The `show ipv6 route json` command displays the IPv6 routing table in
JSON format, including SRv6 SIDs. For each SRv6 SID, it provides
behavior and SID attributes. However, it does not include the SID
structure.
This commit adds the SID structure to the SRv6 SID JSON output.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
We were hashing 4 bytes of the address. Even for IPv6 addresses.
Oops.
The reason this was done was to try to make it faster, but made a
complex maze out of everything. Time for a refactor.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In zebra_mpls.c it has a usage of MTYPE_NH_LABEL which is
defined in both lib/nexthop.c and zebra/zebra_mpls.c. The
usage in zebra_mpls.c is a realloc. This leads to a crash:
(gdb) bt
0 __pthread_kill_implementation (no_tid=0, signo=6, threadid=126487246404032) at ./nptl/pthread_kill.c:44
1 __pthread_kill_internal (signo=6, threadid=126487246404032) at ./nptl/pthread_kill.c:78
2 __GI___pthread_kill (threadid=126487246404032, signo=signo@entry=6) at ./nptl/pthread_kill.c:89
3 0x0000730a1b442476 in __GI_raise (sig=6) at ../sysdeps/posix/raise.c:26
4 0x0000730a1b94fb18 in core_handler (signo=6, siginfo=0x7ffeed1e07b0, context=0x7ffeed1e0680) at lib/sigevent.c:268
5 <signal handler called>
6 __pthread_kill_implementation (no_tid=0, signo=6, threadid=126487246404032) at ./nptl/pthread_kill.c:44
7 __pthread_kill_internal (signo=6, threadid=126487246404032) at ./nptl/pthread_kill.c:78
8 __GI___pthread_kill (threadid=126487246404032, signo=signo@entry=6) at ./nptl/pthread_kill.c:89
9 0x0000730a1b442476 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
10 0x0000730a1b4287f3 in __GI_abort () at ./stdlib/abort.c:79
11 0x0000730a1b9984f5 in _zlog_assert_failed (xref=0x730a1ba59480 <_xref.16>, extra=0x0) at lib/zlog.c:789
12 0x0000730a1b8f8908 in mt_count_free (mt=0x576e0edda520 <MTYPE_NH_LABEL>, ptr=0x576e36617b80) at lib/memory.c:74
13 0x0000730a1b8f8a59 in qrealloc (mt=0x576e0edda520 <MTYPE_NH_LABEL>, ptr=0x576e36617b80, size=16) at lib/memory.c:112
14 0x0000576e0ec85e2e in nhlfe_out_label_update (nhlfe=0x576e368895f0, nh_label=0x576e3660e9b0) at zebra/zebra_mpls.c:1462
15 0x0000576e0ec833ff in lsp_install (zvrf=0x576e3655fb50, label=17, rn=0x576e366197c0, re=0x576e3660a590) at zebra/zebra_mpls.c:224
16 0x0000576e0ec87c34 in zebra_mpls_lsp_install (zvrf=0x576e3655fb50, rn=0x576e366197c0, re=0x576e3660a590) at zebra/zebra_mpls.c:2215
17 0x0000576e0ecbb427 in rib_process_update_fib (zvrf=0x576e3655fb50, rn=0x576e366197c0, old=0x576e36619660, new=0x576e3660a590) at zebra/zebra_rib.c:1084
18 0x0000576e0ecbc230 in rib_process (rn=0x576e366197c0) at zebra/zebra_rib.c:1480
19 0x0000576e0ecbee04 in process_subq_route (lnode=0x576e368e0270, qindex=8 '\b') at zebra/zebra_rib.c:2661
20 0x0000576e0ecc0711 in process_subq (subq=0x576e3653fc80, qindex=META_QUEUE_BGP) at zebra/zebra_rib.c:3226
21 0x0000576e0ecc07f9 in meta_queue_process (dummy=0x576e3653fae0, data=0x576e3653fb80) at zebra/zebra_rib.c:3265
22 0x0000730a1b97d2a9 in work_queue_run (thread=0x7ffeed1e3f30) at lib/workqueue.c:282
23 0x0000730a1b96b039 in event_call (thread=0x7ffeed1e3f30) at lib/event.c:1996
24 0x0000730a1b8e4d2d in frr_run (master=0x576e36277e10) at lib/libfrr.c:1232
25 0x0000576e0ec35ca9 in main (argc=7, argv=0x7ffeed1e4208) at zebra/main.c:536
Clearly replacing a label stack is an operation that should be owned by
lib/nexthop.c. So lets move this function into there and have
zebra_mpls.c just call the function to replace the label stack.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently nexthop weight is a discriminator on whether or not
a nexthop matches. There is a need to no use the weight as
part of this comparison function so let's add a boolean to
allow us to say use this or not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are two ways of iterating over nexthops of a given
route entry.
- Either only the main nexthop are taken into account
(which is the case today when attempting to install an
LSP entry on a BGP connected labeled route.
- Or by taking into account nexthops that are resolved
and linked in nexthop->resolved of the previous nexthop
which has RECURSIVE flag set. This second case has to be
taken into account in the case where recursive routes may
be used to install an LSP entry.
Introduce a new API in nexthop that will parse over the
appropriate nexthop, if the nexthop-resolution flag is turned
on or not on the given VRF.
Use that API in the lsp_install() function so as to walk
over the appropriate nexthops.
Co-developed-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
The SR-TE color of nexthop should be displayed in all situations.
Fixes: 553c804846 ("zebra: fix JSON fields for 'show ip/ipv6 nht'")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The zebra_nexthop_vty_helper() and zebra_nexthop_json_helper()
functions could be very helpful to display nexthop information
from whatever daemon.
Move the core function in the nexthop_vty_helper() and the
nexthop_json_helper() function. The zebra API call remains
unchanged.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In zebra_interface_nhg_reinstall zebra is checking that the
nhg is a singleton and not a blackhole nhg. This was originally
done with checking that the nexthop is a NEXTHOP_TYPE_IFINDEX,
NEXTHOP_TYPE_IPV4_IFINDEX and NEXTHOP_TYPE_IPV6_IFINDEX. This
was excluding NEXTHOP_TYPE_IPV4 and NEXTHOP_TYPE_IPV6. These
were both possible to be received and maintained from the upper
level protocol for when a route is being recursively resolved.
If we have gotten to this point in zebra_interface_nhg_reinstall
the nexthop group has already been installed at least once
and we *know* that it is actually a valid nexthop. What the
test is really trying to do is ensure that we are not reinstalling
a blackhole nexthop group( Which is not possible to even be
here by the way, but safety first! ). So let's change
to test for that instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Two changes for debug:
1. Add a field to indicate its vrf for nexthop. When the interface changes
vrf, we can't easily know the vrf of this nexthop according to current log.
2. Add a field to indicate operation type. We can't know whether to add or
remove route according to current log.
Before:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6] nh type 3 flags 0x1
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
```
After:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6 vrfid 9]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6 vrfid 8] nh type 3 flags 0x1
Route 77.75.1.0/24(8) (add) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) (delete) queued for processing into sub-queue Early Route Processing
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Intermittently zebra and kernel are out of sync
when interface flaps and the add's/dels are in
same processing queue and zebra assumes no change in nexthop.
Hence we need to bring in a reinstall to kernel
of the nexthops and routes to sync their states.
Upon interface flap kernel would have deleted NHGs
associated to a interface (the one flapped),
zebra retains NHGs for 3 mins even though upper
layer protocol removes the nexthops (associated NHG).
As part of interface address add ,
re-add singleton NHGs associated to interface.
Ticket: #3173663
Issue: 3173663
Signed-off-by: Ashwini Reddy <ashred@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Abstract the usage of '%pNHs' so that when nexthop groups get
a new special printfrr that it can take advantage of this
functionality too.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
This commit add new nexthop's addional object for SRv6
routing about seg6 route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6 routes.
seg6 routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at
this commit. later commit add that. This commit add
only nexthop additional object and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new nexthop's addional
object for SRv6 routing about seg6local route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6local routes.
seg6local routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at this commit.
later commit add that. This commit add only nexthop additional object
and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Add a simpler, more limited nexthop comparison function. This
compares a few key attributes, such as vrf, gateway, labels.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Allowing printfrr extensions to directly write to the output buffer has
a few advantages:
- there is no arbitrary length limit imposed (previously 64)
- the output doesn't need to be copied another time
- the extension can directly use bprintfrr() to put together pieces
The downside is that the theoretical length (regardless of available
buffer space) must be computed correctly.
Extended unit tests to test these paths a bit more thoroughly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Instead of crashing, print "NULL" when printfrr callback for
nexthops is called for a NULL nexthop argument.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Remove the nexthop_same_firsthop() api and just call nexthop_same().
Not entirely sure why we were using this function in the first place,
but now we are just marking dupes with it so lets just call a
common function and avoid issues.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Initial changes to support a nexthop with multiple backups. Lib
changes to hold a small array in each primary, zapi message
changes to support sending multiple backups, and daemon
changes to show commands to support multiple backups. The config
input for multiple backup indices is not present here.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Make the nexthop_copy/nexthop_dup APIs more consistent by
adding a secondary, non-recursive, version of them. Before,
it was inconsistent whether the APIs were expected to copy
recursive info or not. Make it clear now that the default is
recursive info is copied unless the _no_recurse() version is
called. These APIs are not heavily used so it is fine to
change them for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Default all nexthop weights to one. The linux kernel does
some weird stuff where it adds one to all nexthop weight values
it gets. So, we added df7fb5800b with
some special subtracing/adding to account for this. Though, that patch
did not account for the default case of the weight being zero for
elements in the group.
Hence, this patch defaults the nexthop weight to one during creation.
This should be a valid value on all platforms anyway so shouldn't
affect anything.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Linux has the idea of allowing a weight to be sent
down as part of a nexthop group to allow the kernel
to weight particular nexthop paths a bit more or less
than others.
See:
http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-links.html
Allow for installation into the kernel using the weight attribute
associated with the nexthop.
This code is foundational in that it just sets up the ability
to do this, we do not use it yet. Further commits will
allow for the pass through of this data from upper level protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
