If you have undefined behavior compilation checking gcc
starts to complain about a bunch of places that do not
have return's. When most of them actually do and we
have the assert's to prove it. I'm just doing this
to make the compiler happy for me, so I can continue
to do work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The existing iteration callback only allows for a daemon to return a
pointer to objects that must already exist and must continue to exists
indefinitely.
To allow the daemon to return allocated iterator objects and for locking
it's container structures we need a callback to tell the daemon when FRR
is done using the returned value, so the daemon can free it (or unlock
etc)
That's what list_entry_done() is for.
Signed-off-by: Christian Hopps <chopps@labn.net>
This also fixes a bug with specific (position specified) queries on keyless
lists. If the `get_next` callback is using the parent entry it will probably
crash as the code is passing the list_entry as both parent and child in the
specific lookup case.
There may currently be no code that uses the parent entry if the child entry is
non-NULL, though.
Signed-off-by: Christian Hopps <chopps@labn.net>
Previously the code was only calling the child destroy callbacks if the target
deleted node was a non-presence container. We now add a flag to the callback
structure to instruct northbound to perform the rescursive delete for code that
wishes for this to happen.
- Fix wrong relative path lookup in keychain destroy callback
Signed-off-by: Christian Hopps <chopps@labn.net>
The previous use of `lyd_new_path()` returns the first node created, rather
than the xpath target node. The code is lucky in the sense that it is
normally only creating a single node rather than a branch. Fix this to
use `lyd_new_path2()` which returns the target node to actually implement
the semantics expected by callers of `dnode_create()` (i.e., returning the
newly created target node).
Signed-off-by: Christian Hopps <chopps@labn.net>
This allows eliminating the superfluous yang_data object (which
is getting created used to call lyd_new_term then deleted). Instead
just call lyd_new_term() in the callback directly.
Signed-off-by: Christian Hopps <chopps@labn.net>
Mgmtd makes use of libyang's internal ietf-yang-library module to add
support for said module to FRR management. Previously, mgmtd was loading
this module explicitly; however, that required that libyang's
`ietf-yang-library.yang` module definition file be co-located with FRR's
yang files so that it (and ietf-datastore.yang) would be found when
searched for by libyang using FRRs search path. This isn't always the
case depending on how the user compiles and installs libyang so mgmtd
was failing to run in some cases.
Instead of doing it the above way we simply tell libyang to load it's
internal version of ietf-yang-library when we initialize the libyang
context.
This required adding a boolean to a couple of the init functions which
is why so many files are touched (although all the changes are minimal).
Signed-off-by: Christian Hopps <chopps@labn.net>
Change input/output arguments of the RPC callback from lists of
(xpath/value) tuples to YANG data trees.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This operation basically implements support for RESTCONF operations. It
receives an xpath and a data tree in JSON/XML format, instead of a list
of (xpath, value) tuples as required by the current protobuf interface.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When a node is top-level, we shouldn't stop the whole processing, we
should just skip this single node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
By calling `ly_log_options` with `LY_LOSTORE`, the current code
effectively disables libyang logging and never enables it back. The call
is done to get the current logging options, but we don't really need
that. When looking for a schema node, we don't want neither to log nor
to store the error, so simply set the temporary options to 0.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Containers inside a choice's case must be treated as presence containers
as they can be explicitly created and deleted. They must have `create`
and `destroy` callbacks, otherwise the internal data they represent may
never be deleted.
The issue can be reproduced with the following steps:
- create an access-list with destination-network params
```
# access-list test seq 1 permit ip any 10.10.10.0 0.0.0.255
```
- delete the `destination-network` container
```
# mgmt delete-config /frr-filter:lib/access-list[name='test'][type='ipv4']/entry[sequence='1']/destination-network
# mgmt commit apply
MGMTD: No changes found to be committed!
```
As the `destination-network` container is non-presence, and all its
leafs are mandatory, mgmtd doesn't see any changes to be commited and
simply updates its YANG data tree without passing any updates to backend
daemons.
This commit fixes the issue by requiring `create` and `destroy`
callbacks for containers inside choice's cases.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When ordering operations, destroys must always come before other
operations, to correctly cover the change of a "case" in a "choice".
The problem can be reproduced with the following commands:
```
access-list test seq 1 permit 10.0.0.0/8
access-list test seq 1 permit host 10.0.0.1
access-list test seq 1 permit 10.0.0.0/8
```
Before this commit, the order of changes would be the following:
- `access-list test seq 1 permit 10.0.0.0/8`
- `modify` for `ipv4-prefix`
- `access-list test seq 1 permit host 10.0.0.1`
- `destroy` for `ipv4-prefix`
- `modify` for `host`
- `access-list test seq 1 permit 10.0.0.0/8`
- `modify` for `ipv4-prefix`
- `destroy` for `host`
As `destroy` for `host` is called last, it rewrites the fields that were
filled by `modify` callback of `ipv4-prefix`. This commit fixes this
problem by always calling `destroy` callbacks first.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When ordering the NB callbacks according to their priorities, if the
operation is "destroy" we should reverse the order, to destroy the
dependants before the dependencies.
This fixes the crash, that can be reproduced with the following steps:
```
frr# conf term file-lock
frr(config)# affinity-map map bit-position 10
frr(config)# interface test
frr(config-if)# link-params
frr(config-link-params)# affinity map
frr(config-link-params)# exit
frr(config-if)# exit
frr(config)# mgmt commit apply
frr(config)# no affinity-map map
frr(config)# interface test
frr(config-if)# link-params
frr(config-link-params)# no affinity map
frr(config-link-params)# exit
frr(config-if)# exit
frr(config)# mgmt commit apply
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, YANG notification processing is done using a special type of
callbacks registered in backend clients. In this commit, we start using
regular northbound infrastructure instead, because it already has a
convenient way of registering xpath-specific callbacks without the need
for creating additional structures for each necessary notification. We
also now pass a notification data to the callback, instead of a plain
JSON. This allows to use regular YANG library functions for inspecting
notification fields, instead of manually parsing the JSON.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, when editing a leaf-list, `nb_candidate_edit` expects to
receive it's xpath without a predicate and the value in a separate
argument, and then creates the full xpath. This hack is complicated,
because it depends on the operation and on the caller being a backend or
not. Instead, let's require to always include the predicate in a
leaf-list xpath. Update all the usages in the code accordingly.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Previously each container created all it's decendents before descending into
the children and repeating the process.
Signed-off-by: Christian Hopps <chopps@labn.net>
Setting this variable to true makes NB ignore only configuration-related
callbacks. CLI-related callbacks are still loaded and executed, so
rename the variable to make it clearer.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Replace operation removes the current data node configuration and sets
the provided value. As current northbound code works only with one
xpath at a time, the operation only makes sense to clear the config of
a container without deleting it itself. However, the next step is to
allow passing JSON-encoded complex values to northbound operations which
will make replace operation much more useful.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, there's a single operation type which doesn't return error
if the object doesn't exists. To be compatible with NETCONF/RESTCONF,
we should support differentiate between DELETE (fails when object
doesn't exist) and REMOVE (doesn't fail if the object doesn't exist).
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, there's no difference between CREATE and MODIFY operations.
To be compatible with NETCONF/RESTCONF, add new CREATE_EXCL operation
that throws an error if the configuration data already exists.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, nb_operation enum means two different things - edit operation
type (frontend part), and callback type (backend part). These types
overlap, but they are not identical. We need to add more operation
types to support NETCONF/RESTCONF integration, so it's better to have
separate enums to identify different entities.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Allow user to specify full YANG compatible XPath 1.0 predicates. This
allows for trimming results of generic queries using functions and other
non-key predicates from XPath 1.0
Signed-off-by: Christian Hopps <chopps@labn.net>
Allow user to leave keys off of a list entry node at the end of the xpath. This
will return all list entries. Previously there was no way to just get the list
entries. One had to leave off the last list entry node which would then return
all list nodes as well as all the siblings at the same level.
Signed-off-by: Christian Hopps <chopps@labn.net>
Don't skip NB callbacks loading when ignore_cbs is set for a YANG
module. It allows us to use cli_show, cli_show_end and cli_cmp callbacks
in mgmtd and output configuration directly from it instead of backend
daemons.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
LYD_VALIDATE_MULTI_ERROR was added in libyang 2.1.36. The currently
enforced minimum of libyang is 2.0.0. Stick an #ifdef around it.
Fixes: 51a2a4b3f4 ("lib: print all errors when validating a config")
Cc: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`nb_cli_apply_changes` can be called with base xpath which should be
prepended to xpaths of every change in a transaction. This base xpath is
respected by regular northbound CLI but not by mgmtd. This commit fixes
the problem.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
mgmtd frees all non-NULL change->value variables at the end of every
commit. We shouldn't assign change->value with data returned by libyang
to prevent freeing of library-allocated memory.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
