Implement common code for debug status output and remove daemon-specific
code that is duplicated everywhere.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If a command is not marked as `YANG`-converted, the current command
batching buffer is flushed before executing the command. We shouldn't
flush the buffer when executing an `exit` command. It should only be
flushed if the next command is not `YANG`-converted, which is checked by
the command itself, not the previous `exit`.
Fixes#15706.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Use consistent `e_somepath` names for expanded versions of `somepath`.
Also remove all paths from `config.h` and put them into
`lib/config_paths.h` - this is to make more obvious when someone is
doing something probably not quite properly structured.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These functions load daemon-specific persistent state from
`/var/lib/frr` and supersede open-coded variants of similar calls in
ospfd, ospf6d and isisd to save GR state and/or sequence numbers.
Unlike the open-coded variants, the save call correctly `fsync()`s the
saved data to ensure disk contents are consistent.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move away from things like "lock if not locked" type code, require the
user has locked prior to geting to that point.
For now we warn if we are taking a lock we already had; however, this
should really be a failure point.
New requirements:
SETCFG -
not implicit commit - requires user has locked candidate DS and they
must unlock after
implicit commit - requires user has locked candidate and running DS
both locks will be unlocked on reply to the SETCFG
COMMITCFG -
requires user has locked candidate and running DS and they must unlock
after
rollback - this code now get both locks and then does an unlock and
early return thing on the adapter side. It needs to be un-special
cased in follow up work that would also include tests for this
functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
When issue vtysh command with ?, the initial buf size for the
element is 16. Then it would loop through each element in the cmd
output vector. If the required size for printing out the next
element is larger than the current buf size, realloc the buf memory
by doubling the current buf size regardless of the actual size
that's needed. This would cause vtysh core when the doubled size
is not enough for the next element.
Signed-off-by: Yuan Yuan <yyuanam@amazon.com>
When the user specifies `--command-log-always` in CLI arguments then also log
commands executed from loading the config file.
Signed-off-by: Christian Hopps <chopps@labn.net>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
AS number can be defined as an unsigned long number, or
two uint16 values separated by a period (.). The possible
valus are:
- usual 32 bit values : [1;2^32 -1]
- <1.65535>.<0.65535> for dot notation
- <0.65535>.<0.65535> for dot+ notation.
The 0.0 value is forbidden when configuring BGP instances
or peer configurations.
A new ASN type is added for parsing in the vty.
The following commands use that new identifier:
- router bgp ..
- bgp confederation ..
- neighbor <> remote-as <>
- neighbor <> local-as <>
- clear ip bgp <>
- route-map / set as-path <>
An asn library is available in lib/ and provides some
services:
- convert an as string into an as number.
- parse an as path list string and extract a number.
- convert an as number into a string.
Also, the bgp tests forge an as_zero_path, and to do that,
an API to relax the possibility to have a 0 as value is
specifically called from the tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It already "looks" like a bitmask, but we currently can't flag a command
both YANG and HIDDEN at the same time. It really should be a bitmask.
Also clarify DEPRECATED behaviour (or the absence thereof.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It will be used to allow/deny using IPv4 reserved ranges (Class E) for Zebra
(configuring interface address) or BGP (allow next-hop to be from this range).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
End operator is showing:
!
frr version 8.0.1
frr defaults traditional
hostname test.example.com
domainname
domainname should not be printed in this case at all. I do not
see any mechanism in current code that this could happen, but
what do I know? Put some extra stupid insurance in place
to prevent bad config from being generated.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add to lib/command.c the ability to remember the
release/version/system information and to allow
`show version` to dump some of it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This allows defining a CLI command like this:
`[no] some setting ![VALUE]`
with VALUE being optional for the "no" form, but required for the
positive form. It's just a `[...]` where the empty branch can only be
taken for commands starting with `no`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Instead of adding a separate case clause for every node, just find the
node structure in the global list and get its parent node from there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When exiting from link-params node, we must not decrement xpath_index
because it is not incremented when entering the node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
