The problem here is when the same node is FHR as well as RP,
then the node keeps on sending the register packet.
Register-stop is not sent as well.
This problem has occurred because the RP is the same node
and there is no socket created on loopback interface, so the
packet is never send out and never received back on the same
node, so register recv could not be processed on the node and
hence no register-stop is sent.
Since register packets are unicast packets, its better to handle
the send of register packet via a separate register socket.
This fixes the problem mentioned above as well.
Fixes: #11331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Change the show running commands for bsm and vxlan pimv4 and pimv6
debug commands based on the address family.
Including bsm and vxlan in no debug pimv6 debug.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
In several places, we are getting the vrf structure using
vrf_lookup_by_name(). Again we are passing vrf->vrf_id to
pim_get_pim_instance() to get the pim_instance.
The API pim_get_pim_instance() again get the VRF structure using
vrf_lookup_by_id(). This is avoided in this PR.
Signed-off-by: Sarita Patra <saritap@vmware.com>
"show ip pim interface traffic json" shows pruneTx first and then
pruneRx stats
where as
"show ip pim interface <ifname> json" shows pruneRx first and then
pruneTx stats.
Although the values are right but the display looks odd.
Making it same as other stats, first display Rx and then Tx.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving the reusable code of pim_show_nexthop apis to common file
pim_cmd_common.c file and adding the json support for show ipv6 pim nexthop
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The command "show ip[v6] mroute" displaying group and source
field for every OIL.
Fix:
Display group and source for the first OIL only.
Signed-off-by: sarita patra <saritap@vmware.com>
For show ip pim interface traffic cli, doing the below changes
1. Changing DEFUN to DEFPY
2. Move the whole code to a common api and modify it so that can
be reused for pimv6.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving pim_show_interface_traffic and pim_show_interface_traffic_single
to pim_cmd_common.c from pim_cmd.c to make it common to
pimd and pim6d.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving the common lines of pim_show_join_vrf and pim_show_join_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_nexthop_lookup cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_nexthop cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_local_membership cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_jp_agg cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_channel cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The test for setting pimDesignatedRouterLocal was comparing
the result of pim_addr_cmp to non zero to say that the
pim_dr_addr and primary_address are the same. This is
not correct in that pim_addr_cmp returns 0 for being the
same, so the correct test is !pim_addr_cmp
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
PIM_IPV == 4 is removed form function pim_cmd_show_ip_multicast_helper
as pim_zlookup.c is available for pimv6 aswell.
Signed-off-by: Abhishek N R <abnr@vmware.com>
Implementing pimv6 packets debug to information about packet generation for sending
and about packet handling from a received packet.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new show CLI to display regarding pim neighbors.
Changing DEFUN to DEFPY for "show ip pim neighbor" command.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the new cli to display pim local membership information.
Changing DEFUN to DEPFY for "show ip pim local-membership"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim join and show ipv6 pim vrf all join
CLIs to display pim join related information and
formatted the json output for "show ip pim join" and
"show ip pim vrf all join" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim interface and show ipv6 pim vrf all interface
CLIs to display pim enabled interface informations and
formatted the json output for "show ip pim interface" and
"show ip pim vrf all interface" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new CLI to display pim channel informations.
Changing DEFUN to DEPFY for ""show ip pim channel"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Fixing the below problem:
Dereferencing a pointer that might be "NULL" "group_dnode"
when calling "yang_is_last_list_dnode" in api pim_process_no_rp_cmd
Although there is no NULL pointer dereference since
yang_dnode_exists is called before using the dnode.
So removing the unnecessary yang_dnode_exists api call
and directly get the node and if node does not exists,
return.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
1. Moving the processing of the above command to an api.
2. Change DEFUN to DEPFY
3. Make the api common for pimv4 and pimv6 processing.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modify the apis pim_process_rp_cmd and pim_process_no_rp_cmd
to accomodate ipv4 as well as ipv6.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
