",
.cbs = {
.modify = lib_interface_isis_priority_level_1_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/priority/level-2",
.cbs = {
.modify = lib_interface_isis_priority_level_2_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/network-type",
.cbs = {
.cli_show = cli_show_ip_isis_network_type,
.modify = lib_interface_isis_network_type_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/passive",
.cbs = {
.cli_show = cli_show_ip_isis_passive,
.modify = lib_interface_isis_passive_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/password",
.cbs = {
.cli_show = cli_show_ip_isis_password,
.create = lib_interface_isis_password_create,
.destroy = lib_interface_isis_password_destroy,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/password/password",
.cbs = {
.modify = lib_interface_isis_password_password_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/password/password-type",
.cbs = {
.modify = lib_interface_isis_password_password_type_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/disable-three-way-handshake",
.cbs = {
.cli_show = cli_show_ip_isis_threeway_shake,
.modify = lib_interface_isis_disable_three_way_handshake_modify,
},
},
{
isisd: replace ipv4-unicast with standard in config and oper contexts Only the multi-topology command can use 'ipv4-unicast' keyword to configure standard topology. The remaining code: dump from show commands, and yang definition, uses 'standard' keyword instead. The test have not been modified. The change would consists in modifying test_fuzz_isis_tlv_tests.h.gz: - replacing ipv4-unicast occurences with standard \x69\x70\x76\x34\x2d\x75\x6e\x69\x63\x61\x73\x74 with \x73\x74\x61\x6e\x64\x61\x72\x64 - align the buffer length by removing 4 bytes per occurence Instead, a specific isis_mtid2str_fake() routing has been put in place in isis_tlvs.c file. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
2022-06-01 15:37:49 +02:00
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/standard",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd: replace ipv4-unicast with standard in config and oper contexts Only the multi-topology command can use 'ipv4-unicast' keyword to configure standard topology. The remaining code: dump from show commands, and yang definition, uses 'standard' keyword instead. The test have not been modified. The change would consists in modifying test_fuzz_isis_tlv_tests.h.gz: - replacing ipv4-unicast occurences with standard \x69\x70\x76\x34\x2d\x75\x6e\x69\x63\x61\x73\x74 with \x73\x74\x61\x6e\x64\x61\x72\x64 - align the buffer length by removing 4 bytes per occurence Instead, a specific isis_mtid2str_fake() routing has been put in place in isis_tlvs.c file. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
2022-06-01 15:37:49 +02:00
.cli_show = cli_show_ip_isis_mt_standard,
.modify = lib_interface_isis_multi_topology_standard_modify,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv4-multicast",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv4_multicast,
.modify = lib_interface_isis_multi_topology_ipv4_multicast_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv4-management",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv4_mgmt,
.modify = lib_interface_isis_multi_topology_ipv4_management_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv6-unicast",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv6_unicast,
.modify = lib_interface_isis_multi_topology_ipv6_unicast_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv6-multicast",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv6_multicast,
.modify = lib_interface_isis_multi_topology_ipv6_multicast_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv6-management",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv6_mgmt,
.modify = lib_interface_isis_multi_topology_ipv6_management_modify,
},
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/multi-topology/ipv6-dstsrc",
.cbs = {
.cli_show = cli_show_ip_isis_mt_ipv6_dstsrc,
.modify = lib_interface_isis_multi_topology_ipv6_dstsrc_modify,
},
},
yang, isisd: add TI-LFA YANG nodes and corresponding skeleton callbacks Add CLI wrapper commands as well... Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-08-31 20:34:06 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute",
.cbs = {
yang, isisd: add LFA nodes, NB skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-06 03:55:35 +01:00
.cli_show = cli_show_ip_isis_frr,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_1_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/lfa/exclude-interface",
.cbs = {
.cli_show = cli_show_frr_lfa_exclude_interface,
.create = lib_interface_isis_fast_reroute_level_1_lfa_exclude_interface_create,
.destroy = lib_interface_isis_fast_reroute_level_1_lfa_exclude_interface_destroy,
yang, isisd: add TI-LFA YANG nodes and corresponding skeleton callbacks Add CLI wrapper commands as well... Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-08-31 20:34:06 +02:00
}
},
yang, isisd: add RLFA nodes, skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-26 01:01:14 +01:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/remote-lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_1_remote_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/remote-lfa/maximum-metric",
.cbs = {
.cli_show = cli_show_frr_remote_lfa_max_metric,
.modify = lib_interface_isis_fast_reroute_level_1_remote_lfa_maximum_metric_modify,
.destroy = lib_interface_isis_fast_reroute_level_1_remote_lfa_maximum_metric_destroy,
}
},
yang, isisd: add TI-LFA YANG nodes and corresponding skeleton callbacks Add CLI wrapper commands as well... Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-08-31 20:34:06 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/ti-lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_1_ti_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/ti-lfa/node-protection",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_1_ti_lfa_node_protection_modify,
}
},
isisd: link protection optional fallback in ti-lfa The current implementation of TI-LFA computes link-protecting repair paths (even when node protection is enabled) to have repair paths to all destinations when no node-protecting repair has been found. This may be desired or not. E.g. the link-protecting paths may use the protected node and be, therefore, useless if the node fails. Also, computing link-protecting repairs incurs extra calculations. With this patch, when node protection is enabled, link protecting repair paths are only computed if "link-fallback" is specified in the configuration, on a per interface and IS-IS level. Signed-off-by: Fredi Raspall <fredi@voltanet.io>
2021-04-23 18:33:43 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-1/ti-lfa/link-fallback",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_1_ti_lfa_link_fallback_modify,
}
},
yang, isisd: add LFA nodes, NB skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-06 03:55:35 +01:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_2_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/lfa/exclude-interface",
.cbs = {
.cli_show = cli_show_frr_lfa_exclude_interface,
.create = lib_interface_isis_fast_reroute_level_2_lfa_exclude_interface_create,
.destroy = lib_interface_isis_fast_reroute_level_2_lfa_exclude_interface_destroy,
}
},
yang, isisd: add RLFA nodes, skeleton callbacks and CLI commands Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-11-26 01:01:14 +01:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/remote-lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_2_remote_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/remote-lfa/maximum-metric",
.cbs = {
.cli_show = cli_show_frr_remote_lfa_max_metric,
.modify = lib_interface_isis_fast_reroute_level_2_remote_lfa_maximum_metric_modify,
.destroy = lib_interface_isis_fast_reroute_level_2_remote_lfa_maximum_metric_destroy,
}
},
yang, isisd: add TI-LFA YANG nodes and corresponding skeleton callbacks Add CLI wrapper commands as well... Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-08-31 20:34:06 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/ti-lfa/enable",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_2_ti_lfa_enable_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/ti-lfa/node-protection",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_2_ti_lfa_node_protection_modify,
}
},
isisd: link protection optional fallback in ti-lfa The current implementation of TI-LFA computes link-protecting repair paths (even when node protection is enabled) to have repair paths to all destinations when no node-protecting repair has been found. This may be desired or not. E.g. the link-protecting paths may use the protected node and be, therefore, useless if the node fails. Also, computing link-protecting repairs incurs extra calculations. With this patch, when node protection is enabled, link protecting repair paths are only computed if "link-fallback" is specified in the configuration, on a per interface and IS-IS level. Signed-off-by: Fredi Raspall <fredi@voltanet.io>
2021-04-23 18:33:43 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/fast-reroute/level-2/ti-lfa/link-fallback",
.cbs = {
.modify = lib_interface_isis_fast_reroute_level_2_ti_lfa_link_fallback_modify,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_next = lib_interface_state_isis_adjacencies_adjacency_get_next,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/neighbor-sys-type",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_neighbor_sys_type_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/neighbor-sysid",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_neighbor_sysid_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/neighbor-extended-circuit-id",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_neighbor_extended_circuit_id_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/neighbor-snpa",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_neighbor_snpa_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/hold-timer",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_hold_timer_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/neighbor-priority",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_neighbor_priority_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/state",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_adjacencies_adjacency_state_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
isisd: changed to output the adjacency-sid in yang format Signed-off-by: kanaya516 <abcs516tk1@gmail.com>
2023-01-04 04:49:25 +01:00
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/adjacency-sids/adjacency-sid",
.cbs = {
.get_next = lib_interface_state_isis_adjacencies_adjacency_adjacency_sids_adjacency_sid_get_next,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/adjacency-sids/adjacency-sid/af",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_adjacency_sids_adjacency_sid_af_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/adjacency-sids/adjacency-sid/value",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_adjacency_sids_adjacency_sid_value_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/adjacency-sids/adjacency-sid/weight",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_adjacency_sids_adjacency_sid_weight_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/adjacency-sids/adjacency-sid/protection-requested",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_adjacency_sids_adjacency_sid_protection_requested_get_elem,
}
},
isisd: changed to output the LAN-adjacency-sid in yang format Signed-off-by: kanaya516 <abcs516tk1@gmail.com>
2023-01-04 16:47:43 +01:00
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/lan-adjacency-sids/lan-adjacency-sid",
.cbs = {
.get_next = lib_interface_state_isis_adjacencies_adjacency_lan_adjacency_sids_lan_adjacency_sid_get_next,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/lan-adjacency-sids/lan-adjacency-sid/af",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_lan_adjacency_sids_lan_adjacency_sid_af_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/lan-adjacency-sids/lan-adjacency-sid/value",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_lan_adjacency_sids_lan_adjacency_sid_value_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/lan-adjacency-sids/lan-adjacency-sid/weight",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_lan_adjacency_sids_lan_adjacency_sid_weight_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/adjacencies/adjacency/lan-adjacency-sids/lan-adjacency-sid/protection-requested",
.cbs = {
.get_elem = lib_interface_state_isis_adjacencies_adjacency_lan_adjacency_sids_lan_adjacency_sid_protection_requested_get_elem,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/adjacency-changes",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_adjacency_changes_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/adjacency-number",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_adjacency_number_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/init-fails",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_init_fails_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/adjacency-rejects",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_adjacency_rejects_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/id-len-mismatch",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_id_len_mismatch_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/max-area-addresses-mismatch",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_max_area_addresses_mismatch_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
{
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/authentication-type-fails",
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
.cbs = {
isisd, yang: move IS-IS interface state data to the appropriate place Now that the "frr-interface" list has a "state" container, move the IS-IS interface state nodes underneath it using a new augmentation. Also, update the IS-IS SR topotest to account for this change. Make use of symlinks where possible to avoid having multiple files with the same content. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2020-05-19 06:19:14 +02:00
.get_elem = lib_interface_state_isis_event_counters_authentication_type_fails_get_elem,
}
},
{
.xpath = "/frr-interface:lib/interface/state/frr-isisd:isis/event-counters/authentication-fails",
.cbs = {
.get_elem = lib_interface_state_isis_event_counters_authentication_fails_get_elem,
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
}
},
isisd: ldp-igp-sync feature: adding isis support Signed-off-by: Lynne Morrison <lynne@voltanet.io> Signed-off-by: Karen Schoener <karen@voltanet.io>
2020-07-22 20:32:35 +02:00
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/mpls/ldp-sync",
.cbs = {
.cli_show = cli_show_isis_mpls_if_ldp_sync,
.modify = lib_interface_isis_mpls_ldp_sync_modify,
}
},
{
.xpath = "/frr-interface:lib/interface/frr-isisd:isis/mpls/holddown",
.cbs = {
.cli_show = cli_show_isis_mpls_if_ldp_sync_holddown,
.modify = lib_interface_isis_mpls_holddown_modify,
.destroy = lib_interface_isis_mpls_holddown_destroy,
}
},
isisd: split northbound callbacks into multiple files Rearrange the isisd northbound callbacks as following: * isis_nb.h: prototypes of all northbound callbacks. * isis_nb.c: definition of all northbound callbacks and their associated YANG data paths. * isis_nb_config.c: implementation of YANG configuration nodes. * isis_nb_state.c: implementation of YANG state nodes. * isis_nb_notifications.c: implementation of YANG notifications. This should help to keep to code more organized and easier to maintain. No behavior changes intended. Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2019-10-17 20:33:53 +02:00
{
.xpath = NULL,
},
}
};
Copy permalink