Implementing debug pimv6 packetdump send and recv coomands for debugging
of pimv6 packet sent and received which are dumped.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing pimv6 packets debug to information about packet generation for sending
and about packet handling from a received packet.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 nht command for PIMv6 nexthop tracking.
It will display information about RPF lookups and information about when a nexthop changes.
debug pimv6 nht detial for for PIMv6 nexthop in detail.This is not enabled by default.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Added a new cli command "ip pim passive" in the interface context,
to disable sending of pim control packets on the interface.
Signed-off-by: sarita patra <saritap@vmware.com>
There's a common pattern of "get VRF context for CLI node" here, which
first got a helper macro in zebra that then permeated into pimd.
Unfortunately the pimd copy wasn't quite adjusted correctly and thus
caused two coverity warnings (CID 1517453, CID 1517454).
Fix the PIM one, and clean up by providing a common base macro in
`lib/vty.h`.
Also rename the macros (add `_VRF`) to make more clear what they do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the "mld_group_watermark_cmd" to "ipv6_mld_group_watermark_cmd"
and "igmp_group_watermark_cmd" to "ip_igmp_group_watermark_cmd" for consistency.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
frr(config-if)# ip igmp join 232.1.1.1 10.10.10.10
frr(config-if)# do sh ip igmp sources
Interface Address Group Source Timer Fwd Uptime
ens192 232.1.1.1 10.10.10.10 04:10 N 00:00:10
frr(config-if)#
The above output is misaligned and is having Address field which is not
required here.
Fixing it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new show CLI to display regarding pim neighbors.
Changing DEFUN to DEFPY for "show ip pim neighbor" command.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the new cli to display pim local membership information.
Changing DEFUN to DEPFY for "show ip pim local-membership"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim join and show ipv6 pim vrf all join
CLIs to display pim join related information and
formatted the json output for "show ip pim join" and
"show ip pim vrf all join" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding show ipv6 pim interface and show ipv6 pim vrf all interface
CLIs to display pim enabled interface informations and
formatted the json output for "show ip pim interface" and
"show ip pim vrf all interface" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding new CLI to display pim channel informations.
Changing DEFUN to DEPFY for ""show ip pim channel"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
show ip mroute json command displays the source, group info
per oil, so for pruned group since the OIL is empty, it is not
showing.
Fix: Added the above information per source.
Signed-off-by: sarita patra <saritap@vmware.com>
Now we return all zeroed stats, which seems wrong. Handle the same way, as
with PIM interfaces. Return empty JSON and a warning for VTYSH.
```
exit1-debian-11# sh ip igmp statistics interface belekas
% No such interface
exit1-debian-11# sh ip igmp statistics interface belekas json
{
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This isn't a system or interface setting, it's a socket behavior. It is
both irrelevant and confusing to the user since it doesn't affect any
system behavior (but it sounds like it does). Whether it is enabled or
not is solely relevant to how the code is designed to work.
So, remove it from output.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
1. Moving the processing of the above command to an api.
2. Change DEFUN to DEPFY
3. Make the api common for pimv4 and pimv6 processing.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Changes correct typo in JSON output for IGMP interface statistics show
command from "leaveV3" to "leaveV2".
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
`show ip pim assert` shows S,G ifchannel information even when
there is no information available about the assert process.
Fix the code to not dump non-interesting cases.
Fixes: 10462
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
XPATH_MAXLEN denotes the maximum length of an XPATH. It does not make
sense to allocate a buffer intended to contain an XPATH with a size
larger than the maximum allowable size of an XPATH. Consequently this PR
removes buffers that do this. Prints into these buffers are now checked
for overflow.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Only pim_sgaddr uses are covered by this since regular in_addr is still
used for singular addresses, so only a part of pim_inet4_dump calls are
gone with this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renamed frr-igmp.yang to frr-gmp.yang, igmp to gmp container.
to support IGMP and MLD protocol.
frr-gmp.yang, created a list of address family under mgmd
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
Replaces comparison against INADDR_ANY, so we can do IPv6 too.
(Renamed from "pim_is_addr_any" for "pim_addr_*" naming pattern, and
type fixed to bool.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... and replace with `%pSG` printfrr specifier. This actually used a
static buffer in the formatting function, so subsequent formatting would
overwrite earlier uses.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
frr-pim.yang, created a list of address family under pim
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
Mostly just 2 sed calls:
- `sed -e 's%struct prefix_sg%pim_sgaddr%g'`
- `sed -e 's%memset(&sg, 0, sizeof(pim_sgaddr));%memset(\&sg, 0, sizeof(sg));%g'`
Plus a bunch of fixing whatever that broke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Problem:
=======
Generate query once cli is generating IGMPv2 report for IGMPv3 enabled interface
Description:
===========
If the version is not specified in the cli, it was taking version 2 as default
Fix:
===
If the version is not specified in the cli along with ip igmp generate-query-once,
the default will be the version enabled on that interface.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_sock to struct gm_sock, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_group to struct gm_group, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_source to struct gm_source, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Fix:
====
Modifying name of struct igmp_join to struct gm_join, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Abhishek N R abnr@vmware.com
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
... where it actually belongs. And make a bunch of stuff static, since
it's no longer used across files now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The Bootstrap message RX path needs a RPF check for the BSR address,
and this is implemented both incorrectly as well as quite ugly.
Clean up and fix case when we have multiple interfaces to the same LAN
and/or ECMP nexthops (both would cause message duplication, the former
can even cause BSM forwarding loops.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
enum based switches should never use default. It makes
it very hard to fix and find issues when the enum is
changed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Deleting a mesh-group member no longer deletes the mesh-group.
Complete bug description at:
https://github.com/FRRouting/frr/issues/9664
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
This `XFREE()` call is in plainly in the wrong spot. `rp_all` (the
224.0.0.0/4 entry) isn't supposed to be free'd ever, and the
conditional above makes quite clear that it remains in use.
It may be possible to exploit this as a heap corruption bug, maybe even
as RCE. I haven't tried; I randomly noticed this while working on the
BSM code. Luckily this code is only run by the CLI for the clear
command, so the surface is very small.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Intentionally separate here because the previous patch does a whole
bunch of "move stuff up 1 level of indentation", and reviewing that is
easier when you can use the ignore-whitespace option on diff.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Some no commands were not accepting values and left us in
a situation where a cut-n-paste of the non-no line would
not be properly accepted.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Allow the join-prune interval to be as small as 5 seconds instead
of limiting the value to 60.
This can and will come at a price of being able to converge less
mroutes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
1. Add the querierIP object to igmp_sock datastruct to save the IP address of the querier.
Management of the querierIP object is added.
2. To show the querier IP address in the CLI "show ip igmp interface".
3. To add the json object querierIP for querier IP address in the json CLI "show ip igmp interface json".
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
