This tells hosts on the subnet if (and which) NAT64 prefix is in use.
Useful for things like xlat464, or local dns64.
Updated from the previous -03 draft implementation. (PLC field did not
exist before.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The adata variable was being leaked on shutdown since
it was calloc'ed. There is no need to make this dynamic
memory. Just choose a size and use that. Add a bit
of code to ensure that if it's not large enough,
it will just stop and the developer will fix it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move a few things into places they actually belong, and reduce the
number of places we have `#ifdev HAVE_RTADV`. Just overall code
prettification.
... I had actually done this quite a while ago while doing some other
random hacking and thought it more useful to not be sitting on it on my
disk...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add to `show zebra` whether or not RA is compiled into FRR
and whether or not BGP is using RFC 5549 at the moment.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rework RA handling for vrf-lite scenarios.
Before we were using a single FD descriptor for polling
across multiple zvrf's. This would cause us to hit this
assert() in some bgp unnumbered and vrrp configs:
```
/*
* What happens if we have a thread already
* created for this event?
*/
if (thread_array[fd])
assert(!"Thread already scheduled for file descriptor");
```
We were scheduling a thread_read on the same FD for every zvrf.
With vrf-lite, RAs and ARPs are not vrf-bound, so we can just use one
rtadv instance to manage them for all VRFs. We will choose the default
VRF for this.
This patch removes the rtadv_sock altogether for zrouter and moves the
functionality this represented to the default VRF. All RAs will be
handled in the default VRF under vrf-lite configs with only one poll
thread started for it.
This patch also extends how we track subscribed interfaces (s or msec)
to use an actual sorted list by interface names rather than just a
counter. With multiple daemons turning interfaces/on/off these counters
can get very wrong during ifup/down events. Making them a sorted list
prevents this from happening by preventing duplicates.
With netns-vrf's nothing should change other than the interface list.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The rtadv code has two types of sockets:
a) namespace -> Where each zvrf get's it's own socket
b) vrf lite -> Where we get 1 socket for everything
When we were terminating a vrf we were *always*
killing the (b) socket. This is a mistake in
that other vrf's may need to be communicating.
Modify the code on vrf shutdown to only disable
that vrf's event processing and when we actually
terminate we shut the socket.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
RFC 4861 states that ipv6 RA messages sent out an interface should
contain all global ipv6 addresses on that interface. This fix adds
that capability. To override the default flags and timer settings
for a particular prefix, the existing "ipv6 nd prefix ..." command
should be used via vtysh under the appropriate interface.
Ticket: CM-20363
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing agency that RFC4861 section 6.2.5
states that a router should send an RA with a lifetime of 0
before ceasing to send RAs on the interface, or when the interace
is shutdown, or the router is shutdown. This fix adds that capability.
Ticket: CM-27061
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
when network namespace is used as vrf backend, there is need to have
separate contexts for rtadv contexts.
route advertisements have to look for appropriate interface based on
zvrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when network namespace is used as vrf backend, there is need to have
separate contexts for rtadv contexts.
route advertisements have to look for appropriate interface based on
zvrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Adds support for V4 GoAway flag as described in
https://www.ietf.org/id/draft-bz-v4goawayflag-00.txt
This option allows advertising neighbors to indicate to recipients that
they should disable IPv4 on the link.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Group send and receive functions together, change handlers to take a
message instead of looking at ->ibuf and ->obuf, allow zebra to read
multiple packets off the wire at a time.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
A lot of the handler functions that are called directly from the ZAPI
input processing code take different argument sets where they don't need
to. These functions are called from only one place and all have the same
fundamental information available to them to do their work. There is no
need to specialize what information is passed to them; it is cleaner and
easier to understand when they all accept the same base set of
information and extract what they need inline.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Otherwise we get warning on rtadv_init() prototype not being
defined when compiling rtadv.c (as dummy stub is provided always).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Instead of turning on IPv6 RA on every interface as soon as it has an IPv6
address, only enable it upon configuration of BGP neighbor. When the BGP
neighbor is deleted, signal that RAs can be turned off.
To support this, introduce new message interaction between BGP and Zebra.
Also, take appropriate actions in BGP upon interface add/del since the
unnumbered neighbor could exist prior to interface creation etc.
Only unnumbered IPv6 neighbors require RA, the /30 or /31 based neighbors
don't. However, to keep the interaction simple and not have to deal with
too many dynamic conditions (e.g., address deletes or neighbor change to/from
'v6only'), RAs on the interface are triggered upon any unnumbered neighbor
configuration.
BGP-triggered RAs will cause RAs to be initiated on the interface; however,
if BGP asks that RAs be stopped (upon delete of unnumbered neighbor), RAs
will continue to be exchanged if the operator has explicitly enabled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10640
Reviewed By: CCR-4589
Testing Done: Various manual and automated (refer to defect)
Restrict interfaces on which IPv6 Router Advertisements are allowed. The list
excludes loopback interfaces including the VRF device interface; specific to
Cumulus, it also includes "switch0" and "ethX" interfaces.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9849
Reviewed By: CCR-4334
Testing Done: Manual
There exist cases where Cumulus Code( in this case code surrounding
when we want to send Router Advertisements ) should only be
turned on for Cumulus Switches.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch reorganizes the RA handling to be per namespace rather than per
VRF. The VRF library by 6wind had done the original change to make the RA
data structures (socket information) per VRF, but this was correct only if
each VRF represented a NS. In our reorganization, we have created a NS
structure (struct zebra_ns) and VRFs don't correspond to namespaces (i.e.,
all VRFs exist in the default namespace). So, the RA handling should be
done under 'struct zebra_ns'.
With the changes, there is a single raw socket per NS (=> 1 for us) on which
we will receive and handle RAs for all interfaces. The interface information
is available through cmsg and the processing will then happen for that interface.
There is a problem with transmitting RAs over a VRF interface. This is
tracked by CM-9398.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9206
Reviewed By: CCR-4217
Testing Done: Manual testing
When enabling IPv6 Router Advertisements automatically based on the
presence of IPv6 address on an interface, do it only for relevant
interfaces.
Note: This needs a configure option for completion.
Ticket: CM-9358
Reviewed By: CCR-4116
Testing Done: Manual verification
The RTADV define was not being set correctly or consistently.
Make the code consistent with our HAVE_IPV6 define.
If the user wants to explicitly turn it off then they should
run --disable-rtadv from the configure cli
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This moves the global variable "rtadv" into the "struct zebra_vrf",
so that RTADV feature can work per VRF.
* rtadv.c/rtadv.h:
Add a proper parameter to the functions so that the entity of the
"struct zebra_vrf" and interfaces can be obtained from the specified
VRF.
The old rtadv_init() is splitted into:
- rtadv_cmd_init(): it installs the RTADV commands; is called from
main();
- new rtadv_init(): it creates the socket; is called from
zebra_vrf_enable().
rtadv_terminate() is added to stop the threads, close the socket and
clear the counters. It is called from zebra_vrf_disable().
rtadv_make_socket() now calls vrf_socket() to create a socket in
the VRF.
* interface.h and rib.h: define the macro RTADV.
* main.c: according changes, refer to rtadv.c.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/interface.h
zebra/rib.h
zebra/rtadv.c
zebra/rtadv.h
let's ground the rtadv.h file if route advertisements are disabled. And
fix up the CLI for it, as well as move the "show ip mroute" to its
proper place.
* zebra/rtadv.h: #ifdef RTADV
* zebra/main.c: #ifdef RTADV
* zebra/zebra_vty.c: move "show ip mroute" out of #ifdef IPV6
From: Joachim Nilsson <troglobit@gmail.com>
[moved #ifdef RTADV to rtadv.h]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* */*: Fix various problems flagged by Sun Studio compiler.
- '<qualifier> <storage>' obsolescent in declarations
- empty statements (';' after ALIAS definitions)
- implicit declarations (e.g printstack in lib/log.c)
- "\%" in printf string instead of "%%"
- loops that return on the first iteration (legitimately, but
compiler can't really know), e.g. bgp_routemap.c
- internal declarations which mask prototypes.
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
