frr/debianpkg/control

Source: frr
Section: net
Priority: optional
Maintainer: David Lamparter <equinox-debian@diac24.net>
Uploaders: FRRouting-dev <dev@lists.frrouting.org>
Build-Depends:
 autotools-dev,
 bison,
 chrpath,
 debhelper (>= 9),
 debhelper (>= 9.20160709) <!pkg.frr.nosystemd> | dh-systemd <!pkg.frr.nosystemd>,
 dh-autoreconf,
 flex,
 gawk,
 git,
 install-info,
 libc-ares-dev,
 libcap-dev,
 libjson0 | libjson-c2 | libjson-c3,
 libjson0-dev | libjson-c-dev,
 libpam0g-dev | libpam-dev,
 libpcre3-dev,
 libpython-dev | libpython3-dev,
 libreadline-dev,
 librtr-dev <pkg.frr.rtrlib>,
 libsnmp-dev <pkg.frr.snmp>,
 libssh-dev <pkg.frr.rtrlib>,
 libsystemd-dev <!pkg.frr.nosystemd>,
 pkg-config,
 python (>= 2.7) | python3,
 python-sphinx | python3-sphinx,
 texinfo (>= 4.7)
Standards-Version: 4.2.1
Homepage: https://www.frrouting.org/
Vcs-Browser: https://github.com/FRRouting/frr/
Vcs-Git: https://github.com/FRRouting/frr.git

Package: frr
Architecture: any
Depends:
 ${misc:Depends},
 ${shlibs:Depends},
 iproute2 | iproute,
 logrotate (>= 3.2-11)
Pre-Depends: adduser
Recommends: frr-pythontools
Suggests: frr-doc
Conflicts: zebra, zebra-pj, quagga
Replaces: zebra, zebra-pj
Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon forked from Quagga
 FRR is free software which manages TCP/IP based routing protocols.
 It supports BGP4, BGP4+, OSPFv2, OSPFv3, IS-IS, RIPv1, RIPv2, RIPng,
 PIM and LDP as well as the IPv6 versions of these.
 .
 FRR is a fork of Quagga with an open community model. The main git
 lives on https://github.com/frrouting/frr.git

Package: frr-snmp
Architecture: any
Depends:
 ${misc:Depends},
 ${shlibs:Depends},
 frr (= ${binary:Version})
Recommends: snmpd
Description: FRRouting SNMP support
 Adds SNMP support to FRR's daemons by attaching to net-snmp's snmpd
 through the AgentX protocol.
Build-Profiles: <pkg.frr.snmp>

Package: frr-rpki-rtrlib
Architecture: any
Depends:
 ${misc:Depends},
 ${shlibs:Depends},
 frr (= ${binary:Version})
Description: FRRouting RTRlib RPKI support
 Adds RPKI support to FRR's bgpd, allowing validation of BGP routes against
 cryptographic information stored in WHOIS databases.
Build-Profiles: <pkg.frr.rtrlib>

Package: frr-dbg
Architecture: any
Depends:
 ${misc:Depends},
 frr (= ${binary:Version})
Section: debug
Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (debug symbols)
 This package provides debugging symbols for all binary packages built
 from frr source package. It's highly recommended to have this package
 installed before reporting any FRR crashes to either FRR developers or
 Debian package maintainers.

Package: frr-doc
Section: doc
Architecture: all
Depends:
 ${misc:Depends},
 libjs-jquery,
 libjs-underscore
Suggests: frr
Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (documentation)
 This package includes info files for frr, a free software which manages
 TCP/IP based routing protocols.  It supports BGP4, BGP4+, OSPFv2, OSPFv3,
 IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.

Package: frr-pythontools
Architecture: all
Depends:
 ${misc:Depends},
 frr (<< ${source:Upstream-Version}.0-~),
 frr (>= ${source:Version}~),
 python3:any
Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (Python Tools)
 This package includes info files for frr, a free software which manages
 TCP/IP based routing protocols.  It supports BGP4, BGP4+, OSPFv2, OSPFv3,
 IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.
debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`Source: frr`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Section: net`
			`Priority: optional`
debianpkg: update maintainer Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-25 19:39:32 +02:00			`Maintainer: David Lamparter <equinox-debian@diac24.net>`
			`Uploaders: FRRouting-dev <dev@lists.frrouting.org>`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`Build-Depends:`
			`autotools-dev,`
			`bison,`
			`chrpath,`
debianpkg: update debhelper dependency Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:30:54 +02:00			`debhelper (>= 9),`
			`debhelper (>= 9.20160709) <!pkg.frr.nosystemd> \| dh-systemd <!pkg.frr.nosystemd>,`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`dh-autoreconf,`
			`flex,`
			`gawk,`
			`git,`
			`install-info,`
			`libc-ares-dev,`
			`libcap-dev,`
debianpkg: kill backports The debianpkg/backports system is rather complicated and actually slows down Debian package building quite a lot since the backports/rules file is evaluated a zillion times during a normal build. This just folds up everything into a single Debian package build that works on all OSes. The only real difference that the backports stuff was used for is switching between systemd and init.d, the latter for Ubuntu 12.04 and 14.04. With this, that switch is controlled by the pkg.frr.nosystemd Build-Profile instead. Package builds for Ubuntu 14.04 need to supply the -Ppkg.frr.nosystemd option to dpkg-buildpackage. (12.04 isn't supported anymore anyway.) Note that the update-rc.d step that was previously coded into postinst/postrm is now handled by the dh_installinit magic. Other than this, there were some minor build dependency differences, all of which are now just handled as \| in the central deps. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-22 13:37:53 +02:00			`libjson0 \| libjson-c2 \| libjson-c3,`
			`libjson0-dev \| libjson-c-dev,`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`libpam0g-dev \| libpam-dev,`
			`libpcre3-dev,`
			`libpython-dev \| libpython3-dev,`
			`libreadline-dev,`
debianpkg: create frr-snmp and frr-rpki-rtrlib This splits off SNMP and RPKI support so that users can install these packages (with the appropriate dependencies) independently of main FRR. It also obsoletes out the weird multi-variant package distribution we've been doing for RPKI support. The snmpd dependency is also changed to Recommends: on frr-snmp since the frr-snmp package is essentially useless without snmpd. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-03 19:14:27 +02:00			`librtr-dev <pkg.frr.rtrlib>,`
			`libsnmp-dev <pkg.frr.snmp>,`
			`libssh-dev <pkg.frr.rtrlib>,`
debianpkg: kill backports The debianpkg/backports system is rather complicated and actually slows down Debian package building quite a lot since the backports/rules file is evaluated a zillion times during a normal build. This just folds up everything into a single Debian package build that works on all OSes. The only real difference that the backports stuff was used for is switching between systemd and init.d, the latter for Ubuntu 12.04 and 14.04. With this, that switch is controlled by the pkg.frr.nosystemd Build-Profile instead. Package builds for Ubuntu 14.04 need to supply the -Ppkg.frr.nosystemd option to dpkg-buildpackage. (12.04 isn't supported anymore anyway.) Note that the update-rc.d step that was previously coded into postinst/postrm is now handled by the dh_installinit magic. Other than this, there were some minor build dependency differences, all of which are now just handled as \| in the central deps. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-22 13:37:53 +02:00			`libsystemd-dev <!pkg.frr.nosystemd>,`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`pkg-config,`
			`python (>= 2.7) \| python3,`
			`python-sphinx \| python3-sphinx,`
			`texinfo (>= 4.7)`
debianpkg: update to Debian Policy version 4.2.1 This bundles up a few smaller changes prompted by walking through the upgrade checklist from 3.9.6 to 4.2.1. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-24 20:57:16 +02:00			`Standards-Version: 4.2.1`
debianpkg: make URLs https Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-25 20:33:51 +02:00			`Homepage: https://www.frrouting.org/`
debianpkg: update to Debian Policy version 4.2.1 This bundles up a few smaller changes prompted by walking through the upgrade checklist from 3.9.6 to 4.2.1. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-24 20:57:16 +02:00			`Vcs-Browser: https://github.com/FRRouting/frr/`
			`Vcs-Git: https://github.com/FRRouting/frr.git`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00
debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`Package: frr`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Architecture: any`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`Depends:`
			`${misc:Depends},`
			`${shlibs:Depends},`
			`iproute2 \| iproute,`
			`logrotate (>= 3.2-11)`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Pre-Depends: adduser`
debianpkg: make frr-pythontools a "Recommends:" From the Debian policy: Recommends: This declares a strong, but not absolute, dependency. The Recommends field should list packages that would be found together with this one in all but unusual installations. I'd say, yes, we do want the python-based reload functionality in all but unusual installations. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-24 17:20:29 +02:00			`Recommends: frr-pythontools`
debianpkg: update to Debian Policy version 4.2.1 This bundles up a few smaller changes prompted by walking through the upgrade checklist from 3.9.6 to 4.2.1. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-24 20:57:16 +02:00			`Suggests: frr-doc`
debian: Mark FRR as conflicting with Quagga FRR when compiled with this debian packaging will cause some issue with the system to work properly due to the sudoers file conflicts. So to prevent some level of stupidity, mark them as conflicting. Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-05-09 16:16:38 +02:00			`Conflicts: zebra, zebra-pj, quagga`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Replaces: zebra, zebra-pj`
debian: clean up, update base debian/control this removes some cruft -- old/outdated/incorrect information, trailing whitespace, etc., and updates the descriptions. Some small changes were made where appropriate to minimize the diff between the base control file and those of the various backports. Signed-off-by: Silas McCroskey <smccroskey@cumulusnetworks.com> 2017-04-28 08:58:13 +02:00			`Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon forked from Quagga`
			`FRR is free software which manages TCP/IP based routing protocols.`
			`It supports BGP4, BGP4+, OSPFv2, OSPFv3, IS-IS, RIPv1, RIPv2, RIPng,`
			`PIM and LDP as well as the IPv6 versions of these.`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`.`
debian: clean up, update base debian/control this removes some cruft -- old/outdated/incorrect information, trailing whitespace, etc., and updates the descriptions. Some small changes were made where appropriate to minimize the diff between the base control file and those of the various backports. Signed-off-by: Silas McCroskey <smccroskey@cumulusnetworks.com> 2017-04-28 08:58:13 +02:00			`FRR is a fork of Quagga with an open community model. The main git`
debianpkg: Fix some old references to freerangerouting instead of frrouting 2017-09-29 02:08:31 +02:00			`lives on https://github.com/frrouting/frr.git`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00
debianpkg: create frr-snmp and frr-rpki-rtrlib This splits off SNMP and RPKI support so that users can install these packages (with the appropriate dependencies) independently of main FRR. It also obsoletes out the weird multi-variant package distribution we've been doing for RPKI support. The snmpd dependency is also changed to Recommends: on frr-snmp since the frr-snmp package is essentially useless without snmpd. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-03 19:14:27 +02:00			`Package: frr-snmp`
			`Architecture: any`
			`Depends:`
			`${misc:Depends},`
			`${shlibs:Depends},`
			`frr (= ${binary:Version})`
			`Recommends: snmpd`
			`Description: FRRouting SNMP support`
			`Adds SNMP support to FRR's daemons by attaching to net-snmp's snmpd`
			`through the AgentX protocol.`
			`Build-Profiles: <pkg.frr.snmp>`

			`Package: frr-rpki-rtrlib`
			`Architecture: any`
			`Depends:`
			`${misc:Depends},`
			`${shlibs:Depends},`
			`frr (= ${binary:Version})`
			`Description: FRRouting RTRlib RPKI support`
			`Adds RPKI support to FRR's bgpd, allowing validation of BGP routes against`
			`cryptographic information stored in WHOIS databases.`
			`Build-Profiles: <pkg.frr.rtrlib>`

debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`Package: frr-dbg`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Architecture: any`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`Depends:`
			`${misc:Depends},`
			`frr (= ${binary:Version})`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Section: debug`
debianpkg: Fix description (make shorter - max 80 chars) - Fixes lintian error 'description-too-long' Signed-off-by: Martin Winter <mwinter@opensourcerouting.org> 2017-06-15 23:23:09 +02:00			`Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (debug symbols)`
debian: remove trailing whitespace from control Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com> 2018-08-06 22:23:03 +02:00			`This package provides debugging symbols for all binary packages built`
debian: clean up, update base debian/control this removes some cruft -- old/outdated/incorrect information, trailing whitespace, etc., and updates the descriptions. Some small changes were made where appropriate to minimize the diff between the base control file and those of the various backports. Signed-off-by: Silas McCroskey <smccroskey@cumulusnetworks.com> 2017-04-28 08:58:13 +02:00			`from frr source package. It's highly recommended to have this package`
debian: remove trailing whitespace from control Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com> 2018-08-06 22:23:03 +02:00			`installed before reporting any FRR crashes to either FRR developers or`
debian: clean up, update base debian/control this removes some cruft -- old/outdated/incorrect information, trailing whitespace, etc., and updates the descriptions. Some small changes were made where appropriate to minimize the diff between the base control file and those of the various backports. Signed-off-by: Silas McCroskey <smccroskey@cumulusnetworks.com> 2017-04-28 08:58:13 +02:00			`Debian package maintainers.`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00
debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`Package: frr-doc`
debianpkg: put frr-doc package in 'doc' section Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-25 16:05:59 +02:00			`Section: doc`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`Architecture: all`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`Depends:`
debianpkg: install HTML docs, drop tools/ No reason not to enable HTML docs really. Also why the f* were we installing the entire tools/ directory into the doc package? Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-25 16:09:21 +02:00			`${misc:Depends},`
			`libjs-jquery,`
			`libjs-underscore`
debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`Suggests: frr`
debianpkg: Fix description (make shorter - max 80 chars) - Fixes lintian error 'description-too-long' Signed-off-by: Martin Winter <mwinter@opensourcerouting.org> 2017-06-15 23:23:09 +02:00			`Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (documentation)`
debian: Convert Quagga -> Frr Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> 2017-01-04 15:25:20 +01:00			`This package includes info files for frr, a free software which manages`
Debian Packaging Files This is the collection of Debian packaging files used to compile our code 2015-05-20 01:26:49 +02:00			`TCP/IP based routing protocols. It supports BGP4, BGP4+, OSPFv2, OSPFv3,`
debian: clean up, update base debian/control this removes some cruft -- old/outdated/incorrect information, trailing whitespace, etc., and updates the descriptions. Some small changes were made where appropriate to minimize the diff between the base control file and those of the various backports. Signed-off-by: Silas McCroskey <smccroskey@cumulusnetworks.com> 2017-04-28 08:58:13 +02:00			`IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.`
debianpkg: Move frr-reload.py to frr-pythontools subpackage - avoids python dependency on main frr package Signed-off-by: Martin Winter <mwinter@opensourcerouting.org> 2017-06-17 00:49:27 +02:00
			`Package: frr-pythontools`
			`Architecture: all`
debianpkg: wrap & sort dependency lines in control Muuuuch more readable... Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-26 14:00:43 +02:00			`Depends:`
			`${misc:Depends},`
debianpkg: use better dependency for pythontools As described in https://wiki.debian.org/binNMU, arch-indep packages should have an "almost identical" dependency so "+..." changes can be made to arch-dep packages without breaking the arch-indep pkgs. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-23 13:54:07 +02:00			`frr (<< ${source:Upstream-Version}.0-~),`
			`frr (>= ${source:Version}~),`
debianpkg: change frr-pythontools dep to python3 The shebang can't be both at the same time; since python2 is going to be removed from Debian soon let's just stick with python3. Signed-off-by: David Lamparter <equinox@diac24.net> 2018-10-25 18:17:23 +02:00			`python3:any`
debianpkg: Move frr-reload.py to frr-pythontools subpackage - avoids python dependency on main frr package Signed-off-by: Martin Winter <mwinter@opensourcerouting.org> 2017-06-17 00:49:27 +02:00			`Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (Python Tools)`
			`This package includes info files for frr, a free software which manages`
			`TCP/IP based routing protocols. It supports BGP4, BGP4+, OSPFv2, OSPFv3,`
			`IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.`