matthieu/frr
1
0
Fork 0
forked from Mirror/frr
Code Pull requests Activity
frr/tests/bgpd/test_peer_attr.py

173 lines
10 KiB
Python
Raw Normal View History

tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
import frrtest
class TestFlag(frrtest.TestMultiOut):
program = './test_peer_attr'
# List of tests can be generated by executing:
# $> ./test_peer_attr 2>&1 | sed -n 's/\\/\\\\/g; s/\S\+ \[test\] \(.\+\)/TestFlag.okfail(\x27\1\x27)/pg'
#
TestFlag.okfail('peer\\ipv4-unicast\\addpath-tx-all-paths')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\addpath-tx-all-paths')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\addpath-tx-all-paths')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\addpath-tx-all-paths')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\addpath-tx-bestpath-per-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\addpath-tx-bestpath-per-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\addpath-tx-bestpath-per-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\addpath-tx-bestpath-per-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\allowas-in')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\allowas-in')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\allowas-in')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\allowas-in')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\allowas-in origin')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\allowas-in origin')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\allowas-in origin')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\allowas-in origin')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\as-override')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\as-override')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\as-override')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\as-override')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged as-path')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged as-path')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged as-path')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged as-path')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged next-hop')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged next-hop')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged next-hop')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged next-hop')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged as-path next-hop')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged as-path next-hop')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged as-path next-hop')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged as-path next-hop')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged as-path med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged as-path med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged as-path med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged as-path med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\attribute-unchanged as-path next-hop med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\attribute-unchanged as-path next-hop med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\attribute-unchanged as-path next-hop med')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\attribute-unchanged as-path next-hop med')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\capability orf prefix-list send')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\capability orf prefix-list send')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\capability orf prefix-list send')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\capability orf prefix-list send')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\capability orf prefix-list receive')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\capability orf prefix-list receive')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\capability orf prefix-list receive')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\capability orf prefix-list receive')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\capability orf prefix-list both')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\capability orf prefix-list both')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\capability orf prefix-list both')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\capability orf prefix-list both')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\default-originate')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\default-originate')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\default-originate')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\default-originate')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\default-originate route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\default-originate route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\default-originate route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\default-originate route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\filter-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\filter-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\filter-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\filter-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\filter-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\filter-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\filter-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\filter-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\maximum-prefix')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\maximum-prefix')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\next-hop-self')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\next-hop-self')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\next-hop-self')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\next-hop-self')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\next-hop-self force')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\next-hop-self force')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\next-hop-self force')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\next-hop-self force')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\prefix-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\prefix-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\prefix-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\prefix-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\prefix-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\prefix-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\prefix-list')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\prefix-list')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\remove-private-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\remove-private-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\remove-private-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\remove-private-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\remove-private-AS all')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\remove-private-AS all')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\remove-private-AS all')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\remove-private-AS all')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\remove-private-AS replace-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\remove-private-AS replace-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\remove-private-AS replace-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\remove-private-AS replace-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\remove-private-AS all replace-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\remove-private-AS all replace-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\remove-private-AS all replace-AS')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\remove-private-AS all replace-AS')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\route-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\route-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\route-reflector-client')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\route-reflector-client')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\route-reflector-client')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\route-reflector-client')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\route-server-client')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\route-server-client')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\route-server-client')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\route-server-client')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\send-community')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\send-community')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\send-community')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\send-community')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\send-community extended')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\send-community extended')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\send-community extended')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\send-community extended')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\send-community large')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\send-community large')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\send-community large')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\send-community large')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\soft-reconfiguration inbound')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\soft-reconfiguration inbound')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\soft-reconfiguration inbound')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\soft-reconfiguration inbound')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\unsuppress-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\unsuppress-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\unsuppress-map')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\unsuppress-map')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv4-unicast\\weight')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv4-multicast\\weight')
tests: Add tests for overriding BGP peer attrs This commit introduces unit tests for BGP peer attributes and checks all three involved components, which are: - CLI Configuration Input: The appropriate commands to configure the attribute on either a peer or peer-group are being executed the same way an end user would do it. - CLI Configuration Output: The output of 'show running-config' is being checked for presence/absence of expected configuration strings. - Internal Data Structures: The internal data structures for maintaining flag/filter states (value + override + invert) are being checked after each operation to ensure the override has been implemented properly. All attributes to be tested must be defined within the 'peer_attrs' structure, which contains all peer attributes as of today and checks them with both IPv4 Unicast and IPv6 Unicast. More address families are supposed to be introduced at a later point in time. Each attribute is being checked in its own 'clean' BGP environment, so everything gets reset after each attribute to avoid any weird edge cases. The 'correct' BGP startup and shutdown routine was taken from 'bgp_main.c' to ensure that we are not leaking any memory or acting different than the real 'bgpd' would do. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-27 17:52:19 +02:00
TestFlag.okfail('peer\\ipv6-unicast\\weight')
tests: Improve test suite for peer attributes This commit improves the previous implementation of the peer attribute test suite by getting rid of some really ugly macros and replacing them with sane functions. Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (== comparison) which now also prints the line where the assertion has been infringend. This should make it way more clear where a specific issue has been spotted. Last but not least, the multicast families for both IPv4 and IPv6 had been added as they are working without any further changes or special cases for all currently existing peer attributes. Other AFI/SAFI references have been removed to keep the code clean. Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
2018-05-28 18:50:52 +02:00
TestFlag.okfail('peer\\ipv6-multicast\\weight')
Copy permalink