When writing the config from the NB-converted daemon, we must not rely
on the operational data. This commit changes the output of the interface
configuration to use only config data. As the code is the same for all
daemons, move it to the lib and remove all the duplicated code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To ensure this, add a const modifier to functions' arguments. Would be
great do this initially and avoid this large code change, but better
late than never.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Do not explicitly set the thread pointer to NULL.
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
RIP schedules a call to `rip_interface_wakeup` in 1 second after
receiving the interface UP event from zebra. The function is called even
if the interface was shut down during this interval.
This is incorrect and also leads to a crash in the following scenario:
```
vtysh -c "conf" -c "router rip vrf red" -c "network enp2s0"
ip link add red type vrf table 1
ip link set enp2s0 vrf red
ip link set enp2s0 down
ip link set enp2s0 up && ip link del red
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
The point of the `-std=gnu99` was to override a `-std=c99` that may be
coming in from net-snmp. However, we want C11, not C99.
Signed-off-by: David Lamparter <equinox@diac24.net>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
rip(ng)d_instance_disable unlinks the vrf from the instance which means
that rip(ng)_interfaces_clean never works, because rip(ng)->vrf is
always NULL there. This leads to the crash #6477.
Clean interfaces before disabling the instance to fix the issue.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Display human readable error message in northbound rpc
transaction failure. In case of vtysh nb client, the error
message will be displayed to user.
Testing:
bharat# clear evpn dup-addr vni 1002 ip 11.11.11.11
Error type: generic error
Error description: Requested IP's associated MAC aa:aa:aa:aa:aa:aa is still
in duplicate state
Signed-off-by: Chirag Shah <chirag@nvidia.com>
DEFPY_YANG will allow the CLI to identify which commands are
YANG-modeled or not before executing them. This is going to be
useful for the upcoming configuration back-off timer work that
needs to commit pending configuration changes before executing a
command that isn't YANG-modeled.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
When fetching the next route node in the RIB, skip the empty ones
to avoid calling other northbound callbacks later unnecessarily.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Having a fixed set of parameters for each northbound callback isn't a
good idea since it makes it difficult to add new parameters whenever
that becomes necessary, as several hundreds or thousands of existing
callbacks need to be updated accordingly.
To remediate this issue, this commit changes the signature of all
northbound callbacks to have a single parameter: a pointer to a
'nb_cb_x_args' structure (where x is different for each type
of callback). These structures encapsulate all real parameters
(both input and output) the callbacks need to have access to. And
adding a new parameter to a given callback is as simple as adding
a new field to the corresponding 'nb_cb_x_args' structure, without
needing to update any instance of that callback in any daemon.
This commit includes a .cocci semantic patch that can be used to
update old code to the new format automatically.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a common api that formats a time interval into a string
with different output for short and longer intervals. We do
this in several places, for cli/ui output.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
ripd was using zclient_redistribute for installation but not
for removal. As such the lib/zclient.c was not properly tracking
add/removal. I think it would be best to just let rip to track
this instead of zclient.
Fixes: #5599
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rearrange the ripd northbound callbacks as following:
* rip_nb.h: prototypes of all northbound callbacks.
* rip_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* rip_nb_config.c: implementation of YANG configuration nodes.
* rip_nb_state.c: implementation of YANG state nodes.
* rip_nb_rpcs.c: implementation of YANG RPCs.
* rip_nb_notifications.c: implementation of YANG notifications.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
ripd operational & config data may already applied and available, while
an external event requests for changing the vrf name. this change
updates the config and operational context of yang.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
if default vrf name is updated, then rip contexts based on that
hypothetical vrfname, will be enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
libyang-0.16-r3 doesn't allow the creation of data nodes if their
corresponding "when" statement (if any) resolves to false. This
change broke the "ip rip authentication" command.
This commit adapts this command so that it's not affected by the
new libyang stricter validation checks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The fact that the OpenBSD RB_TREE stuff results in a compiler warning on
OpenBSD - and OpenBSD alone - is pretty funny, I have to say...
Signed-off-by: David Lamparter <equinox@diac24.net>
For some reason, the compiler on OpenBSD on our CI boxes doesn't like
struct initializers with ".a.b = x, .a.c = y", generating a warning
about overwritten initializers...
Signed-off-by: David Lamparter <equinox@diac24.net>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We should never attempt to remove a list item in the "del" callback
of the list. This is already performed by the list_delete() function,
doing it twice leads to crashes or memory corruption.
Introduce the offset_list_free() function so that we can separate the
removal and deallocation of offset lists into separate functions,
without code duplication. offset_list_del() will be used by the
northbound callbacks to remove offset lists, while offset_list_free()
will be used by rip_clean() to clean up all RIP offset lists using
list_delete(). Do the same for ripngd.
This is a fallout from the ripd/ripngd northbound conversion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce a hash table to keep track of user pointers associated
to configuration entries. The previous strategy was to embed
the user pointers inside libyang data nodes, but this solution
incurred a substantial performance overhead. The user pointers
embedded in candidate configurations could be lost while the
configuration was being edited, so they needed to be regenerated
before the candidate could be committed. This was done by the
nb_candidate_restore_priv_pointers() function, which was extremely
expensive for large configurations. The new hash table solves this
performance problem.
The yang_dnode_[gs]et_entry() functions were renamed and moved from
yang.[ch] to northbound.[ch], which is a more appropriate place
for them. This patch also introduces the nb_running_unset_entry()
function, the counterpart of nb_running_set_entry() (unsetting
user pointers was done automatically before, now it needs to be
done manually).
As a consequence of these changes, we shouldn't need support for
libyang private pointers anymore (-DENABLE_LYD_PRIV=ON). But it's
probably a good idea to keep requiring this feature as we might
need it in the future for other things (e.g. disable configuration
settings without removing them).
Fixes#4136.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
PR #3622 renamed the "delete" northbound callback to "destroy" in
order to make the libfrr headers compatible with C++. This commit
renames a few functions that still use "delete" instead of "destroy"
in their names.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
libyang-0.16-rc3 fixed a bug [1] in which data would be auto-deleted
when it shouldn't. The problem is that the "no passive-interface"
command was relying on that wrong behavior, so the command was
affected when the libyang bug was fixed. Adapt the command to do
the right thing in order to get rid of the problem (regardless of
the libyang version being used).
"passive-interface default" still has problems though, but that
will be addressed separetely in the future.
Fixes#3870.
[1] https://github.com/CESNET/libyang/commit/8af82206908
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
an interface rmap context can be created from a custom name string,
instead of a vrf. This ability permits to handle several instances of
interface route map in the same vrf. The naming convention will be
transparent on what the name is for in the daemon code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
so as to handle ri/ripng/eigrp multiple instances, the need is to
encapsulate if_rmap hash table into a container context self to each
instance. This work then reviews the if_rmap api, mainly by adding a
if_rmap_ctx context, that is passed for each exchange between library
and the daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Change the northbound lib operation from DELETE to DESTROY;
make the required changes in the users of the northbound, in
the cli, rip, ripng, and isis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some misc changes to resolve some c++ compilation errors.
The goal is only to permit an external module - a plugin,
for example - to see frr headers, not to support or encourage
contributions in c++. The changes include: avoiding use
of keywords like 'new', 'delete'; cleaning up implicit
type-casting from 'void *' in several places.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
ripd and ripngd were leveraging the zclient code to keep track of
the redistribute configuration, which is what most daemons do. The
problem, however, is that the zclient code uses VRF IDs to identify
VRFs, and VRF IDs are unknown until a VRF is enabled (information
received from zebra). This means we can't configure a redistribute
command on a RIP instance when the corresponding VRF is disabled
(doing so leads to a null-dereference crash right now in both ripd
and ripngd).
To fix this, change the rip/ripng data structures so that they
keep track of the full redistribute configuration and not only the
route-map and metric associated to each command. This is similar
to what bgpd and ospfd are doing to solve the same problem. In the
future the zclient code and all daemons need to be refactored to
consolidate the handling of redistribute configuration in a single
place to reduce code duplication. One of the most important changes
to do is to use VRF names and not VRF IDs to identify VRFs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Description of the new parameter (adapted from the ietf-rip module):
"VRF name identifying a specific RIP instance.
This leaf is optional for the rpc.
If it is specified, the rpc will clear all routes in the
specified RIP instance;
if it is not specified, the rpc will clear all routes in
all RIP instances.";
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Turn the "instance" YANG presence-container into a YANG list keyed
by the new "vrf" leaf. This is a backward incompatible change but
this should be ok for now.
* RIP VRF instances can be configured even when the corresponding
VRF doesn't exist. And a RIP VRF instance isn't deleted when
the corresponding VRF is deleted. For this to work, implement the
rip_instance_enable() and rip_instance_disable() functions that are
called to enable/disable RIP routing instances when necessary. A
RIP routing instance can be enabled only when the corresponding
VRF is enabled (this information comes from zebra and depends on
the underlying VRF backend). Routing instances are stored in the new
rip_instances rb-tree (global variable).
* Add a vrf pointer to the rip structure instead of storing vrf_id
only. This is much more convenient than using vrf_lookup_by_id()
every time we need to get the vrf pointer from the VRF ID. The
rip->vrf pointer is updated whenever the VRF enable/disable hooks
are called.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ripd code can handle this error just fine (e.g. reject the
configuration transaction), there's no need to exit when a socket
fails to be created.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For unknown reasons, the IP_MULTICAST_IF sockoption doesn't
seem to work when the given socket is bound to a VRF device on
Linux. Switch from sendto() to sendmsg() so that we can specify the
outgoing interface of multicast packets using IP_PKTINFO ancillary
data. This also makes ripd more consistent with ripngd, which also
uses sendmsg() to send packets on the wire.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is the last step to make ripd ready for multi-instance support.
Remove the rip global variable and add a "rip" parameter to all
functions that need to know the RIP instance they are working
on. On some functions, retrieve the RIP instance from the interface
variable when it exists (this assumes interfaces can pertain to
one RIP instance at most, which is ok for VRF support).
In preparation for the next commits (VRF support), add a "vrd_id"
member to the rip structure, and use rip->vrf_id instead of
VRF_DEFAULT wherever possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an old standing bug where the list of RIP peers wasn't
cleared after deconfiguring RIP, which caused the existing peers
to still be present on a newly configured RIP instance (except when
the timed out after ~3 minutes). Fix this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The only sideeffect of this change is that these counters will be
reset when RIP is deconfigured and then configured again, but this
shouldn't be a problem as the RIP MIB isn't specific about this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
None of these variables or functions were being used since the
initial revision ~16 years ago. It's safe to say we can remove
them now.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Call rip_clean() only when RIP is configured, this way we can
remove one indentation level from this function.
* rip_redistribute_clean() is only called on shutdown, so there's
no need to call rip_redistribute_withdraw() there since the RIP
table is already cleaned up elsewhere.
* There's no need to clean up the "rip->neighbor" nodes manually before
calling route_table_finish().
* Deallocate the rip structure only at the end of the function. This
prepares the ground for the next commits where all global variables
will be moved to the rip structure.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
